================================================================
NOTES ON
Installing IC-Card+ Ethernet PC Card
For FTP PC/TCP Users
================================================================
(c) 1997-1998 Copyright ALL RIGHTS RESERVED
This document contains installation notes, which is not included in the
IC-Card+ Ethernet PC Card USER'S GUIDE or onscreen instructions,
for FTP PC/TCP users regarding IC-Card+ PC Card installation.
This document contains information on the following topics:
1.0 Introduction
2.0 Installation Notes
___________________________________________________________________
1.0 Introduction
--------------------
FTP PC/TCP users please also refer to the following:
-------------------------------------------------------------------
File Description/Installation notes
-------------------------------------------------------------------
README.TXT For all users
\PKTDRV\README.TXT For all Packet driver users
2.0 Installation Notes
---------------------------
Two methods available:
Method 1
First, in your CONFIG.SYS file, include the ICARDP command.
Format:
DEVICE = ICARDP.SYS [/option] <packet_int_no>
<packet_int_no> is the software interrupt vector number used
by the packet driver program. This can be
from 96 to 128.
/d Delay Initial - The driver program will not
initialize the network interface card until
the packet driver program is accessed by its
upper layer program.
/w The -w parameter is for use only in the
Windows environment.
Please refer to the \PKTDRV\README.TXT file and INST_DOS.TXT file
on DISK for more information.
Method 2 Issue ICARDP command at the DOS command prompt.
Format:
ICARDP [/option] <packet_int_no>
<packet_int_no> is the software interrupt vector number used
by the packet driver program. This can be
from 96 to 128.
/d Delay Initial - The driver program will not
initialize the network interface card until
the packet driver program is accessed by its
upper layer program.
/w The -w parameter is for use only in the
Windows environment.
Please refer to the INST_DOS.TXT file on DISK for more parameters.
Run the ETHDRV.EXE and IDRIVE.EXE device driver programs.
These programs are provided by FTP.
FTP's PC/TCP and associated programs are ready to used.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.