PROTOCOL.INI Driver File Contents (linksys100tx.zip)

;Drivername
    DriverName = "LNE100$"
;MEDIA_MODE select the connect type of the adapter
;  TP_10  10MB
;  TP_10_FD 10MB+Full Duplex
;  TP_100_FD 100MB+Full Duplex
;  TP_100    100MB
;  BNC
;  AUI
;  AUTODETECT  autodetect by the driver,default value
        MEDIA_MODE=AUTODETECT
;TX_BUFS Tx descriptor numbers, default 4,less then 8
        TX_BUFS=4
;RX_BUFS Rx descriptor numbers, default 4,less then 8
        RX_BUFS=4

                                
;-->SLOT=8
;
; BUSNO=n, n=0..7 specifies the PCI bus number to search for the adapter.
; In most computers today there is only a single PCI bus, number 0.
; However, the PCI archixtecture allow for multiple PCI busses.  If this
; keyword isn't specified, the driver will search all busses for a
; adapter, so this keyword isn't required unless there are multiple
; my Ethernet Adapters in the computer.


; NETADDRESS = "123456789012"
;
;This parameter overrides the network address of the network
;adapter card.  The value of this parameter is a hexadecimal string of
;12 digits, as in 123456789012.  The address must be unique among all
;other network adapter addresses on the network.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.30