README.TXT Driver File Contents (linksys100tx.zip)

  Linksys EtherFast Series LAN Cards README File
  for ACPI funtion for DOS
  Copyright (C) 1999 Linksys, All Rights Reserved

  ------------------------------------------------  

  Setup
  Technical Support


  ------------------------------------------------
  SETUP
  ------------------------------------------------  

  The EtherFast disk contains a ACPI test utility in the
  \ACPI\ directory.  The utility is called "WOL_SET.EXE" ,
  and it can be run by simply issuing its filename at the
  DOS prompt.
  Magic paket test:
        In this item, it tests both of ACPI (Advence Configuration
        and Power Interface) and WOL (Wake On LAN) functions.
        Two PCs is necessary to execute this test function.
        When the PC runs "be waked up" function, the PC's mother
        board must support ACPI and WOL. And the standby power's
        current of ATX power supply requests least than 300mA.

        Utility program will test the WOL function of the network
        adapter. It stay wake-up state(D3 cold) when you shut down
        the PC, and the PC will boot up when it receive a Magic
        Packet.

        The other PC that running "send magic packet" is auxiliary and
        controls the PC ("be waked up"). Input the MAC address
        (Node address) of remote PC that enter wake-up state.
        The control PC will send a Magic format Packet to wake up it
        ("be waked up PC").



  ------------------------------------------------  
           HOW TO GET TECHNICAL SUPPORT
  ------------------------------------------------

  Technical Support Hotline    (949) 261-1288
  Fax                          (949) 261-8868  
  E-mail Address               support@linksys.com
  Web Site                     http://www.linksys.com
  FTP File Transfer Site       ftp.linksys.com




Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.42