================================================================
CASIO Update Pack Version 1.04
================================================================
## Important!
This Update Pack is intended for the CASSIOPEIA models shown below. The
Update Pack installer detects the CASSIOPEIA model that is being updated
and installs the required update files. Never try to install the Update Pack on
any other device or model other than those specifically listed below.
<<Applicable CASSIOPEIA Models>>
EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I, EM-505S
-------------------------------------------------------------------------
<<CASIO Update Pack Version 1.04 Features>>
"CASIO Update Pack Version 1.04" fixes and enhances the following
capabilities of the applicable CASSIOPEIA model.
1. Fixes the display driver to eliminate problems of the MPEG player and other
software with correct drawing of certain API.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
2. Speeds up writing to SD cards.
(Applicable Models: EM-500, EM-500G, EM-505F, EM-505I, EM-505S)
3. Fixes the display driver so [+] symbol appears next to folders on Inbox.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
4. Fixes time counter so it is displayed correctly when playing Solitaire while
remote control earphones are plugged in.
(Applicable Models: EM-500)
5. Fixes time counter so cursor flashes normally, system does not lock up, and
other problems do not occur when Pocket Excel is started up while remote
control earphones are plugged in.
(Applicable Models: EM-500)
6. Fixes the display driver so white dots do not appear on the screen while
playing Solitaire.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
7. Updates auto power off so power is turned off automatically even if a key
is kept depressed for five minutes after power is turned on.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
8. Speeds up display response.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
9. Fixes the update software so all E-125s allow to install the update pack.
(Applicable Models: E-125)
10. Fixes a problem that makes it impossible to correctly configure any stop
bit setting other than 1 when "Hayes Compatible Modem on COM 1" is
selected and the application is using the COM1 serial connection.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
11. Fixs a problem that was causing corruption of data sent at low baud rates
when "Hayes Compatible Modem on COM 1" is selected and the application
is using the COM1 serial connection.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
12. Fixes a problem that occurs when data backup to a PC over an ActiveSync
USB connection is interrupted.
(Applicable Models: EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I,
EM-505S)
Note that communication problems may also be caused by incompatibility
between a particular PC and USB data communications.
-------------------------------------------------------------------------
We recommend that you install the program before using your CASSIOPEIA.
<<Installing CASIO Update Pack Version 1.04>>
1. If you already install CASIO Update Pack Version 1.00 or CASIO Update
Pack Version 1.01, uninstall it.
2. Connect your Pocket PC and PC before downloading Update Pack Version
1.04 to your Pocket PC.
3. Double click the Setup.exe and operate PC according to messages.
4. Once installation is completed, reset the Pocket PC by pressing the reset
button. If you don't press the reset button, program don't work.
(Memory contents are not erased even if the reset button is pressed.)
## The message "On the next mobile device connection, the installed
applications will be downloaded to the device." will be displayed, if you
install Update Pack Version 1.04 without connecting your Pocket PC and PC.
Tap "OK".
## You need to re-install this program when the memory on Pocket PC is
initialized.
You don't need to re-install this program when you only press the reset
button.
## The message ""CASIO Update Pack Ver 1.04" is already installed.
Do you want to proceed with the re-install/upgrade?" indicates that
CASIO Update Pack Version 1.04 is already installed on your Pocket PC.
In this case, we recommend that you cancel the installation, use
the "Remove Programs" applet on the Pocket PC /Start/Settings to
remove the existing CASIO Update Pack Version 1.04, and then re-install it.
-------------------------------------------------------------------------
<<Uninstalling CASIO Update Pack Version 1.04>>
1. Tap "Start/Settings/Remove Programs" on Pocket PC.
2. Tap "CASIO Update Pack Ver 1.04" and tap "Remove".
3. Tap "Yes" when the message "The selected program will be permanently
removed. You may reload it from your desktop computer. Are you sure you
want to remove it?" is displayed.
4. Tap "OK".
==================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.