========================================================= Mail Version 1.10(US) ========================================================= Important! This program is designed to run on the following CASSIOPEIA models only. Never try to use this program on a device other than those specified below. Supported Model: BE-300 Mail is an application that lets you send and receive mail over the Internet. --------------------------------------------------------- About This Update --------------------------------------------------------- <> Header Only Receive This feature lets you pick up only the header information of messages waiting on the mail server, and delete specific messages without picking them up. This means you can pick up only the messages you want. <> With this update, you can configure your CASSIOPEIA to terminal a dial-up connection immediately after an e-mail send/receive operation. With previous versions, automatic disconnect was performed about 30 seconds after the mail send/receive operation. With this update, however, the dial-up connection can be disconnected automatically immediately, without waiting. --------------------------------------------------------- To receive only headers first. --------------------------------------------------------- 1. On the Mail initial startup screen (account list screen), tap the [Send/Receive] button. 2. On the screen that appears, select (check) the following option. [ ] Receive only headers first. 3. Now when you perform a mail pickup operation, only header information is picked up first. 4. On the header list screen, select (check) either the messages you want to pick up or the messages you want to delete from the server. 5. Clicking the [Receive Body] button picks up the mail messages you selected in step 4. Tapping the [Delete] button deletes the mail messages you selected in step 4, without picking them up. Important! # Once you delete a mail message from your mail server, there is no way to recover it. # Your CASSIOPEIA connects to the mail server to receive header information. Make sure you are in a quiet location where reception is stable. --------------------------------------------------------- To configure the CASSIOPEIA for immediate disconnect following a mail send/receive operation --------------------------------------------------------- 1. On the Mail initial startup screen (account list screen), tap the [Settings] button. 2. On the setup screen that appears, tap the [Auto] tab. 3. On the [Auto] tab, select (check) the "Disconnect after send/receive." option. Turning on this option causes the dial-up connection to be terminated immediately after an e-mail send/receive operation, without displaying a confirmation message. Important! # If you turn off the "Disconnect after send/receive." option, the dial-up connection is maintained after the e-mail send/receive operation is complete. In this case, take care to make sure you do not forget to disconnect manually. --------------------------------------------------------- Operating Precautions --------------------------------------------------------- <> Before using your CASSIOPEIA to send and receive mail, you must first contract with an Internet Service Provider (ISP). You also need to use Connections to configure the required connection settings. <> Mail does not support mail exchange with an IMAP server. <> Mail messages that are larger than 1MB, including attachments, are not received. You should receive such messages on your PC, so they are deleted from your mail server. <> The maximum size of attachments for one mail message is 1MB total. <> Mail messages with very long headers can cause mail receipt to fail. <> Mail messages body text is cut off after 64 kbytes. <> You can view an image attached to a mail message by double-tapping the image file in the Mail application. Image files that can be displayed by the Mail application are JPEG, CompuServe-GIF, Windows-BMP, and PNG. Note that the maximum size image that can be displayed is 640 x 480 pixels. <> Note that you cannot directly display HTML format mail messages inside the Mail application. To display an HTML format mail message, tap the [Html Mail] button to start up the Browser application and view the mail message. <> HTML mail messages sent from some mail software (such as Netscape Messenger 4.X, etc.) may not be displayed properly. <> Opening the folder can take some time when you have a large volume of mail messages stored inside it. If this happens, create more folders and move some of the messages there, or move some messages to storage card folders. <> Receipt of a large number of attached files or receipt of a large volume of mail over a long time can cause the user data storage area to become full, and make it impossible to send or receive any more memory. If this happens, delete mail messages you no longer need or move some messages to a storage card to free up memory. <> Data can be cut off or an error can occur if you use the "Send to" function to send data to another application, and the data is very long. When using "Send to" to send data from Mail to Calendar, an error may occur if the data is not exactly the correct format. --------------------------------------------------------- To install this update --------------------------------------------------------- Installation Precautions # Mail is a [Main] memory only application. You cannot install it in [Card] memory. # You do not need to install Mail if the following message appears during installation: "Installation interrupted. The same version already exists in CASSIOPEIA, or this is the older version. Reset your CASSIOPEIA." You do need to reset your CASSIOPEIA, however. If you still want to re-install Mail after the above message appears, use the procedure below to uninstall it and then re-install. 1. Prepare for installation. Install the PC Connect application on your PC, and then connect your CASSIOPEIA to your PC. See "Chapter 6 Using Your CASSIOPEIA with Your Computer" in your BE-300 User's Guide for more information. 2. Double-click SETUP.EXE. 3. Follow the instructions that appear on your computer screen. 4. Your CASSIOPEIA will reset automatically after installation is complete. Following the reset operation, a new Mail will be appeared on the Top Menu. 5. To start up Mail, tap its icon on the Top Menu. --------------------------------------------------------- To uninstall the update --------------------------------------------------------- 1. Press the Top Menu button. 2. Tap [Edit] and then [Delete Application]. 3. Double-tap the application you want to uninstall. 4. In response to the confirmation dialog box that appears, tap [Yes].Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.