======================================================================
ALi ATA/RAID Controller and SATA/RAID controller driver
Copyright 2003-2004 ALi Corporation.
All Rights Reserved
======================================================================
------------
INTRODUCTION
------------
This driver supports ALi ATA/RAID Controller and SATA/RAID controller.
Install driver during WindowsNT4.0 installation
0. After you unpack driver, please copy files and subdirectory under
C:\Conceptronic to a floppy diskette (called driver diskette).
Therefore, in root directory of floppy diskette you will see:
(1) Files "disk1" and "txtsetup.oem",
(2) Directory "win98_me", "win_nt", "win_2000", "win_xp" and related
driver files in each directory.
(please refer to "Driver File List" as below)
1. Press F6 key when the installation program prompt "Setup is
inspecting your computer's hardware configuration";
2. The installation will continue. Later, installation program will
prompt user to press S key to specify other devices, then press
S key;
3. Within the follow-up device type window, select Other, then
press ENTER to confirm;
4. Installation program will prompt user to insert the driver
diskette and then press ENTER to confirm;
5. Within the follow-up window, select ALi SATA/RAID Controller,
then press ENTER to confirm;
6. The follow-up window will list out the devices to be installed,
in which selected ALi controller(s) will be included;
7. Repeat step 2, but select ALi ATA/RAID Controller at step 5;
If both controllers are installed, go to next step;
8. If users want to install other devices, please operate at this time.
If all devices have been installed, go to next step
9. Press ENTER to confirm the devices to be installed and continue
the installation of Windows NT4.0.
----------------------------------------------------------------------
Install driver during Windows 2000 installation
0. After you unpack driver, please copy files under subdirectory
C:\Conceptronic to the root directory of floppy diskette (called driver
diskette).
Therefore, in root directory of floppy diskette you will see:
(1) Files "disk1" and "txtsetup.oem",
(2) Directory "win98_me", "win_nt", "win_2000", "win_xp" and related
driver files in each directory.
(please refer to "Driver File List" as below)
1. Booting from CD-ROM, when the Windows 2000 Setup blue screen
appear and prompt user to Press F6 if you need to install third
party SCSI or RAID driver, please press F6 key:
2. The setup program will continue, later when the setup program
prompts user to specify additional adapters, please press S
Key.
3. Then the setup program prompt user to insert the driver
diskette. Please insert the driver diskette, then press ENTER
to continue;
4. The follow-up window will list out the installation choices,
please select ALi SATA/RAID Controller for Windows 2000 and
press ENTER to continue;
5. The Follow-up window will list out the devices to be installed,
in which selected ALi controller should be included;
6. Repeat step 2, but select ALi ATA/RAID Controller at step 5;
If both controllers are installed, go to next step;
7 If users want to install other devices, please operate at this time.
If all devices have been successfully installed, go to next step.
8. Press ENTER to continue Windows 2000 setup.
----------------------------------------------------------------------
Install driver during Windows XP installation
0. After you unpack driver, please copy files under subdirectory
C:\Conceptronic to the root directory of floppy diskette (called driver
diskette).
Therefore, in root directory of floppy diskette you will see:
(1) Files "disk1" and "txtsetup.oem",
(2) Directory "win98_me", "win_nt", "win_2000", "win_xp" and related
driver files in each directory.
(please refer to "Driver File List" as below)
1. Booting from CD-ROM, when the Windows XP Setup blue screen
appear and prompt user to Press F6 if you need to install third
party SCSI or RAID driver, please press F6 key:
2. The setup program will continue, later when the setup program
prompts user to specify additional adapters, please press S
Key.
3. Then the setup program will prompt user to insert the driver
diskette. Please insert the driver diskette, then press ENTER
to continue;
4. The follow-up window will list out the installation choices,
please select ALi ALi SATA/RAID Controller for Windows XP
and press ENTER to continue;
5. The follow-up window will list out the devices to be installed,
in which selected ALi controller(s) should be included;
6. Repeat step 2, but select ALi ATA/RAID Controller at step 5;
If both controllers are installed, go to next step;
7 If users want to install other devices, please operate at this time.
If all devices have been successfully installed, please go to next
step.
8. Press ENTER to continue Windows XP setup.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.