README file for CD-ROM device driver for IDE V1.0
===================================================================
I. Ðî
II. Kv«ð
III. CXg[Vû@
IV. CXg[VãÌ«Ýè
I. Ðî
±Ì CD-ROM pbP[WÉÍA[eBeB[\tgª®µÜ·B¨g¢Ì CD-ROM ðp\RÉÚ±µ²gpÉÈéÉÍ CD-ROM hCo[ÌCXg[ªKvÅ·B
t@C
hCuCXg[fBXNÉÍAȺÌt@CªÜÜêĢܷB
READMEJ.TXT --- [U[KCh
INSTALL.EXE --- CD-ROM CXg[vO
ACERCD.SYS --- CD-ROM foCXhCo[
II. Kv«
n[hEFAKv«
1. IBM PC/AT ܽÍÝ·@i80386x[XVXe§j
2. EGA OtBbNEfBXvCÈãiVGA §j
3. 2MB RAM Èã
4. ó«IDE\PbgPÂ
5. CD-ROM hCu
\tgEFAKv«
1. }CN\tgEChEY3.1È~
2. MS-DOS 5.0 È~
3. MS-DOS CDGNeViMSCDEX 2.21jÈ~
III. CXg[Vè
ȺÌXebvÉ]¢ACD-ROM foCXhCo[ÌCXg[ðsÁľ³¢B
1. æ¸ACXg[VfBXNð 3.5 C`tbs[fBXNhCuÉ}üµÄ¾³¢B
2. fBNg[ðtbs[fBXNhCuÉϦÄA»µÄ DOS vvgɨ¢ÄȺÌR}hð^CvµÄ¾³¢B
INSTALL<Enter>
3. CXg[VÌæÊw}É]¢CXg[𮹵ľ³¢B
4. hCo[ðANeBuÉ·é½ßAVXeðu[gµÄ¾³¢B
±¯ÄEnterL[ð·±ÆÅftHgÌÝèÅCXg[·é±ÆªÅ«Ü·BfBNgiftHgÅÍ C:\ACERjÍCXg[ÉìçêA»±É CD-ROM hCo[ªüèÜ·BAUTOEXEC.BAT Æ CONFIG.SYS t@CÍAC³³êÄȺÌsªÇÁ³êÜ·B
CONFIG.SYS
[common]
DEVICE=C:\ACERCD\ACERCD.SYS /D:ACERCD00
LASTDRIVE=N
AUTOEXEC.BAT
C:\DOS\MSCDEX.EXE /D:ACERCD00
LASTDRIVE=N
IV.CXg[VãÌÝèÌÏX
CD-ROMhCo[ÌÝèðF¯Å«éæ¤É·éÉÍAEDIT.COMÌæ¤ÈeLXgGfB^[ðg¢ACONFIG.SYSÆAUTOEXEC.BATÌ2ÂÌR}hCðC³µÄ¾³¢B»µÄANeBuÉ·é½ßÉAVXeðÄn®µÄ¾³¢B
CONFIG.SYS t@CÌÏX
DEVICE=<path>\ACERCD.SYS /D:<device_name>
<device_name>ÍAMSCDEX Å èfoCXhCo[ðwè·é½ßÉgíêéB
<device_name>ÍAÅå 8 LN^[ÜÅwèÂ\B
á:
DEVICE=C:\MYDRV\ACERCD.SYS /D:ACERCD01
AUTOEXEC.BAT t@CÌÏX
MSCDEX /D:driver [/E ] [/K ] [/S ] [/V ] [ /L:letter] [ /M:number]
áF
C:\DOS\MSCDEX /D:ACERCD01 /L:G /M:10
Ú×ÍAHELP MSCDEX ÆűÆÉæèAMSCDEX Ì MS-DOS ICwvðQÆ·é±Æª«Ü·B
V. FastCD
==========
FastCD is the "Software Cache" function which use the EMS memory to
accelerate CD-ROM access speed .
Because it uses EMS memory , you must add the following two lines into
your CONFIG.SYS :
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE RAM
And , to enable this function , you must attach an option papameter -
"/E" or "/e" to ACERCD.SYS :
DEVICE=C:\ACERCD\ACERCD.SYS /D:ACERCD00 /E , or
DEVICE=C:\ACERCD\ACERCD.SYS /D:ACERCD00 /e
These will reserve 2048 KB to be the Cache Buffer ; if you want to
tune the reserved cache size , attach the parameter "/E:#####" to
ACERCD.SYS :
DEVICE=C:\ACERCD\ACERCD.SYS /D:ACERCD00 /E:1024 , or
DEVICE=C:\ACERCD\ACERCD.SYS /D:ACERCD00 /e:5192
The maximum cache size is 32 MBytes , and its unit is 16 KB ,
For example : if we want 17 KB , it will reserve 32 KB .
Notice : IF EMS memory is NOT enough , ACERCD.SYS will DISABLE
FastCD .
================================= END =============================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.