;***********************************************************************
;
; OEMSETUP.INF
;
; The INF file is used to install 11Mbits Wireless LAN adapter
;
; Supported OS:
;
; Windows NT 4.0
;
; Supported adapters:
;
; 11M DS Wireless LAN PCMCIA/PCI Adapter
;
; Version 0.293
;
;***********************************************************************
;***********************************************************************
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;***********************************************************************
;
;
;---------------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;---------------------------------------------------------------------------
[Identify]
set Status = STATUS_SUCCESSFUL
set Identifier = NetAdapter
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;***********************************************************************
;
; End Indentify
;
;***********************************************************************
;***********************************************************************
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;***********************************************************************
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;=======================================================================
;
; ReturnOptions related symbols
;
;=======================================================================
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA and PCMCIA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
PCMCIA
PCI
;-----------------------------------------------------------------------
;
; Languages Supported in INF File
; Possible types are:
;
; ENG, FRN, SPN, ...
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
PRISM2_PCMCIA
PRISM2_PCI
[OptionsTextENG]
PRISM2_PCMCIA ="Conceptronic 11C PC Card"
PRISM2_PCI ="Conceptronic 11I PCI Adapter"
;***********************************************************************
;
; End ReturnOptions
;
;***********************************************************************
;***********************************************************************
; 4. Source Media Descriptions:
;
; DESCRIPTION: A detect section required in all oemsetup.inf files. It
; consists of a lied for each floppy disk that is part of
; the distribution set. The format is as follows:
;
; LineKey = [DiskDescription, TAGFILE = TagFileName]
;
; EXAMPLE: 1 = "Driver Disk #1", TAGFILE = disk1
;
;
; INPUT: None
;
; OUTPUT: None
;
;***********************************************************************
[Source Media Descriptions]
1 = "Conceptronic 11C/11I drivers"
;***********************************************************************
;
; End Source Media Descriptions
;
;***********************************************************************
;***********************************************************************
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;***********************************************************************
;------------------------------------------------------------------------
; CONSTANTS FOR USING DIALOGS
;------------------------------------------------------------------------
[IntersilPrism2FileConstants]
GenericAdapterName = "Conceptronic 11C PC Card"
[IntersilPrism2pcIFileConstants]
GenericAdapterName = "Conceptronic 11I PCI Adapter"
[FileConstants]
GenericDriverName = "Conceptronic 11C/11I Adapter driver"
GenericSysName = "cw10.sys"
GenericName = "CW10"
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Product Info
;
Manufacturer = "2L"
ProductMajorVersion = "0"
ProductMinorVersion = "3"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "CW10"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "cw10Sys ndisDriver cw10Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """cw10Sys"" yes no container"
NetRuleSoftwareClass = {"cw10Driver basic"}
NetRuleSoftwareBindable = {"cw10Driver cw10Adapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "CW10"
NetRuleHardwareType = "cw10 cw10Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"cw10Adapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaDataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\Database"
WLPortKeyName = "System\CurrentControlSet\Services\ndcprtns"
KeyWLPort = ""
Start_Manual = 3
Type_Sys = 1
VendorID = 5688
PRISM2_PCICFID = 285218360
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
; Enable debugging output
Set !G:DebugOutputControl = 1
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
read-syms GeneralConstants
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
read-syms IntersilPrism2FileConstants
else ;PRISM2_PCI
read-syms IntersilPrism2pcIFileConstants
endif
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PRISM II driver."
Shell $(UtilityInf), RegistryErrorString, "CANNOT_CONFIGURE_SOFTWARE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
install "Read-Defaults"
install "Parm-WriteReg"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
Ifstr(i) $(Option) == "PRISM2_PCI"
;
; Check the ID for PCI adapter
;
set-div DeviceID = $($(Option)CFID) 65536
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
; set CommonStatus = STATUS_USERCANCEL
set from = end
set to = end
goto nonfatalinfo
endif
Else ;PRISM2_PCMCIA
;
; Create/recreate the Registry's PCMCIA database entry for the CW10 adapter
;
Debug-Output "*** installadapter ***"
Debug-Output "PcmciaDataBaseKeyName = "$(PcmciaDataBaseKeyName)
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
set ManKeyName = "OEM\PRISM2 IEEE 802.11 PC-Card";
endif
Debug-Output "ManKeyName = "$(ManKeyName)
set KeyPcmciaDataBase = ""
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase
Shell "" ExCreateRegKey $(KeyPcmciaDataBase) $(ManKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
CloseRegKey $(KeyPcmciaDataBase)
goto ShellCodeError
endif
OpenRegKey $(KeyPcmciaDataBase) "" $(ManKeyName) $(MAXIMUM_ALLOWED) KeyTemp
SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)}
CloseRegKey $(KeyTemp)
OpenRegKey $(KeyPcmciaDataBase) "" $(ManKeyName) $(MAXIMUM_ALLOWED) KeyTemp
SetRegValue $(KeyTemp) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}
CloseRegKey $(KeyTemp)
CloseRegKey $(KeyPcmciaDataBase)
Debug-Output "Driver Value set in ManKey"
Endif ;endif PRISM2_PCMCIA
;
; Check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
Debug-Output "ProductKeyName already exists = "$(ProductKeyName)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Debug-Output "Cannot Install the same software again"
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Debug-Output "Add a new adapter card?"
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(WLPortKeyName) $(MAXIMUM_ALLOWED) KeyWLPort
Ifstr $(KeyWLPort) == $(KeyNull)
CreateRegKey $(!REG_H_LOCAL) {$(WLPortKeyName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyWLPort
set NewValueList = {{ErrorControl,$(NoTitle),$(!REG_VT_DWORD),$(ErrorControl_Default)},+
{Start,$(NoTitle),$(!REG_VT_DWORD),$(Start_Manual)},+
{Type,$(NoTitle),$(!REG_VT_DWORD),$(Type_Sys)},+
{Group,$(NoTitle),$(!REG_VT_SZ),$(Group_Default)}}
Shell $(UtilityInf), AddValueList, $(KeyWLPort), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
endif
CloseRegKey $(KeyWLPort)
;
; dll load addition
;
Debug-Output "Calling DoAskSource."
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Debug-Output "Done DoAskSource, calling Install-Dll."
;
; Run Dll for updating parameters
;
install "Install-Dll"
Debug-Output "Done Install-Dll, going to adaptersetup."
; We want to show Advance properties during install.
goto adaptersetup
goto skipoptions
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Debug-Output "Starting configureadapter."
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
install "Parm-ReadReg"
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
; Shell "" DebugConfiguration "before displaying dialog"
Debug-Output "Starting adaptersetup"
Set from = adapteroptions
adapteroptions = +
Debug-Output "Starting adapteroptions"
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
LoadLibrary "Disk 1" $(!STF_WINDOWSSYSPATH)\$(pcMDialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "Action: Continue"
install "Parm-UI-values"
set ExitButton = $(ButtonPressed)
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
Else ;PRISM2_PCI
LoadLibrary "Disk 1" $(!STF_WINDOWSSYSPATH)\$(pcIDialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "Action: Continue"
install "pcIParm-UI-values"
set ExitButton = $(ButtonPressed)
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
Endif ;endif PRISM2_PCI
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
Debug-Output "Starting skipoptions."
ifint $(OldVersionExisted) == $(TRUE)
Debug-Output "Older version existed."
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
Debug-Output "No older version."
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Debug-Output "Calling AddHardwareComponent."
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
;
; Only create Defaults key when installing driver
; Write defaults to registry before updating values in lists
;
Debug-Output "Starting Install-Defaults."
CreateRegKey $(KeyParameters) {"defaults",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" DefaultsKey
Ifstr(i) $(DefaultsKey) == $(KeyNull)
Debug-Output "Registry error: Create defaults subkey"
CloseRegKey $(KeyParameters)
goto fatalregistry
Endif
Debug-Output "CreateKey successful."
Shell $(UtilityInf), AddValueList, $(DefaultsKey), $(PRISMValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(DefaultsKey)
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Debug-Output "Adding PRISM defaults successful."
Shell $(UtilityInf), AddValueList, $(DefaultsKey), $(NetTypeValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(DefaultsKey)
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Debug-Output "Adding defaults based on NetworkType, successful."
Shell $(UtilityInf), AddValueList, $(DefaultsKey), $(PHYTypeValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(DefaultsKey)
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Debug-Output "Adding defaults based on PHYType, successful."
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Debug-Output "Starting writeparameters."
Shell $(UtilityInf), GetBusTypeNum
; set BusTypeNum = $($R1)
; the above was not working so hard coding the bus type to 1 which represents
; NdisInterfaceIsa
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
set BusTypeNum = 1
else
set BusTypeNum = 5 ;PRISM2_PCI
endif
set BusNumber = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
install "Parm-WriteReg"
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NetValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(PRISMValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NetTypeValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(PHYTypeValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
CloseRegKey $(KeyParameters)
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(WLPortKeyName) $(MAXIMUM_ALLOWED) KeyWLPort
Ifstr $(KeyWLPort) != $(KeyNull)
Set KeyNameWlport = "ndcprtns"
DeleteRegTree $(KeyWLPort) $(KeyNameWLport)
endif
CloseRegKey $(KeyWLPort)
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf), RegistryErrorString, "CANNOT_DETECT"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
;Eric:debug
Set InfName = "OEMNANDC.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Else
AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Endif
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Else
AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Endif
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
; set STF_VITAL = ""
; AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
Ifstr(i) $(Option) == "PRISM2_PCMCIA"
AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Else
AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Endif
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;***************************************************************
; Parameter SECTIONS
;***************************************************************
[Parm-ReadReg]
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
; resources
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrItem = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueItem = $(ValueData)
; general - combo
else-ifstr(i) $(ValueName) == "DSChannel"
set PHYParmItem = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkType"
set NetTypeItem = $(ValueData)
else-ifstr(i) $(ValueName) == "TxRate"
set TxRateItem = $(ValueData)
else-ifstr(i) $(ValueName) == "ATIMWindow"
set ATIMWindowItem = $(ValueData)
else-ifstr(i) $(ValueName) == "ListenInterval"
set ListenIntervalItem = $(ValueData)
else-ifstr(i) $(ValueName) == "RTSThresh"
set RTSThreshItem = $(ValueData)
else-ifstr(i) $(ValueName) == "FragThresh"
set FragThreshItem = $(ValueData)
else-ifstr(i) $(ValueName) == "PSMode"
set PSModeItem = $(ValueData)
else-ifstr(i) $(ValueName) == "WepReq"
set WepReqItem = $(ValueData)
else-ifstr(i) $(ValueName) == "AuthentAlg"
set AuthentAlgItem = $(ValueData)
; checkbox
else-ifstr(i) $(ValueName) == "Pcmcia"
set PcmciaValue = $(ValueData)
; edit
else-ifstr(i) $(ValueName) == "SSID"
set SSIDValue = $(ValueData)
endif
EndForListDo
ifint $(PcmciaValue) == 1
set Chk1 = "ON"
else
set Chk1 = "OFF"
endif
set IOBaseAddrUIVal = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrItem)))
ifstr(i) $(IOBaseAddrUIVal) == ""
set IOBaseAddrUIVal = *($(IOBaseAddrList), 1)
endif
set IRQValueUIVal = *($(IRQList), ~($(IRQValues),$(IRQValueItem)))
ifstr(i) $(IRQValueUIVal) == ""
set IRQValueUIVal = *($(IRQList), 6)
endif
set PHYParmUIVal = *($(PHYParmList), ~($(PHYParmValues),$(PHYParmItem)))
ifstr(i) $(PHYParmUIVal) == ""
set PHYParmUIVal = *($(PHYParmList), 1)
endif
set NetTypeUIVal = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeItem)))
ifstr(i) $(NetTypeUIVal) == ""
set NetTypeUIVal = *($(NetTypeList), 1)
endif
set TxRateUIVal = *($(TxRateList), ~($(TxRateValues),$(TxRateItem)))
ifstr(i) $(TxRateUIVal) == ""
set TxRateUIVal = *($(TxRateList), 1)
endif
set ATIMWindowUIVal = *($(ATIMWindowList), ~($(ATIMWindowValues),$(ATIMWindowItem)))
ifstr(i) $(ATIMWindowUIVal) == ""
set ATIMWindowUIVal = *($(ATIMWindowList), 1)
endif
set ListenIntervalUIVal = *($(ListenIntervalList), ~($(ListenIntervalValues),$(ListenIntervalItem)))
ifstr(i) $(ListenIntervalUIVal) == ""
set ListenIntervalUIVal = *($(ListenIntervalList), 6)
endif
set RTSThreshUIVal = *($(RTSThreshList), ~($(RTSThreshValues),$(RTSThreshItem)))
ifstr(i) $(RTSThreshUIVal) == ""
set RTSThreshUIVal = *($(RTSThreshList), 6)
endif
set FragThreshUIVal = *($(FragThreshList), ~($(FragThreshValues),$(FragThreshItem)))
ifstr(i) $(FragThreshUIVal) == ""
set FragThreshUIVal = *($(FragThreshList), 6)
endif
set PSModeUIVal = *($(PSModeList), ~($(PSModeValues),$(PSModeItem)))
ifstr(i) $(PSModeUIVal) == ""
set PSModeUIVal = *($(PSModeList), 1)
endif
set WepReqUIVal = *($(WepReqList), ~($(WepReqValues),$(WepReqItem)))
ifstr(i) $(WepReqUIVal) == ""
set WepReqUIVal = *($(WepReqList), 1)
endif
set AuthentAlgUIVal = *($(AuthentAlgList), ~($(AuthentAlgValues),$(AuthentAlgItem)))
ifstr(i) $(AuthentAlgUIVal) == ""
set AuthentAlgUIVal = *($(AuthentAlgList), 1)
endif
; Save the settings as they were read from the Registry.
exit
[Parm-UI-values]
set IOBaseAddrUIVal = $(Combo1Out)
set IRQValueUIVal = $(Combo2Out)
; set TxRateUIVal = $(Combo3Out)
set PHYParmUIVal = $(Combo4Out)
set NetTypeUIVal = $(Combo5Out)
set RTSThreshUIVal = $(Combo6Out)
; set FragThreshUIVal = $(Combo7Out)
set PSModeUIVal = $(Combo8Out)
set WepReqUIVal = $(Combo9Out)
; set ATIMWindowUIVal = $(Combo10Out)
; set ListenIntervalUIVal = $(Combo11Out)
set AuthentAlgUIVal = $(Combo12Out)
set SSIDValue = *($(EditTextOut),1)
;Always set PcmciaValue = 1 in PRISM2_PCMCIA
; Set Chk = *($(CheckItemsOut), 1)
; Ifstr(i) $(Chk) == "ON"
Set PcmciaValue = 1
set Chk1 = "ON"
; Else
; Set PcmciaValue = 0
; set Chk1 = "OFF"
; Endif
exit
[pcIParm-UI-values]
; set IOBaseAddrUIVal = $(Combo1Out)
; set IRQValueUIVal = $(Combo2Out)
; set TxRateUIVal = $(Combo3Out)
set PHYParmUIVal = $(Combo4Out)
set NetTypeUIVal = $(Combo5Out)
set RTSThreshUIVal = $(Combo6Out)
; set FragThreshUIVal = $(Combo7Out)
set PSModeUIVal = $(Combo8Out)
set WepReqUIVal = $(Combo9Out)
; set ATIMWindowUIVal = $(Combo10Out)
; set ListenIntervalUIVal = $(Combo11Out)
set AuthentAlgUIVal = $(Combo12Out)
set SSIDValue = *($(EditTextOut),1)
Set Chk = *($(CheckItemsOut), 1)
Ifstr(i) $(Chk) == "ON"
Set PcmciaValue = 1
set Chk1 = "ON"
Else
Set PcmciaValue = 0
set Chk1 = "OFF"
Endif
exit
[Parm-WriteReg]
Debug-Output "Starting Parm-WriteReg."
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrUIVal)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueUIVal)))
set PHYParmValue = *($(PHYParmValues), ~($(PHYParmList),$(PHYParmUIVal)))
set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeUIVal)))
set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateUIVal)))
set ATIMWindowValue = *($(ATIMWindowValues), ~($(ATIMWindowList),$(ATIMWindowUIVal)))
set ListenIntervalValue = *($(ListenIntervalValues), ~($(ListenIntervalList),$(ListenIntervalUIVal)))
set RTSThreshValue = *($(RTSThreshValues), ~($(RTSThreshList),$(RTSThreshUIVal)))
set FragThreshValue = *($(FragThreshValues), ~($(FragThreshList),$(FragThreshUIVal)))
set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeUIVal)))
set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqUIVal)))
set AuthentAlgValue = *($(AuthentAlgValues), ~($(AuthentAlgList),$(AuthentAlgUIVal)))
set NetValueList = {+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength, $(NoTitle),$(!REG_VT_DWORD),64},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{Pcmcia, $(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+
{MajorVersion, $(NoTitle),$(!REG_VT_SZ),2},+
{MinorVersion, $(NoTitle),$(!REG_VT_SZ),0},+
}
set PRISMValueList = {+
{SSID, $(NoTitle),$(!REG_VT_SZ), $(SSIDValue)},+
{RTSThresh, $(NoTitle),$(!REG_VT_DWORD),$(RTSThreshValue)},+
{FragThresh, $(NoTitle),$(!REG_VT_DWORD),$(FragThreshValue)},+
{Encapsulation, $(NoTitle),$(!REG_VT_DWORD),$(EthConvValue)},+
{TxRate, $(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+
{WepReq, $(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+
{AuthentAlg, $(NoTitle),$(!REG_VT_DWORD),$(AuthentAlgValue)},+
{ATIMWindow, $(NoTitle),$(!REG_VT_DWORD),$(ATIMWindowValue)},+
{ListenInterval,$(NoTitle),$(!REG_VT_DWORD),$(ListenIntervalValue)},+
{DecryptInDriver,$(NoTitle),$(!REG_VT_DWORD),$(DecryptInDriverValue)},+
{EncryptInDriver,$(NoTitle),$(!REG_VT_DWORD),$(EncryptInDriverValue)},+
{WEPFactor, $(NoTitle),$(!REG_VT_DWORD),$(WEPFactorValue)},+
{IBSSInDriver, $(NoTitle),$(!REG_VT_DWORD),$(IBSSInDriverValue)},+
{PreambleMode, $(NoTitle),$(!REG_VT_DWORD),$(PreambleModeValue)},+
}
set NetTypeValueList = {+
{NetworkType, $(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
{PSMode, $(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+
{PSLevel, $(NoTitle),$(!REG_VT_DWORD),$(PSLevelValue)},+
}
set PHYTypeValueList = {+
{DSChannel, $(NoTitle),$(!REG_VT_DWORD),$(PHYParmValue)},+
}
; Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
exit
;***************************************************************
; Symbol SECTIONS
;***************************************************************
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename)
[Files-PRISM2_PCMCIA]
1, CW10NT.sys, SIZE=12800, RENAME=CW10.sys
1, ndcprtns.sys, SIZE=7000
[Files-PRISM2_PCI]
1, CW10NT.sys, SIZE=12800, RENAME=CW10.sys
1, ndcprtns.sys, SIZE=7000
[pcMFiles-Dll]
1, cw10.dll , SIZE=7168
[pcIFiles-Dll]
1, cw10pci.dll , SIZE=7168
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = $(GenericAdapterName)" Setup"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
pcMDialogDllName = "cw10.dll"
pcIDialogDllName = "cw10pci.dll"
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
DSChanList = ^(DSChanChoices, 1)
DSChanValues = ^(DSChanChoices, 2)
STA_NetTypeList = ^(STA_NetTypeChoices, 1)
STA_NetTypeValues = ^(STA_NetTypeChoices, 2)
STA_TxRateList = ^(STA_TxRateChoices, 1)
STA_TxRateValues = ^(STA_TxRateChoices, 2)
STA_ATIMWindowList = ^(STA_ATIMWindowChoices, 1)
STA_ATIMWindowValues= ^(STA_ATIMWindowChoices, 2)
STA_ListenIntervalList = ^(STA_ListenIntervalChoices, 1)
STA_ListenIntervalValues= ^(STA_ListenIntervalChoices, 2)
RTSThreshList = ^(RTSThreshChoices, 1)
RTSThreshValues = ^(RTSThreshChoices, 2)
FragThreshList = ^(FragThreshChoices, 1)
FragThreshValues = ^(FragThreshChoices, 2)
STA_PSModeList = ^(STA_PSModeChoices, 1)
STA_PSModeValues = ^(STA_PSModeChoices, 2)
WepReqList = ^(WepReqChoices, 1)
WepReqValues = ^(WepReqChoices, 2)
AuthentAlgList = ^(AuthentAlgChoices, 1)
AuthentAlgValues = ^(AuthentAlgChoices, 2)
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
;[MemoryMappedChoicesENG]
; Map_1 = 1, "ON"
; Map_2 = 0, "OFF"
[FileDependentDlgENG]
DlgText = "Please select values for the follwing fields:"
DlgType = "RadioCombination"
DlgTemplate = "CW10"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADE2_INS)
Combo1Label = "I/O Base:"
Combo2Label = "IRQ Level:"
Combo3Label = "Tx Rate:"
Combo4Label = $(PHYParmLabel)
Combo5Label = "Mode:"
Combo6Label = "RTS Threshold:"
Combo7Label = "Fragmentation Threshold"
Combo8Label = "Power Saving:"
Combo9Label = "WEP:"
Combo10Label = "ATIM Window:"
Combo11Label = "Listen Interval:"
Combo12Label = "Authentication Algorithm"
Edit1Label = "SS ID:"
CheckBox1 = "PCMCIA card"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrUIVal)
Combo2List = $(IRQList)
Combo2Out = $(IRQValueUIVal)
Combo3List = $(TxRateList)
Combo3Out = $(TxRateUIVal)
Combo4List = $(PHYParmList)
Combo4Out = $(PHYParmUIVal)
Combo5List = $(NetTypeList)
Combo5Out = $(NetTypeUIVal)
Combo6List = $(RTSThreshList)
Combo6Out = $(RTSThreshUIVal)
Combo7List = $(FragThreshList)
Combo7Out = $(FragThreshUIVal)
Combo8List = $(PSModeList)
Combo8Out = $(PSModeUIVal)
Combo9List = $(WepReqList)
Combo9Out = $(WepReqUIVal)
Combo10List = $(ATIMWindowList)
Combo10Out = $(ATIMWindowUIVal)
Combo11List = $(ListenIntervalList)
Combo11Out = $(ListenIntervalUIVal)
Combo12List = $(AuthentAlgList)
Combo12Out = $(AuthentAlgUIVal)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,+
Combo4List, Combo5List, Combo6List,+
Combo7List, Combo8List, Combo9List,+
Combo10List, Combo11List, Combo12List+
}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,+
Combo4Out, Combo5Out, Combo6Out,+
Combo7Out, Combo8Out, Combo9Out,+
Combo10Out, Combo11Out, Combo12Out+
}
EditTextIn = {$(SSIDValue)}
EditTextLim = {"32"}
CheckItemsIn = {$(Chk1)}
[IOBaseAddrChoices]
IOBase_1 = "4000",16384
IOBase_2 = "5000",20480
IOBase_3 = "6000",24576
IOBase_4 = "7000",28672
IOBase_5 = "8000",32768
IOBase_6 = "9000",36864
IOBase_7 = "A000",40960
IOBase_8 = "B000",45056
IOBase_9 = "C000",49152
IOBase_10 = "D000",53248
IOBase_19 = "180",384
IOBase_11 = "200",512
IOBase_12 = "240",576
IOBase_13 = "280",640
IOBase_14 = "2C0",714
IOBase_15 = "300",768
IOBase_16 = "340",832
IOBase_17 = "380",896
IOBase_18 = "3C0",960
[IRQChoices]
IRQ_3 = "3",3
IRQ_4 = "4",4
IRQ_5 = "5",5
IRQ_7 = "7",7
IRQ_9 = "9",9
IRQ_10 = "10",10
IRQ_11 = "11",11
IRQ_12 = "12",12
IRQ_15 = "15",15
[DSChanChoices]
DSCHAN_1 = "1",1
DSCHAN_2 = "2",2
DSCHAN_3 = "3",3
DSCHAN_4 = "4",4
DSCHAN_5 = "5",5
DSCHAN_6 = "6",6
DSCHAN_7 = "7",7
DSCHAN_8 = "8",8
DSCHAN_9 = "9",9
DSCHAN_10 = "10",10
DSCHAN_11 = "11",11
DSCHAN_12 = "12",12
DSCHAN_13 = "13",13
DSCHAN_14 = "14",14
[STA_NetTypeChoices]
NETTYPE_ADHOC = "Ad Hoc Station",3
NETTYPE_INFRA = "Infrastructure Station",1
NETTYPE_PsIBSS = "802.11 Ad Hoc Station",0
[STA_TxRateChoices]
TXRATE_1 = "1 Mb/s", 1
TXRATE_2 = "2 Mb/s", 2
TXRATE_1_2 = "Auto 1 or 2 Mb/s", 3
TXRATE_55 = "5.5 Mb/s", 4
TXRATE_11 = "11 Mb/s", 8
TXRATE_ALL = "Fully Auto", 15
[STA_ATIMWindowChoices]
ATIMWIN_0 = "Disabled", 0
ATIMWIN_10 = "10 ms", 10
ATIMWIN_20 = "20 ms", 20
ATIMWIN_30 = "30 ms", 30
ATIMWIN_40 = "40 ms", 40
ATIMWIN_50 = "50 ms", 50
ATIMWIN_60 = "60 ms", 60
ATIMWIN_70 = "70 ms", 70
ATIMWIN_80 = "80 ms", 80
ATIMWIN_90 = "90 ms", 90
[STA_ListenIntervalChoices]
LISTENINT_1 = "1 Beacon Per", 1
LISTENINT_2 = "2 Beacon Per", 2
LISTENINT_3 = "3 Beacon Per", 3
LISTENINT_4 = "4 Beacon Per", 4
LISTENINT_5 = "5 Beacon Per", 5
LISTENINT_M = "Maximum", 1
[STA_PSModeChoices]
PS_DIS = "Disabled", 1
PS_EN = "Enabled", 2
[RTSThreshChoices]
RTSTHRESH_256 = "Always", 0
RTSTHRESH_256 = "256 Bytes", 256
RTSTHRESH_512 = "512 Bytes", 512
RTSTHRESH_768 = "768 Bytes", 768
RTSTHRESH_1024 = "1024 Bytes", 1024
RTSTHRESH_1280 = "1280 Bytes", 1280
RTSTHRESH_DIS = "Disabled", 2560
[FragThreshChoices]
FRAGTHRESH_256 = "256 Bytes", 256
FRAGTHRESH_512 = "512 Bytes", 512
FRAGTHRESH_768 = "768 Bytes", 768
FRAGTHRESH_1024 = "1024 Bytes", 1024
FRAGTHRESH_1280 = "1280 Bytes", 1280
FRAGTHRESH_DIS = "Disabled", 2560
[WepReqChoices]
WEP_DIS = "Disabled", 0
WEP_64 = "64 Bit", 2
WEP_128 = "128 Bit", 6
[AuthentAlgChoices]
AUTH_OPEN = "Open System", 1
AUTH_SHARED = "Shared Key", 2
[STA_List]
"PRISM2_PCMCIA"
[DS_List]
"PRISM2_PCMCIA"
[ExCreateRegKey]
Debug-Output "******************Entering [ExCreateRegKey]******************"
set ECR_Result = NO_ERROR
set ECR_BaseKeyHandle = $($0)
set ECR_NewPath = $($1)
set KeyNull = ""
set MAXIMUM_ALLOWED = 33554432
Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
Debug-Output " ECR_NewPath = "$(ECR_NewPath)
Debug-Output " MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
Debug-Output " KeyNull = "$(KeyNull)
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
ECR_BaseKey
Debug-Output "ECR_BaseKey = "$(ECR_BaseKey)
Debug-Output " OpenRegKey returned "$($R0)
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "ECR_BaseKey == KeyNull"
Else
Debug-Output "ECR_BaseKey != KeyNull"
set ECR_KeyHandle = $(ECR_BaseKey)
goto ECR_Return
Endif
set ECR_TmpPath = ""
Split-String $(ECR_NewPath) "\" ECR_PList
Debug-Output "ECR_PList = "$(ECR_PList)
ForListDo $(ECR_PList)
Ifstr(i) $($) != "\"
Ifint $(#) == 1
set ECR_TmpPath = $($)
Else
set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
Endif
Debug-Output "Determining if "$(ECR_TmpPath)" exists"
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "Creating "$(ECR_TmpPath)
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
Ifstr(i) $(ECR_KeyHandle) == $(KeyNull)
set ECR_Result = $($R0)
goto ECR_Return
Endif
Endif
Endif
EndForListDo
ECR_Return = +
return $(ECR_Result) $(ECR_KeyHandle)
;***************************************************************
; Default SECTIONS
;***************************************************************
[Read-Defaults]
; set the default values
; I/O Base Address = 0x240
set IOBaseAddrUIVal = "240"
; IRQ Level = 9
set IRQValueUIVal = "9"
; PcmciaValue = 0/1
set PcmciaValue = 1
set Chk1 = "ON"
; Ethernet conversion mode = "Encapsulated"/"RFC1042"/"802.1h"
; set EthConvValue = "802.1h"
set EthConvValue = 1
; Station Mode related default values
set PSLevelValue = 0;
; Power Save Mode = "Disabled"/"Basic"/"Enhanced"
set PSModeList = $(STA_PSModeList)
set PSModeValues = $(STA_PSModeValues)
set PSModeUIVal = "Disabled"
; configure as infrastructure station
set NetTypeList = $(STA_NetTypeList)
set NetTypeValues = $(STA_NetTypeValues)
set NetTypeUIVal = "Infrastructure Station"
; configure for 11 Mb/s default
set TxRateList = $(STA_TxRateList)
set TxRateValues = $(STA_TxRateValues)
set TxRateUIVal = "Fully Auto"
; configure for ATIM Window Disabled
set ATIMWindowList = $(STA_ATIMWindowList)
set ATIMWindowValues = $(STA_ATIMWindowValues)
set ATIMWindowUIVal = "Disabled"
; configure for Listen interval at MAX
set ListenIntervalList = $(STA_ListenIntervalList)
set ListenIntervalValues = $(STA_ListenIntervalValues)
set ListenIntervalUIVal = "Maximum"
; configure for RTS/CTS disabled
set RTSThreshList = $(RTSThreshList)
set RTSThreshValues = $(RTSThreshValues)
set RTSThreshUIVal = "Disabled"
; configure for Fragmentation disabled
set FragThreshList = $(FragThreshList)
set FragThreshValues = $(FragThreshValues)
set FragThreshUIVal = "Disabled"
; configure for WEP Disabled
set WepReqList = $(WepReqList)
set WepReqValues = $(WepReqValues)
set WepReqUIVal = "Disabled"
; configure for Authentication algorithm using Shared
set AuthentAlgList = $(AuthentAlgList)
set AuthentAlgValues = $(AuthentAlgValues)
set AuthentAlgUIVal = "Shared Key"
; PHY parameters DS
set PHYParmName = "DSChannel";
set PHYParmList = $(DSChanList)
set PHYParmValues = $(DSChanValues)
set PHYParmUIVal = "3"
set PHYParmLabel = "DS Channel:"
; Decryption to be done in Driver flag
set DecryptInDriverValue = 1;
; Encryption to be done in Driver flag
set EncryptInDriverValue = 1;
; WEP Factor value
set WEPFactorValue = 3;
; IBSS to be managed by Driver flag
set IBSSInDriverValue = 1;
; Set Preamble mode to Long=1
set PreambleModeValue = 1;
; default SSID - to be customized by OEM customer
set SSIDValue = "ANY"
exit
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.