OEMSETUP.INF Driver File Contents (WLV1.29C.ZIP)

;***********************************************************************
;
; OEMSETUP.INF  
;       
;       The INF file is used to install 11Mbits Wireless LAN adapter  
;
;   	Supported OS: 
;				
;					Windows NT 4.0
;
;		Supported adapters:
;
;       			11M DS Wireless LAN PCMCIA/PCI Adapter
;
;       Version 0.294
;
;***********************************************************************

;***********************************************************************
; 1. Identify
;
; DESCRIPTION:  To verify that this INF deals with the same type of options
;                               as we are choosing currently.
;
; INPUT:                None
;
; OUTPUT:               $($R0): STATUS: STATUS_SUCCESSFUL
;                               $($R1): Option Type (COMPUTER ...)
;                               $($R2): Diskette description
;***********************************************************************
;
;
;---------------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,           a netcard / adapter combination or just a netcard
; NetDriver,            just a netcard driver
; NetTransport,         a complete NDIS-compliant TDI transport stack
; NetService,           an NT networking service
; NetWork,                      a complete network ensemble.
; NetProvider           a complete network which supports NT MPR protocol
;---------------------------------------------------------------------------

[Identify]
        set Status              = STATUS_SUCCESSFUL
        set Identifier  		= NetAdapter
        set Media               = #("Source Media Descriptions", 1, 1)

        Return $(Status) $(Identifier) $(Media)


;***********************************************************************
;
;       End Indentify
;
;***********************************************************************



;***********************************************************************
; 2. ReturnOptions:
;
; DESCRIPTION:  To return the option list supported by this INF and the
;                               localised text list representing the options.
;
;
; INPUT:                $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:               $($R0): STATUS: STATUS_SUCCESSFUL |
;                                                               STATUS_NOLANGUAGE
;                                                               STATUS_FAILED
;                                                               STATUS_NOTSUPPORTED
;
;                               $($R1): Option List
;                               $($R2): Option Text List
;***********************************************************************

[ReturnOptions]
        ;
        ;
        set Status              = STATUS_FAILED
        set OptionList          = {}
        set OptionTextList      = {}

        ;
        ; Check if the language requested is supported
        ;
        set LanguageList = ^(LanguagesSupported, 1)
        Ifcontains(i) $($0) in $(LanguageList)
                ;
                ; Check if the platforms requested is supported
                ;
                ifstr(i) $($1) == ""
                        goto returnoptions
                endif

                set PlatformList = ^(PlatformsSupported, 1)
                Ifcontains(i) $($1) in $(PlatformList)
                        goto returnoptions
                else
                        set Status = STATUS_NOTSUPPORTED
                        goto finish_ReturnOptions
                endif
        else
                set Status = STATUS_NOLANGUAGE
                goto finish_ReturnOptions
        endif

        ;
        ; form a list of all the options and another of the text representing
        ;
returnoptions = +
        set OptionList          = ^(Options, 1)
        set OptionTextList      = ^(OptionsText$($0), 1)
        set Status                      = STATUS_SUCCESSFUL

finish_ReturnOptions = +
        Return $(Status) $(OptionList) $(OptionTextList)



;=======================================================================
;
;       ReturnOptions related symbols
;
;=======================================================================

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA and PCMCIA
;-----------------------------------------------------------------------

[PlatformsSupported]
        ISA
        PCMCIA
        PCI

;-----------------------------------------------------------------------
;
;       Languages Supported in INF File
; Possible types are:
;
; ENG, FRN, SPN, ...
;-----------------------------------------------------------------------
[LanguagesSupported]
        ENG

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
        PRISM2_PCMCIA
        PRISM2_PCI

[OptionsTextENG]
      PRISM2_PCMCIA  ="Conceptronic 11C PC Card"
       PRISM2_PCI	          ="Conceptronic 11I PCI Adapter"

;***********************************************************************
;
;       End ReturnOptions
;
;***********************************************************************


;***********************************************************************
; 4. Source Media Descriptions:
;
; DESCRIPTION:  A detect section required in all oemsetup.inf files. It
;                               consists of a lied for each floppy disk that is part of
;                               the distribution set. The format is as follows:
;
;                               LineKey = [DiskDescription, TAGFILE = TagFileName]
;
; EXAMPLE:              1 = "Driver Disk #1", TAGFILE = disk1
;
;
; INPUT:                None
;
; OUTPUT:               None
;
;***********************************************************************

[Source Media Descriptions]
        1  = "Conceptronic 11C/11I drivers"


;***********************************************************************
;
;       End Source Media Descriptions
;
;***********************************************************************




;***********************************************************************
;
; InstallOption:
;
;               This section is shelled to by main installation processing
;               or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:     To copy files representing Options
;                       To configure the installed option
;                       To update the registry for the installed option
;
; INPUT:        $($0):  Language to use
;                       $($1):  OptionID to install
;                       $($2):  SourceDirectory
;                       $($3):  AddCopy  (YES | NO)
;                       $($4):  DoCopy  (YES | NO)
;                       $($5):  DoConfig (YES | NO)
;
; OUTPUT:       $($R0): STATUS: STATUS_SUCCESSFUL |
;                                                       STATUS_NOLANGUAGE |
;                                                       STATUS_USERCANCEL |
;                                                       STATUS_FAILED
;
;***********************************************************************


;------------------------------------------------------------------------
; CONSTANTS FOR USING DIALOGS
;------------------------------------------------------------------------
[IntersilPrism2FileConstants]
        GenericAdapterName      = "Conceptronic 11C PC Card"

[IntersilPrism2pcIFileConstants]
        GenericAdapterName      = "Conceptronic 11I PCI Adapter"

[FileConstants]
        GenericDriverName       = "Conceptronic 11C/11I Adapter driver"
        GenericSysName          = "cw10.sys"
        GenericName             = "CW10"

        ;
        ;  File names, etc.
        ;
        UtilityInf              = "UTILITY.INF"
        ParamInf                = "NCPARAM.INF"
        subroutineinf           = "SUBROUTN.INF"
        SoftwareType            = "driver"
        Exit_Code               = 0

        ;
        ; EventLog Message File
        ;
        NetEventDLL             = "%SystemRoot%\System32\netevent.dll"
        IoLogMsgDLL             = "%SystemRoot%\System32\IoLogMsg.dll"

        ;
        ; Product Info
        ;
        Manufacturer            = "2L"
        ProductMajorVersion     = "0"
        ProductMinorVersion     = "3"
        ProductVersion          = $(ProductMajorVersion)"."$(ProductMinorVersion)

        ;
        ; Software
        ;
        ProductSoftwareName             = "CW10"
        ProductSoftwareImagePath        = "\SystemRoot\System32\drivers\"$(GenericSysName)
        NetRuleSoftwareType             = "cw10Sys ndisDriver cw10Driver"

        NetRuleSoftwareUse              = $(SoftwareType)
        NetRuleSoftwareBindForm         = """cw10Sys"" yes no container"

        NetRuleSoftwareClass            = {"cw10Driver basic"}
        NetRuleSoftwareBindable         = {"cw10Driver cw10Adapter non exclusive 100"}
        ;
        ; Hardware
        ;
        ProductHardwareName             = "CW10"
        NetRuleHardwareType             = "cw10 cw10Adapter"
        NetRuleHardwareBindForm         = " yes yes container"
        NetRuleHardwareClass            = {"cw10Adapter basic"}

        ;
        ; Registry Key
        ;
        ProductKeyName                  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
        ParamKeyName                    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
        PcmciaDataBaseKeyName           = $(!NTN_ServiceBase)"\Pcmcia\Database"

        WLPortKeyName = "System\CurrentControlSet\Services\ndcprtns"
        KeyWLPort = ""
        Start_Manual = 3
        Type_Sys = 1
		VendorID = 5688
		PRISM2_PCICFID = 285218360
[GeneralConstants]
        ;
        ;  Program flow control variables.
        ;
        from            = ""
        to              = ""
        ;
        ;  Return codes; Exit_Code is set to one of these
        ;
        ExitCodeOk      = 0
        ExitCodeCancel  = 1
        ExitCodeFatal   = 2

        KeyNull                 = ""
        MAXIMUM_ALLOWED         = 33554432
        RegistryErrorIndex      = NO_ERROR
        KeyProduct              = ""
        KeyParameters           = ""

        TRUE    = 1
        FALSE   = 0
        NoTitle = 0

        ExitState               = "Active"
        OldVersionExisted       = $(FALSE)

        DriverPath      = $(!STF_NTPATH)\drivers

[date]
        ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
        ; Minute, Second }
        Now     = {} ? $(!LIBHANDLE) GetSystemDate


;------------------------------------------------------------------------
;
; InstallOption:
;
;               This section is shelled to by main installation processing
;               or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;                       To configure the installed option
;                       To update the registry for the installed option
;
; INPUT:        $($0):  Language to use
;                       $($1):  OptionID to install
;                       $($2):  SourceDirectory
;                       $($3):  AddCopy  (YES | NO)
;                       $($4):  DoCopy  (YES | NO)
;                       $($5):  DoConfig (YES | NO)
;
; OUTPUT:       $($R0): STATUS: STATUS_SUCCESSFUL |
;                                                       STATUS_NOLANGUAGE |
;                                                       STATUS_USERCANCEL |
;                                                       STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
        ;
        ; Set default values for
        ;
        set Status      = STATUS_FAILED
        ;
        ; extract parameters
        ;
        set Option      = $($1)
        set SrcDir      = $($2)
        set AddCopy     = $($3)
        set DoCopy      = $($4)
        set DoConfig    = $($5)

        ; Enable debugging output
        Set !G:DebugOutputControl = 1

        ;
        ; Check if the language requested is supported
        ;
        set LanguageList = ^(LanguagesSupported, 1)
        Ifcontains(i) $($0) NOT-IN $(LanguageList)
                Return STATUS_NOLANGUAGE
        endif

        read-syms GeneralConstants

        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
                read-syms IntersilPrism2FileConstants
		else    ;PRISM2_PCI
		        read-syms IntersilPrism2pcIFileConstants
        endif


        read-syms FileConstants

        read-syms DialogConstants$(!STF_LANGUAGE)
        ifstr(i) $(!NTN_Origination) == "NCPA"
                set Continue = $(OK)
        endif
        read-syms FileConstants$(!STF_LANGUAGE)

        detect date

        set-title  $(FunctionTitle)

        set to          = Begin
        set from        = Begin
        ;
        ;  Assume all is well.
        ;
        set CommonStatus = STATUS_SUCCESSFUL

        EndWait

        ;
        ;       Set up the operation-mode-based variables and gaily welcome
        ;       the user.  If the "install mode" variable is improperly set,
        ;       assume this is a new installation.
        ;

Begin = +
        Set ActivateDetection = FALSE

        Ifstr(i) $(!NTN_InstallMode) == deinstall
                set StartLabel = removeadapter
        else-Ifstr(i) $(!NTN_InstallMode) == Update
                set StartLabel = UpgradeSoftware
        else-Ifstr(i) $(!NTN_InstallMode) == bind
                set StartLabel = bindingadapter
        else-Ifstr(i) $(!NTN_InstallMode) == configure
;               set ActivateDetection = TRUE
                set StartLabel = configureadapter
                ;
                ;       You cannot config the software component
                ;
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure the PRISM II driver."
                        Shell $(UtilityInf), RegistryErrorString, "CANNOT_CONFIGURE_SOFTWARE"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error       = $($R0)
                        set from        = end
                        set to          = end
                        goto nonfatalinfo
                endif
        else
;               set ActivateDetection           = TRUE
                set StartLabel                  = installadapter
                set OEM_ABANDON_OPTIONS         = {}
                set OEM_ABANDON_SOFTWARE        = FALSE
                set OEM_ABANDON_ON              = TRUE
        endif

        install "Read-Defaults"
        install "Parm-WriteReg"

        Set from        = $(fatal)
        Set to          = $(fatal)
        Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +

	Ifstr(i) $(Option) == "PRISM2_PCI"

		;
        ; Check the ID for PCI adapter
        ;
		set-div DeviceID = $($(Option)CFID) 65536
	    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
				goto ShellCodeError
	    endif
	    ifstr(i) $($R0) == {}
			set Error = $(CANNOT_FIND_ANY_CARD)
;			set CommonStatus = STATUS_USERCANCEL
			set from = end
			set to   = end
			goto nonfatalinfo
		endif	

	Else		 ;PRISM2_PCMCIA
		;
        ; Create/recreate the Registry's PCMCIA database entry for the CW10 adapter
        ;
        Debug-Output "*** installadapter ***"
        Debug-Output "PcmciaDataBaseKeyName = "$(PcmciaDataBaseKeyName)


        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
          set ManKeyName = "OEM\PRISM2 IEEE 802.11 PC-Card";
        endif

        Debug-Output "ManKeyName = "$(ManKeyName)

        set KeyPcmciaDataBase = ""
        OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase
        Shell "" ExCreateRegKey $(KeyPcmciaDataBase) $(ManKeyName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                CloseRegKey $(KeyPcmciaDataBase)
                goto ShellCodeError
        endif

        OpenRegKey $(KeyPcmciaDataBase) "" $(ManKeyName) $(MAXIMUM_ALLOWED) KeyTemp
        SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)}
        CloseRegKey $(KeyTemp)
        OpenRegKey $(KeyPcmciaDataBase) "" $(ManKeyName) $(MAXIMUM_ALLOWED) KeyTemp
        SetRegValue $(KeyTemp) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}
        CloseRegKey $(KeyTemp)

        CloseRegKey $(KeyPcmciaDataBase)

        Debug-Output "Driver Value set in ManKey"

	Endif	;endif PRISM2_PCMCIA
	
        ;
        ; Check whether the same version of the software exists
        ;

        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

        Ifstr $(KeyProduct) != $(KeyNull)
                ;
                ; Same version already existed in the local machine
                ; Popup the dialog and ask the user whether he wants to continue
                ;
                Debug-Output "ProductKeyName already exists = "$(ProductKeyName)
                CloseRegKey $(KeyProduct)

                ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
                        Debug-Output "Cannot Install the same software again"

                        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
                                $(ProductVersion)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif

                        goto end
                else
                        Debug-Output "Add a new adapter card?"

                        Shell $(UtilityInf), CardExistedDlg

                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif

                        ifstr(i) $($R1) != "OK"
                                goto end
                        endif
                        set OldVersionExisted = $(TRUE)
                endif
        endif
	
        OpenRegKey $(!REG_H_LOCAL) "" $(WLPortKeyName) $(MAXIMUM_ALLOWED) KeyWLPort
        Ifstr $(KeyWLPort) == $(KeyNull)
                CreateRegKey $(!REG_H_LOCAL) {$(WLPortKeyName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyWLPort
                set NewValueList = {{ErrorControl,$(NoTitle),$(!REG_VT_DWORD),$(ErrorControl_Default)},+
                        {Start,$(NoTitle),$(!REG_VT_DWORD),$(Start_Manual)},+
                        {Type,$(NoTitle),$(!REG_VT_DWORD),$(Type_Sys)},+
                        {Group,$(NoTitle),$(!REG_VT_SZ),$(Group_Default)}}

                Shell  $(UtilityInf), AddValueList, $(KeyWLPort), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error."
                        goto ShellCodeError
                endif
        endif
        CloseRegKey $(KeyWLPort)

;
;  dll load addition
;
        Debug-Output "Calling DoAskSource."

        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO

        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
                Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error: cannot get an error string."
                        goto ShellCodeError
                endif
                set Error = $($R0)
                Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                Goto successful
        Endif
        Set SrcDir = $($R1)

        Debug-Output "Done DoAskSource, calling Install-Dll."
;
;       Run Dll for updating parameters
;
        install "Install-Dll"

        Debug-Output "Done Install-Dll, going to adaptersetup."

;       We want to show Advance properties during install.
        goto adaptersetup
        goto skipoptions

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;       Get the current values of all the parameters
;
configureadapter = +

        Debug-Output "Starting configureadapter."

        Ifstr $(KeyProduct) == $(KeyNull)
                OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
                Ifstr $(KeyProduct) == $(KeyNull)
                        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
                        Debug-Output "Cannot find component product key"
                        goto fatalregistry
                Endif
        Endif

        ;
        ; Get the other parameters;  they're attached to the service parameters key
        ;
        Debug-Output "INF: Shelling to FindService"
        Shell $(UtilityInf) FindService, $(KeyProduct)
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "INF: FindService shell failure"
                Goto ShellCodeError
        Endif
        Ifstr(i) $($R0) != NO_ERROR
                Debug-Output "INF: FindService Shell error: "$($R0)
                Goto fatalregistry
        endif

        Set KeyParameters = $($R2)

        ;
        ;  We don't need the services key, so close it.
        ;
        CloseRegKey $($R1)

        Ifstr $(KeyParameters) == $(KeyNull)
                set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
                Debug-Output "Cannot find component service"
                goto fatalregistry
        endif

        set OldVersionExisted = $(TRUE)

        install "Parm-ReadReg"


;       Shell $(ParamInf) Param_SaveValues
;       Set CurrParamSettings = $($R0)
;
;       Put up the adapter configuration dialog if necessary.
;
;       Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +

;       Shell "" DebugConfiguration "before displaying dialog"

        Debug-Output "Starting adaptersetup"

        Set from = adapteroptions


adapteroptions = +

        Debug-Output "Starting adapteroptions"

	Ifstr(i) $(Option) == "PRISM2_PCMCIA"
	    LoadLibrary "Disk 1" $(!STF_WINDOWSSYSPATH)\$(pcMDialogDllName) hLib
        read-syms FileDependentDlg$(!STF_LANGUAGE)

        ui start "InputDlg"  $(hLib)

        set ExitButton  = $(ButtonPressed)

        Debug-Output " ButtonPressed "$(ButtonPressed)

        FreeLibrary $(hLib)

        ifstr(i) $(DLGEVENT) == "CONTINUE"
                Debug-Output "Action: Continue"

                install "Parm-UI-values"
                set ExitButton                  = $(ButtonPressed)

                ui pop 1
;               goto nextstep
        else-ifstr(i) $(DLGEVENT) == "EXIT"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
        else
                ;
                ; Unknow command
                ;
                ui pop 1

                Debug-Output "Action: unknown. Bye."
                goto end
        endif

        Debug-Output " Combo list out "$(ComboListItemsOut)
	Else ;PRISM2_PCI
		LoadLibrary "Disk 1" $(!STF_WINDOWSSYSPATH)\$(pcIDialogDllName) hLib
        read-syms FileDependentDlg$(!STF_LANGUAGE)

        ui start "InputDlg"  $(hLib)

        set ExitButton  = $(ButtonPressed)

        Debug-Output " ButtonPressed "$(ButtonPressed)

        FreeLibrary $(hLib)

        ifstr(i) $(DLGEVENT) == "CONTINUE"
                Debug-Output "Action: Continue"

                install "pcIParm-UI-values"
                set ExitButton                  = $(ButtonPressed)

                ui pop 1
;               goto nextstep
        else-ifstr(i) $(DLGEVENT) == "EXIT"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
        else
                ;
                ; Unknow command
                ;
                ui pop 1

                Debug-Output "Action: unknown. Bye."
                goto end
        endif

        Debug-Output " Combo list out "$(ComboListItemsOut)
	Endif ;endif PRISM2_PCI

;
;       If installing, go create the necessary keys;
;       if configuring, they're already open.
;
skipoptions =+

        Debug-Output "Starting skipoptions."

        ifint $(OldVersionExisted) == $(TRUE)
                Debug-Output "Older version existed."

                ifstr(i) $(!NTN_InstallMode) == configure
                        goto writeparameters
                endif
        endif
        StartWait
        ;
        ; Add Software Component
        ;
        ifint $(OldVersionExisted) == $(FALSE)

                Debug-Output "No older version."

                ifstr(i) $(!NTN_InstallMode) == "install"
                        Ifstr(i) $(DoCopy) == "YES"

                                Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

                                Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                        Goto ShellCodeError
                                Else-Ifstr(i) $($R0) == STATUS_FAILED
                                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                                goto ShellCodeError
                                        endif
                                        set Error = $($R0)
                                        Goto fatal
                                Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                                        Goto successful
                                Endif

                                Set SrcDir = $($R1)

                        Endif

                        install "Install-Option"
                        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                                Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                        goto ShellCodeError
                                endif
                                set Error = $($R0)
                                goto fatal
                        endif
                endif



                Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)

                Set OEM_ABANDON_SOFTWARE = TRUE

                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error"
                        goto ShellCodeError
                endif
                ;
                ;       At this point:
                ;               $R1 contains the product version key handle;
                ;               $R2 contains the NetRules subkey handle;
                ;               $R3 contains the new Services key handle; and
                ;               $R4 contains the Parameters key
                ;               $R5 contains the Linkage Key
                ;
                set RegistryErrorIndex  = $($R0)
                set KeyProduct                  = $($R1)
                Set SoftNetRulesKey             = $($R2)
                CloseRegKey $($R3)
                CloseRegKey $($R4)
                CloseRegKey $($R5)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        EndWait
                        Debug-Output "Registry error: add software components"
                        CloseRegKey $(KeyProduct)
                        CloseRegKey $(SoftNetRulesKey)
                        goto fatalregistry
                endif

                set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                                        {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                                        {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                                        {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

                Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error."
                        goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        EndWait
                        Debug-Output "Registry error: add value list."
                        CloseRegKey $(KeyProduct)
                        CloseRegKey $(SoftNetRulesKey)
                        goto fatalregistry
                endif

                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

                Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error."
                        goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                CloseRegKey $(KeyProduct)
                CloseRegKey $(SoftNetRulesKey)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        EndWait
                        Debug-Output "Resgitry error: add value list."
                        goto fatalregistry
                endif
        endif
;
;       Create the HARDWARE\Netcard region and its corresponding service
;
        Debug-Output "Calling AddHardwareComponent."

        Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

        ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
        endif

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
        endif

;
;       At this point:
;               $R1  Registry key variable for HARDWARE\Netcard\(n)
;               $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;               $R3  Registry key handle for <service>\Parameters key
;               $R4  Adapter number assigned to adapter
;               $R5  Service name generated by combining svc name with adapter number
;
        set KeyParameters               = $($R3)
        set KeyAdapterRules             = $($R2)
        set AdapterNumber               = $($R4)

        set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
                                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
        endif

        CloseRegKey $($R1)

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
        endif

        CloseRegKey $(KeyAdapterRules)

        ;
        ;       Only create Defaults key when installing driver
        ;       Write defaults to registry before updating values in lists
        ;
        Debug-Output "Starting Install-Defaults."

        CreateRegKey $(KeyParameters) {"defaults",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" DefaultsKey
        Ifstr(i) $(DefaultsKey) == $(KeyNull)
                Debug-Output "Registry error: Create defaults subkey"
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        Endif

        Debug-Output "CreateKey successful."

        Shell  $(UtilityInf), AddValueList, $(DefaultsKey), $(PRISMValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(DefaultsKey)
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Debug-Output "Adding PRISM defaults successful."

        Shell  $(UtilityInf), AddValueList, $(DefaultsKey), $(NetTypeValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(DefaultsKey)
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Debug-Output "Adding defaults based on NetworkType, successful."

        Shell  $(UtilityInf), AddValueList, $(DefaultsKey), $(PHYTypeValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(DefaultsKey)
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Debug-Output "Adding defaults based on PHYType, successful."

        goto writeparameters

;
;       REQUIRED:       $(KeyParameters) contains service Parameters key handle
;
writeparameters = +

        Debug-Output "Starting writeparameters."

        Shell $(UtilityInf), GetBusTypeNum

;       set BusTypeNum = $($R1)
; the above was not working so hard coding the bus type to 1 which represents
;                       NdisInterfaceIsa
        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
	        set BusTypeNum          = 1
	    else
	        set BusTypeNum          = 5 ;PRISM2_PCI
	    endif
        set BusNumber           = 0
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

;
;       Add the rest of the parameters to the Services area
;

        install "Parm-WriteReg"

        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NetValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(PRISMValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NetTypeValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(PHYTypeValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                CloseRegKey $(KeyParameters)
                goto fatalregistry
        endif

        CloseRegKey $(KeyParameters)

        EndWait

        goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
        set Error = "Binding: Sorry, not yet implemented."
        goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                ; Remove Software Component
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error"
                        goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        goto fatalregistry
                endif
                else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error"
                        goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        goto fatalregistry
                endif
        endif

        OpenRegKey $(!REG_H_LOCAL) "" $(WLPortKeyName) $(MAXIMUM_ALLOWED) KeyWLPort
        Ifstr $(KeyWLPort) != $(KeyNull)
                Set KeyNameWlport = "ndcprtns"
                DeleteRegTree $(KeyWLPort) $(KeyNameWLport)
        endif
        CloseRegKey $(KeyWLPort)
        goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
        ;
        ; First determine whether we want to do upgrade or update for software
        ; or hardware component. Then we will determine whether the Mode is
        ; update or upgrade.
        ;
        ; If the same version of the product existed in the registry, we do
        ; update. Otherwise, we will do a upgrade
        ;
        ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                ; Upgrade software component
                ;
                ; see whether the same version exist or not
                ;
                OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

                Ifstr $(KeyProduct) != $(KeyNull)
                        GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
                        set Version = *($(VersionInfo), 4)

                        ;
                        ; Update the binaries
                        ;
                        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)

                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                        endif

                        set !UG_Filename = $($R0)

                        ifstr(i) $(!UG_Filename) != ""
                                install "Install-Update"
                                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                                        goto fatal
                                endif
                        endif

                        ; Upgrade the version number
                        ;
                        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
                        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

                        ;
                        ; do nothing for update
                        ;
                        ifint $(Version) != $(ProductVersion)
                                ;
                                ; If the major version number is not the same,
                                ; it is major upgrade. So let Upgrade the product
                                ;
                                ;
                                ; make other upgrade change if necessary
                                ;
                        endif
                        CloseRegKey $(KeyProduct)
                else
                        ;
                        ; Cannot Open software key, goto ERROR
                        ;
                        goto fatalregistry
                endif
        else
                ;
                ; upgrade/update hardware component
                ; There is no different between upgrade and update for hardware
                ; component
                ;
                ; 1. Get the Service Name
                ; 2. Change the NetRule section if necessary
                ;
                OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
                                $(MAXIMUM_ALLOWED) NetworkCardKey
                Ifstr(i) $(NetworkCardKey) != $(KeyNull)
                        ;
                        ; Get Service name
                        ;
                        GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
                        set ServiceName = *($(ServiceNameInfo), 4)

                        ;
                        ; Change the NetRule if necessary
                        ;
                        OpenRegKey $(NetworkCardKey) "" "NetRules" +
                        $(MAXIMUM_ALLOWED) NetRuleKey
                        Ifstr(i) $(NetRuleKey) != $(KeyNull)
                                ;
                                ; Make the change....
                                ;
                        else
                                ;
                                ; Error, cannot open net rules key
                                ;
                                goto fatalregistry
                        endif

                        CloseRegKey $(NetRules)
                        CloseRegKey $(NetworkCardKey)
                else
                        ;
                        ; Error, cannot open network card key
                        ;
                        goto fatalregistry
                endif
                ;
                ; 3. Change the service section of the hardware. i.e.,
                ;       ParameterName change, value change, etc.
                ;
                OpenRegKey $(!REG_H_LOCAL) "" +
                                $(!NTN_ServiceBase)"\"$(ServiceName) +
                                $(MAXIMUM_ALLOWED) ServiceKey

                Ifstr(i) $(ServiceKey) != $(KeyNull)
                        ;
                        ; Get the ServiceKey to change the Start value
                        ; or Type value. Or open Parameters key to
                        ; change the hardware parameters if necessary.
                        ;
                        CloseRegKey $(ServiceKey)
                else
                        ;
                        ; Error, cannot open network card key
                        ;
                        goto fatalregistry
                endif
        endif

        goto end
        ;
        ; End of Upgrade Software
        ;

;
;  Escape hatches
;
successful = +
        goto end

abandon = +
        ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                goto fatalregistry
        endif
        EndForListDo

        Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
                ; Remove Software Component
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), FALSE
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "ShellCode error"
                        goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                        goto fatalregistry
                endif
        endif

        goto end

;
; warning display
;
warning = +
        Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
        endif
        ifstr(i) $($R1) == "OK"
                goto $(to)
        else-ifstr(i) $($R1) == "CANCEL"
                goto $(from)
        else
                goto "end"
        endif
;
; non fatal error display
;
nonfatalinfo = +
        Set Severity = STATUS
        Set CommonStatus = STATUS_USERCANCEL
        goto nonfatalmsg
nonfatal = +
        Set Severity = NONFATAL
        goto nonfatalmsg
nonfatalmsg = +
        ifstr(i) $(Error) == ""
                Set Severity = NONFATAL
                Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                endif
                set Error = $($R0)
        endif
        Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
        endif
        ifstr(i) $($R1) == "OK"
                goto $(from)
        else
                goto "end"
        endif

;
;  Registry is broken
;
fatalregistry = +
        Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
        endif
        set Error = $($R0)
        goto fatal
;
;  Netcard detection failure
;
fataldetect = +
        Shell $(UtilityInf), RegistryErrorString, "CANNOT_DETECT"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
        endif
        set Error = $($R0)
        Goto fatal
;
; fatal error display
;
fatal = +
        ifstr(i) $(Error) == ""
                Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                endif
                set Error = $($R0)
        endif
        Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
        endif

        goto setfailed

;
;  Shelling error
;
ShellCodeError = +
        set DlgType             = "MessageBox"
        set STF_MB_TITLE        = $(ShellCodeErrorTitle)
        set STF_MB_TEXT         = $(ShellCodeErrorText)
        set STF_MB_TYPE         = 1
        set STF_MB_ICON         = 3
        set STF_MB_DEF          = 1
        ui start "Error Message"
        goto setfailed

setfailed = +
        set CommonStatus = STATUS_FAILED
        ;
        ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
        ;
        ifstr(i) $(OEM_ABANDON_ON) == TRUE
                set OEM_ABANDON_ON = FALSE
                goto abandon
        endif
        goto end

end = +
        goto term

term = +

        Return $(CommonStatus)

[DebugConfiguration]
       ;Eric:debug
        Set InfName = "OEMNANDC.INF"
        Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
        Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
        Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
        Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
        Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)

        return


;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
        set STF_VITAL = ""

        ifstr(i) $(AddCopy) == "YES"

                ;
                ; Add the files to the copy list
                ;
                ;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
                ;               the other INF files

                AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
		        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
	                AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
				Else
					AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
				Endif
        endif

        ifstr(i) $(DoCopy) == "YES"

                ;
                ; Copy files in the copy list

                 set !STF_NCPA_FLUSH_COPYLIST = TRUE
                 CopyFilesInCopyList

        endif

        Exit

[Install-Update]
        set STF_VITAL           = ""
        set STF_OVERWRITE       = "VERIFYSOURCEOLDER"
        ;set STF_VERSION                = "YES"

        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
	        AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
		Else
			AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
		Endif
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList

        exit

[Install-Dll]
;       set STF_VITAL           = ""
;       AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
;       set !STF_NCPA_FLUSH_COPYLIST = TRUE
;       CopyFilesInCopyList
        Ifstr(i) $(Option) == "PRISM2_PCMCIA"
		    AddSectionFilesToCopyList pcMFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
		Else
		    AddSectionFilesToCopyList pcIFiles-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
		Endif
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
        exit

;***************************************************************
;  Parameter SECTIONS
;***************************************************************

[Parm-ReadReg]
        set ValueName   = ""
        set ValueData   = ""
        set ValueStr    = ""
        set ValueList   = {}
        ;
        ; Get the old values
        ;
        EnumRegValue $(KeyParameters) ValueList

        ForListDo $(ValueList)
                set ValueItem   = $($)
                set ValueName   = *($(ValueItem),1)
                set ValueData   = *($(ValueItem),4)

  ; resources
                ifstr(i) $(ValueName) == "IoBaseAddress"
                        set IOBaseAddrItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "InterruptNumber"
                        set IRQValueItem = $(ValueData)
  ; general - combo
                else-ifstr(i) $(ValueName) == "DSChannel"
                        set PHYParmItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "NetworkType"
                        set NetTypeItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "TxRate"
                        set TxRateItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "ATIMWindow"
                        set ATIMWindowItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "ListenInterval"
                        set ListenIntervalItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "RTSThresh"
                        set RTSThreshItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "FragThresh"
                        set FragThreshItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "PSMode"
                        set PSModeItem = $(ValueData)
                else-ifstr(i) $(ValueName) == "WepReq"
                        set WepReqItem = $(ValueData)
				else-ifstr(i) $(ValueName) == "AuthentAlg"
						set AuthentAlgItem = $(ValueData)                        
  ; checkbox
                else-ifstr(i) $(ValueName) == "Pcmcia"
                        set PcmciaValue = $(ValueData)
  ; edit
                else-ifstr(i) $(ValueName) == "SSID"
                        set SSIDValue = $(ValueData)

                endif

        EndForListDo


        ifint $(PcmciaValue) == 1
                set Chk1 = "ON"
        else
                set Chk1 = "OFF"
        endif

        set IOBaseAddrUIVal = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrItem)))
        ifstr(i) $(IOBaseAddrUIVal) == ""
                set IOBaseAddrUIVal = *($(IOBaseAddrList), 1)
        endif

        set IRQValueUIVal = *($(IRQList), ~($(IRQValues),$(IRQValueItem)))
        ifstr(i) $(IRQValueUIVal) == ""
                set IRQValueUIVal = *($(IRQList), 6)
        endif

        set PHYParmUIVal = *($(PHYParmList), ~($(PHYParmValues),$(PHYParmItem)))
        ifstr(i) $(PHYParmUIVal) == ""
                set PHYParmUIVal = *($(PHYParmList), 1)
        endif

        set NetTypeUIVal = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeItem)))
        ifstr(i) $(NetTypeUIVal) == ""
                set NetTypeUIVal = *($(NetTypeList), 1)
        endif

        set TxRateUIVal = *($(TxRateList), ~($(TxRateValues),$(TxRateItem)))
        ifstr(i) $(TxRateUIVal) == ""
                set TxRateUIVal = *($(TxRateList), 1)
        endif

        set ATIMWindowUIVal = *($(ATIMWindowList), ~($(ATIMWindowValues),$(ATIMWindowItem)))
        ifstr(i) $(ATIMWindowUIVal) == ""
                set ATIMWindowUIVal = *($(ATIMWindowList), 1)
        endif

        set ListenIntervalUIVal = *($(ListenIntervalList), ~($(ListenIntervalValues),$(ListenIntervalItem)))
        ifstr(i) $(ListenIntervalUIVal) == ""
                set ListenIntervalUIVal = *($(ListenIntervalList), 6)
        endif

        set RTSThreshUIVal = *($(RTSThreshList), ~($(RTSThreshValues),$(RTSThreshItem)))
        ifstr(i) $(RTSThreshUIVal) == ""
                set RTSThreshUIVal = *($(RTSThreshList), 6)
        endif

        set FragThreshUIVal = *($(FragThreshList), ~($(FragThreshValues),$(FragThreshItem)))
        ifstr(i) $(FragThreshUIVal) == ""
                set FragThreshUIVal = *($(FragThreshList), 6)
        endif

        set PSModeUIVal = *($(PSModeList), ~($(PSModeValues),$(PSModeItem)))
        ifstr(i) $(PSModeUIVal) == ""
                set PSModeUIVal = *($(PSModeList), 1)
        endif

        set WepReqUIVal = *($(WepReqList), ~($(WepReqValues),$(WepReqItem)))
        ifstr(i) $(WepReqUIVal) == ""
                set WepReqUIVal = *($(WepReqList), 1)
        endif
        
		set AuthentAlgUIVal = *($(AuthentAlgList), ~($(AuthentAlgValues),$(AuthentAlgItem)))
		ifstr(i) $(AuthentAlgUIVal) == ""
				set AuthentAlgUIVal = *($(AuthentAlgList), 1)
		endif
		
        ;  Save the settings as they were read from the Registry.
exit

[Parm-UI-values]
                set IOBaseAddrUIVal             = $(Combo1Out)
                set IRQValueUIVal               = $(Combo2Out)
;                set TxRateUIVal                 = $(Combo3Out)
                set PHYParmUIVal                = $(Combo4Out)
                set NetTypeUIVal                = $(Combo5Out)
                set RTSThreshUIVal              = $(Combo6Out)
;                set FragThreshUIVal             = $(Combo7Out)
                set PSModeUIVal                 = $(Combo8Out)
                set WepReqUIVal                 = $(Combo9Out)
;                set ATIMWindowUIVal             = $(Combo10Out)
;                set ListenIntervalUIVal 		= $(Combo11Out)
				set AuthentAlgUIVal             = $(Combo12Out)

                set SSIDValue                   = *($(EditTextOut),1)
;Always set PcmciaValue = 1 in PRISM2_PCMCIA
;                Set Chk = *($(CheckItemsOut), 1)
;                Ifstr(i) $(Chk) == "ON"
                        Set PcmciaValue = 1
                        set Chk1 = "ON"
;                Else
;                        Set PcmciaValue = 0
;                        set Chk1 = "OFF"
;                Endif
exit
[pcIParm-UI-values]
;                set IOBaseAddrUIVal             = $(Combo1Out)
;                set IRQValueUIVal               = $(Combo2Out)
;                set TxRateUIVal                 = $(Combo3Out)
                set PHYParmUIVal                = $(Combo4Out)
                set NetTypeUIVal                = $(Combo5Out)
                set RTSThreshUIVal              = $(Combo6Out)
;                set FragThreshUIVal             = $(Combo7Out)
                set PSModeUIVal                 = $(Combo8Out)
                set WepReqUIVal                 = $(Combo9Out)
;                set ATIMWindowUIVal             = $(Combo10Out)
;                set ListenIntervalUIVal 		= $(Combo11Out)
				set AuthentAlgUIVal             = $(Combo12Out)

                set SSIDValue                   = *($(EditTextOut),1)

                Set Chk = *($(CheckItemsOut), 1)
                Ifstr(i) $(Chk) == "ON"
                        Set PcmciaValue = 1
                        set Chk1 = "ON"
                Else
                        Set PcmciaValue = 0
                        set Chk1 = "OFF"
                Endif
exit
[Parm-WriteReg]

        Debug-Output "Starting Parm-WriteReg."

        set IOBaseAddrValue             = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrUIVal)))
        set IRQValue                    = *($(IRQValues), ~($(IRQList),$(IRQValueUIVal)))
        set PHYParmValue                = *($(PHYParmValues), ~($(PHYParmList),$(PHYParmUIVal)))
        set NetTypeValue                = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeUIVal)))
        set TxRateValue                 = *($(TxRateValues), ~($(TxRateList),$(TxRateUIVal)))
        set ATIMWindowValue             = *($(ATIMWindowValues), ~($(ATIMWindowList),$(ATIMWindowUIVal)))
        set ListenIntervalValue 		= *($(ListenIntervalValues), ~($(ListenIntervalList),$(ListenIntervalUIVal)))
        set RTSThreshValue              = *($(RTSThreshValues), ~($(RTSThreshList),$(RTSThreshUIVal)))
        set FragThreshValue             = *($(FragThreshValues), ~($(FragThreshList),$(FragThreshUIVal)))
        set PSModeValue                 = *($(PSModeValues), ~($(PSModeList),$(PSModeUIVal)))
        set WepReqValue                 = *($(WepReqValues), ~($(WepReqList),$(WepReqUIVal)))
		set AuthentAlgValue             = *($(AuthentAlgValues), ~($(AuthentAlgList),$(AuthentAlgUIVal)))


        set NetValueList = {+
                        {MediaType,             $(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusNumber,             $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                        {BusType,               $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                        {IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                        {IoLength,              $(NoTitle),$(!REG_VT_DWORD),64},+
                        {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {Pcmcia,                $(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+
                        {MajorVersion,  $(NoTitle),$(!REG_VT_SZ),2},+
                        {MinorVersion,  $(NoTitle),$(!REG_VT_SZ),0},+
                        }
        set PRISMValueList = {+
                        {SSID,                  $(NoTitle),$(!REG_VT_SZ),       $(SSIDValue)},+
                        {RTSThresh,             $(NoTitle),$(!REG_VT_DWORD),$(RTSThreshValue)},+
                        {FragThresh,    $(NoTitle),$(!REG_VT_DWORD),$(FragThreshValue)},+
                        {Encapsulation, $(NoTitle),$(!REG_VT_DWORD),$(EthConvValue)},+
                        {TxRate,                $(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+
                        {WepReq,                $(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+
						{AuthentAlg,    		$(NoTitle),$(!REG_VT_DWORD),$(AuthentAlgValue)},+
                        {ATIMWindow,    $(NoTitle),$(!REG_VT_DWORD),$(ATIMWindowValue)},+
                        {ListenInterval,$(NoTitle),$(!REG_VT_DWORD),$(ListenIntervalValue)},+
                        {DecryptInDriver,$(NoTitle),$(!REG_VT_DWORD),$(DecryptInDriverValue)},+
                        {EncryptInDriver,$(NoTitle),$(!REG_VT_DWORD),$(EncryptInDriverValue)},+
                        {WEPFactor,             $(NoTitle),$(!REG_VT_DWORD),$(WEPFactorValue)},+
			{IBSSInDriver,  $(NoTitle),$(!REG_VT_DWORD),$(IBSSInDriverValue)},+
			{PreambleMode,  $(NoTitle),$(!REG_VT_DWORD),$(PreambleModeValue)},+
                        }
        set NetTypeValueList = {+
                        {NetworkType,   $(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
                        {PSMode,                $(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+
                        {PSLevel,               $(NoTitle),$(!REG_VT_DWORD),$(PSLevelValue)},+
                        }
        set PHYTypeValueList = {+
                        {DSChannel,             $(NoTitle),$(!REG_VT_DWORD),$(PHYParmValue)},+
                        }

;       Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
exit

;***************************************************************
;  Symbol SECTIONS
;***************************************************************

[ProductType]
        STF_PRODUCT  = Winnt
        STF_PLATFORM = I386

[Files-Inf]
        1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename)


[Files-PRISM2_PCMCIA]
		1, CW10NT.sys, SIZE=12800, RENAME=CW10.sys
		1, ndcprtns.sys, SIZE=7000      

[Files-PRISM2_PCI]
		1, CW10NT.sys, SIZE=12800, RENAME=CW10.sys
		1, ndcprtns.sys, SIZE=7000      
        
[pcMFiles-Dll]
        1, cw10.dll , SIZE=7168

[pcIFiles-Dll]
        1, cw10pci.dll , SIZE=7168

[FileConstantsENG]
        ProCaption                      = "Windows NT Setup"
        ProCancel                       = "Cancel"
        ProCancelMsg            		= "Windows NT Networking is not correctly installed.  "+
                                                "Are you sure you want to cancel copying files?"
        ProCancelCap            		= "Network Setup Message"
        ProText1                        = "Copying:"
        ProText2                        = "To:"

        FunctionTitle           		= $(GenericAdapterName)" Setup"

        ProductSoftwareDescription      = $(GenericDriverName)
        ProductHardwareDescription      = $(GenericAdapterName)

        ProductSoftwareTitle            = $(GenericDriverName)
        ProductHardwareTitle            = $(GenericAdapterName)

        pcMDialogDllName        = "cw10.dll"
        pcIDialogDllName        = "cw10pci.dll"   

		CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

        IOBaseAddrList          = ^(IOBaseAddrChoices, 1)
        IOBaseAddrValues        = ^(IOBaseAddrChoices, 2)

        IRQList                 = ^(IRQChoices, 1)
        IRQValues               = ^(IRQChoices, 2)

        DSChanList              = ^(DSChanChoices, 1)
        DSChanValues            = ^(DSChanChoices, 2)

        STA_NetTypeList         = ^(STA_NetTypeChoices, 1)
        STA_NetTypeValues       = ^(STA_NetTypeChoices, 2)

        STA_TxRateList          = ^(STA_TxRateChoices, 1)
        STA_TxRateValues        = ^(STA_TxRateChoices, 2)

        STA_ATIMWindowList      = ^(STA_ATIMWindowChoices, 1)
        STA_ATIMWindowValues= ^(STA_ATIMWindowChoices, 2)

        STA_ListenIntervalList  = ^(STA_ListenIntervalChoices, 1)
        STA_ListenIntervalValues= ^(STA_ListenIntervalChoices, 2)

        RTSThreshList           = ^(RTSThreshChoices, 1)
        RTSThreshValues         = ^(RTSThreshChoices, 2)

        FragThreshList          = ^(FragThreshChoices, 1)
        FragThreshValues        = ^(FragThreshChoices, 2)

        STA_PSModeList          = ^(STA_PSModeChoices, 1)
        STA_PSModeValues        = ^(STA_PSModeChoices, 2)

        WepReqList                      = ^(WepReqChoices, 1)
        WepReqValues            = ^(WepReqChoices, 2)

		AuthentAlgList          = ^(AuthentAlgChoices, 1)
		AuthentAlgValues        = ^(AuthentAlgChoices, 2)

[DialogConstantsENG]
        Help                            = "&Help"
        Exit                            = "Cancel"
        OK                                      = "OK"
        HelpContext                     = ""
        Continue                        = "Continue"
        Cancel                          = "Cancel"

;[MemoryMappedChoicesENG]
;       Map_1                           = 1, "ON"
;       Map_2                           = 0, "OFF"

[FileDependentDlgENG]
        DlgText                         = "Please select values for the follwing fields:"

        DlgType                         = "RadioCombination"
        DlgTemplate                     = "CW10"
        Caption                         = $(FunctionTitle)

        CBOptionsGreyed     		    = {}
        NotifyFields          			= {NO, NO}
        HelpContext                     = $(!IDH_DB_OEMNADE2_INS)

        Combo1Label                     = "I/O Base:"
        Combo2Label                     = "IRQ Level:"
        Combo3Label                     = "Tx Rate:"
        Combo4Label                     = $(PHYParmLabel)
        Combo5Label                     = "Mode:"
        Combo6Label                     = "RTS Threshold:"
        Combo7Label                     = "Fragmentation Threshold"
        Combo8Label                     = "Power Saving:"
        Combo9Label                     = "WEP:"
        Combo10Label           			= "ATIM Window:"
        Combo11Label         		    = "Listen Interval:"
        Combo12Label                    = "Authentication Algorithm"

        Edit1Label                      = "SS ID:"

        CheckBox1                       = "PCMCIA card"

        Combo1List                      = $(IOBaseAddrList)
        Combo1Out                       = $(IOBaseAddrUIVal)

        Combo2List                      = $(IRQList)
        Combo2Out                       = $(IRQValueUIVal)

        Combo3List                      = $(TxRateList)
        Combo3Out                       = $(TxRateUIVal)

        Combo4List                      = $(PHYParmList)
        Combo4Out                       = $(PHYParmUIVal)

        Combo5List                      = $(NetTypeList)
        Combo5Out                       = $(NetTypeUIVal)

        Combo6List                      = $(RTSThreshList)
        Combo6Out                       = $(RTSThreshUIVal)

        Combo7List                      = $(FragThreshList)
        Combo7Out                       = $(FragThreshUIVal)

        Combo8List                      = $(PSModeList)
        Combo8Out                       = $(PSModeUIVal)

        Combo9List                      = $(WepReqList)
        Combo9Out                       = $(WepReqUIVal)

        Combo10List                     = $(ATIMWindowList)
        Combo10Out                      = $(ATIMWindowUIVal)

        Combo11List                     = $(ListenIntervalList)
        Combo11Out                      = $(ListenIntervalUIVal)
        
		Combo12List                     = $(AuthentAlgList)
		Combo12Out                      = $(AuthentAlgUIVal)
		
        ComboListItemsIn        = {Combo1List,Combo2List,Combo3List,+
                                                        Combo4List, Combo5List, Combo6List,+
                                                        Combo7List, Combo8List, Combo9List,+
														Combo10List, Combo11List, Combo12List+
                                                        }
        ComboListItemsOut       = {Combo1Out,Combo2Out,Combo3Out,+
                                                        Combo4Out, Combo5Out, Combo6Out,+
                                                        Combo7Out, Combo8Out, Combo9Out,+
														Combo10Out, Combo11Out, Combo12Out+
                                                        }

        EditTextIn                      = {$(SSIDValue)}
        EditTextLim                     = {"32"}

        CheckItemsIn            = {$(Chk1)}

[IOBaseAddrChoices]
        IOBase_1                        = "4000",16384
        IOBase_2                        = "5000",20480
        IOBase_3                        = "6000",24576
        IOBase_4                        = "7000",28672
        IOBase_5                        = "8000",32768
        IOBase_6                        = "9000",36864
        IOBase_7                        = "A000",40960
        IOBase_8                        = "B000",45056
        IOBase_9                        = "C000",49152
        IOBase_10                       = "D000",53248
        IOBase_19                       = "180",384
        IOBase_11                       = "200",512
        IOBase_12                       = "240",576
        IOBase_13                       = "280",640
        IOBase_14                       = "2C0",714
        IOBase_15                       = "300",768
        IOBase_16                       = "340",832
        IOBase_17                       = "380",896
        IOBase_18                       = "3C0",960

[IRQChoices]
        IRQ_3                           = "3",3
        IRQ_4                           = "4",4
        IRQ_5                           = "5",5
        IRQ_7                           = "7",7
        IRQ_9                           = "9",9
        IRQ_10                          = "10",10
        IRQ_11                          = "11",11
        IRQ_12                          = "12",12
        IRQ_15                          = "15",15

[DSChanChoices]
       DSCHAN_1                        = "1",1
       DSCHAN_2                        = "2",2
       DSCHAN_3                        = "3",3
       DSCHAN_4                        = "4",4
       DSCHAN_5                        = "5",5
       DSCHAN_6                        = "6",6
       DSCHAN_7                        = "7",7
       DSCHAN_8                        = "8",8
       DSCHAN_9                        = "9",9
       DSCHAN_10                       = "10",10
       DSCHAN_11                       = "11",11
       DSCHAN_12                       = "12",12
       DSCHAN_13                       = "13",13
       DSCHAN_14                       = "14",14

[STA_NetTypeChoices]
        ;NETTYPE_ADHOC           = "Ad Hoc Station",3
        NETTYPE_INFRA           = "Infrastructure Station",1
        NETTYPE_PsIBSS          = "802.11 Ad Hoc Station",0

[STA_TxRateChoices]
        TXRATE_1                        = "1 Mb/s", 1
        TXRATE_2                        = "2 Mb/s", 2
        TXRATE_1_2                      = "Auto 1 or 2 Mb/s", 3
        TXRATE_55                       = "5.5 Mb/s", 4
        TXRATE_11                       = "11 Mb/s", 8
        TXRATE_ALL                      = "Fully Auto", 15

[STA_ATIMWindowChoices]
        ATIMWIN_0                       = "Disabled", 0
        ATIMWIN_10                      = "10 ms", 10
        ATIMWIN_20                      = "20 ms", 20
        ATIMWIN_30                      = "30 ms", 30
        ATIMWIN_40                      = "40 ms", 40
        ATIMWIN_50                      = "50 ms", 50
        ATIMWIN_60                      = "60 ms", 60
        ATIMWIN_70                      = "70 ms", 70
        ATIMWIN_80                      = "80 ms", 80
        ATIMWIN_90                      = "90 ms", 90

[STA_ListenIntervalChoices]
        LISTENINT_1                     = "1 Beacon Per", 1
        LISTENINT_2                     = "2 Beacon Per", 2
        LISTENINT_3                     = "3 Beacon Per", 3
        LISTENINT_4                     = "4 Beacon Per", 4
        LISTENINT_5                     = "5 Beacon Per", 5
        LISTENINT_M                     = "Maximum", 1

[STA_PSModeChoices]
        PS_DIS                          = "Disabled", 1
        PS_EN                           = "Enabled", 2

[RTSThreshChoices]
        RTSTHRESH_256           = "Always", 0
        RTSTHRESH_256           = "256 Bytes", 256
        RTSTHRESH_512           = "512 Bytes", 512
        RTSTHRESH_768           = "768 Bytes", 768
        RTSTHRESH_1024          = "1024 Bytes", 1024
        RTSTHRESH_1280          = "1280 Bytes", 1280
        RTSTHRESH_DIS           = "Disabled", 2560

[FragThreshChoices]
        FRAGTHRESH_256          = "256 Bytes", 256
        FRAGTHRESH_512          = "512 Bytes", 512
        FRAGTHRESH_768          = "768 Bytes", 768
        FRAGTHRESH_1024         = "1024 Bytes", 1024
        FRAGTHRESH_1280         = "1280 Bytes", 1280
        FRAGTHRESH_DIS          = "Disabled", 2560

[WepReqChoices]
        WEP_DIS                         = "Disabled", 0
		WEP_64                          = "64 Bit", 2
		WEP_128                         = "128 Bit", 6

[AuthentAlgChoices]
		AUTH_OPEN                       = "Open System", 1
		AUTH_SHARED                     = "Shared Key", 2


[STA_List]
        "PRISM2_PCMCIA"

[DS_List]
        "PRISM2_PCMCIA"


[ExCreateRegKey]
        Debug-Output "******************Entering [ExCreateRegKey]******************"
        set ECR_Result                  = NO_ERROR
        set ECR_BaseKeyHandle   = $($0)
        set ECR_NewPath                 = $($1)
        set KeyNull                             = ""
        set MAXIMUM_ALLOWED             = 33554432
        Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
        Debug-Output "                                  ECR_NewPath = "$(ECR_NewPath)
        Debug-Output "                                  MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
        Debug-Output "                                  KeyNull = "$(KeyNull)
        OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
                        ECR_BaseKey
        Debug-Output "ECR_BaseKey = "$(ECR_BaseKey)
        Debug-Output "  OpenRegKey returned "$($R0)
        Ifstr $(ECR_BaseKey) == $(KeyNull)
                Debug-Output "ECR_BaseKey == KeyNull"
        Else
                Debug-Output "ECR_BaseKey != KeyNull"
                set ECR_KeyHandle = $(ECR_BaseKey)
                goto  ECR_Return
        Endif
        set ECR_TmpPath = ""
        Split-String $(ECR_NewPath) "\" ECR_PList
        Debug-Output "ECR_PList = "$(ECR_PList)
        ForListDo $(ECR_PList)
        Ifstr(i) $($) != "\"
                Ifint $(#) == 1
                        set ECR_TmpPath = $($)
                Else
                        set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
                Endif
                Debug-Output "Determining if "$(ECR_TmpPath)" exists"
                OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
                Ifstr $(ECR_BaseKey) == $(KeyNull)
                        Debug-Output "Creating "$(ECR_TmpPath)
                        CreateRegKey $(ECR_BaseKeyHandle)  {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
                        Ifstr(i) $(ECR_KeyHandle) == $(KeyNull)
                                set ECR_Result = $($R0)
                                goto ECR_Return
                        Endif
                Endif
        Endif
        EndForListDo
ECR_Return = +
        return $(ECR_Result) $(ECR_KeyHandle)

;***************************************************************
;  Default SECTIONS
;***************************************************************

[Read-Defaults]
        ;  set the default values

        ; I/O Base Address              = 0x240
        set IOBaseAddrUIVal             = "240"

        ; IRQ Level = 9
        set IRQValueUIVal               = "9"

        ; PcmciaValue = 0/1
        set PcmciaValue                 = 1
        set Chk1                        = "ON"

        ; Ethernet conversion mode = "Encapsulated"/"RFC1042"/"802.1h"
;       set EthConvValue                = "802.1h"
        set EthConvValue                = 1

        ; Station Mode related default values
        set PSLevelValue                = 0;

        ; Power Save Mode = "Disabled"/"Basic"/"Enhanced"
        set PSModeList                  = $(STA_PSModeList)
        set PSModeValues                = $(STA_PSModeValues)
        set PSModeUIVal                 = "Disabled"

        ; configure as infrastructure station
        set NetTypeList                 = $(STA_NetTypeList)
        set NetTypeValues               = $(STA_NetTypeValues)
        set NetTypeUIVal                = "Infrastructure Station"

        ; configure for 11 Mb/s default
        set TxRateList                  = $(STA_TxRateList)
        set TxRateValues                = $(STA_TxRateValues)
        set TxRateUIVal                 = "Fully Auto"

        ; configure for ATIM Window Disabled
        set ATIMWindowList                      = $(STA_ATIMWindowList)
        set ATIMWindowValues            		= $(STA_ATIMWindowValues)
        set ATIMWindowUIVal                     = "Disabled"

        ; configure for Listen interval at MAX
        set ListenIntervalList                  = $(STA_ListenIntervalList)
        set ListenIntervalValues                = $(STA_ListenIntervalValues)
        set ListenIntervalUIVal                 = "Maximum"

        ; configure for RTS/CTS disabled
        set RTSThreshList               = $(RTSThreshList)
        set RTSThreshValues             = $(RTSThreshValues)
        set RTSThreshUIVal              = "Disabled"

        ; configure for Fragmentation disabled
        set FragThreshList              = $(FragThreshList)
        set FragThreshValues    		= $(FragThreshValues)
        set FragThreshUIVal             = "Disabled"

        ; configure for WEP Disabled
        set WepReqList                  = $(WepReqList)
        set WepReqValues                = $(WepReqValues)
        set WepReqUIVal                 = "Disabled"

		; configure for Authentication algorithm using Shared
		set AuthentAlgList              = $(AuthentAlgList)
		set AuthentAlgValues            = $(AuthentAlgValues)
		set AuthentAlgUIVal             = "Shared Key"
		
        ; PHY parameters DS
        set PHYParmName                 = "DSChannel";
        set PHYParmList                 = $(DSChanList)
        set PHYParmValues               = $(DSChanValues)
        set PHYParmUIVal                = "11"
        set PHYParmLabel                = "DS Channel:"

        ; Decryption to be done in Driver flag
        set DecryptInDriverValue                = 1;

        ; Encryption to be done in Driver flag
        set EncryptInDriverValue                = 1;

        ; WEP Factor value
        set WEPFactorValue              = 3;

	; IBSS to be managed by Driver flag
	set IBSSInDriverValue   = 1;

	; Set Preamble mode to Long=1
	set PreambleModeValue   = 1;

        ; default SSID - to be customized by OEM customer
        set SSIDValue                   = "ANY"

exit
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.81