define.ini Driver File Contents (UT_17b6.exe)

;
; Copyright 2001 
; It's Multi Language Control Files.
;
; This is Program File.
; 
; History: 
;     05.04.2001 -- First Version  
;     07.18.2001 -- Japan 1         
;     07.25.2001 -- J2 - DFU
;     07.26.2001 -- J2 - SNMP 
;     08.06.2001 -- J3
;     08.08.2001 -- WEP Key Check

[GLOBAL]
DlgTitle="Access Point USB Configuration Utility"

; 07.18.2001
SNMPDlgTitle="Access Point SNMP Configuration Utility"


; 07.25.2001
Warning="Warning"
; 07.26.2001
OK="OK"
CANCEL="Cancel"
CONNECT="Connect"
CLEAR="Clear"
CLOSE="Close"


;
Status="Status"
BasicSetting="Basic Setting"
Advanced="Advanced"
IPSetting="IP Setting"
Security="Security"
Info="Info"


;-------------------------
;STATUS
;-------------------------
WorkingStatus="Working Status"
RegulatoryDomain="Regulatory Domain"
FirmwareVersion="Firmware Version"
EthernetAddress="Ethernet Address"
ESSID="ESSID"
tChannel="Channel"
tWEP="WEP"
DriverNotLoad="Access Point was not found, the USB driver has not been loaded."
RestoreDefaultMess="Do you want to restore to factory defaults"
RestoreDefaultMessTitile="Warning"
RestoreDefaultDoing="Loading factory default settings, please wait..."
NoUSBDriver="The USB driver has not been loaded."
CanNotSetConf="Cannot set the configuration."
FoundAccessPoint="Access Point Found"
Channel="Channel "
Version="Ver. "
WEPDISABLE="Disable"
WEPKEY1="Enable Key (1)"
WEPKEY2="Enable Key (2)"
WEPKEY3="Enable Key (3)"
WEPKEY4="Enable Key (4)"
ReconnectButton="Reconnect"
RestoreDefaultButton="Restore Defaults"

; 07.18.2001
StatusConnect="Connecting ..."
Downloadapply="Do you want to download the new settings?"
Downloadapplytitle="Warning"
Downloading="Access Point is being set, please wait..."
Downloadfail="Failed to download configuration"
DownloadSuccess="Configuration downloaded successfully"

; 07.18.2001 SNMP
SNMPFindAPButton="Find AP"
SNMPReset="Reset"
SNMPDownloadfail="Access Point download failed"
SNMPAccessPointNotFound="Access Point not found"
SNMPResetOK="Reset complete."
SNMPResetFail="Reset fail."
SNMPRestoreFail="Restore defaults error"
SNMPFindAP="Finding Access Point..."
SNMPNOAUTHCOMMUNITY="Not an authorized Password. Please check."

; 07.25.2001
ResetAPFail="Cannot Reset AP!"
ResetAPOK="Reset AP Completed!"
ResetASK="Do you want to Reset Device ?"

;------------------------------
; BASIC SETTING
;------------------------------
BASICWARN="Warning :"
BASICTXT="The settings below have been detected by your wireless LAN clients, any changes to the values below, will alter your current wireless network configuration."
BASICBasicSetting="Basic Setting"
BASICESSID="ESSID"
BASICChannel="Channel"
BASICChannelTxt="Channel"

; 07.18.2001
BASICAPNAME="Access Point Name"


; 07.25.2001
ESSIDLengthZero="ESSID Length Zero"
APNAMELengthZero="Access Point Name Length Zero"

; 07.26.2001 
WEPKEYCHECK="WEP Key invalid, Please check"

;-------------------------------
; ADVANCED
;-------------------------------
ADVANCEDWARN="Warning :"
ADVANCEDTXT="Please refer to the Access Point User Guide before making any changes to the fields below"
ADVANCEDFrag="Fragmentation Threshold"
ADVANCEDRTS="RTS Threshold"

ADVANCEDAuthType="Authentication Type"
ADVANCEDAuthOpen="Open System"
ADVANCEDAuthShare="Shared Key"
ADVANCEDAuthBoth="Both"

ADVANCEDPreambleType="Preamble Type"
ADVANCEDShortPreamble="Short Preamble"
ADVANCEDLongPreamble="Long Preamble"

ADVANCEDBasicRates="Rates(Mbps)"
ADVANCED12M="1-2 (MBps)"
ADVANCED125511M="1-2-5.5-11(Mbps)"
ADVANCEDAutoRateFallBack="Auto Rate Fall Back"

; 07.18.2001
ANTENNA="Antenna Diversity"
ANTENNAR="Receive Antenna"
ANTENNAT="Transmit Antenna"
; 08.24.2001 don't show antenna 1 and antenna 2
ANTENNA1="Left"
ANTENNA2="Right"
ANTENNAB="Both"
OperationMode="Operational Mode"


; 07.18.2001 (Operation Mode)
OPERMODETITLE="Operational Mode"
OPERMODE1="Access Point"
OPERMODE2="Access Point Client"
OPERMODE3="Wireless Bridge"
OPERMODE4="Point to Point"
OPERMODE5="Point to MultiPoint"
OPERMODEBSS="Preferred BSS"
OPERMODEMAC="Remote MAC Address"

; 07.26.2001
OPPressBSSLengthinvaild="Preferred BSS Length invalid"
OPRemoteMacLengthinvaild="Remote MAC Address Length invalid"

; 07.25.2001 
FragmentationCompare="Fragmentation Threshold between 256 and 2346"
RTSThresholdCompare="RTS Threshold between 256 and 2346"
ChooseOne="Please choose one more rate item"



; -------------------------
; WEP
; -------------------------
WEPWARN="Warning :"
WEPTXT="The security settings of the network clients, must match those of the Access Point. Or, your network clients will not be able to communicate with the Access Point."
WEPWEPTXT="WEP"
WEPPASSPHARSETXT="Passphrase"
WEPKEY1TXT="Key 1"
WEPKEY2TXT="Key 2"
WEPKEY3TXT="Key 3"
WEPKEY4TXT="Key 4"

WEPKEYSETTINGTXT="WEP Key Setting"
WEPDEFAULTKEYTXT="Default Key"
WEPAUTHORIZEDMAC="Authorization Table Enable"
WEPCOMMUNITYSET="Password Setting"

WEPDISABLE2="Disable"
WEP64WEP="64-bit WEP"
WEP128WEP="128-bit WEP"

WEPDONE="done"

; New Add 08.08.2001
;Warning="Warning"
NOKEYCHANGE="Wep keys have no any change, please check"





; 07.18.2001 SNMP
SNMPAUTHMACBUTTON="Authorized Mac"

; 07.18.2001 (Community Setting)
CommunityTitle="Password Setting"
CommunityRW="Read/Write"
CommunityRW1="New Password"
CommunityRW2="Confirm Password"
CommunityR="Read Only"
CommunityR1="New Password"
CommunityR2="Confirm Password"

; 07.26.2001
CommunityPassFail="Invalid Password"

; 07.25.2001
WEPKey1Compare64="WEP Key 1 Length invalid"
WEPKey2Compare64="WEP Key 2 Length invalid"
WEPKey3Compare64="WEP Key 3 Length invalid"
WEPKey4Compare64="WEP Key 4 Length invalid"
WEPKey1Compare128="WEP Key 1 Length invalid"
WEPKey2Compare128="WEP Key 2 Length invalid"
WEPKey3Compare128="WEP Key 3 Length invalid"
WEPKey4Compare128="WEP Key 4 Length invalid"

; 07.26.2001
CommunitySetReadFail="Read Password failed"
CommunitySetRWFail="Read/Write Password failed"
SetAuthMacEnableFail="Failed to connect with Access Point"


; 07.18.2001 (IP Setting)
IPSetTitle="An IP address must be specified in order to manage the Access Point form the network. Ask your network administrator for an IP address, and type it in the space below."
IPSetIPSet="IP Setting"
IPSetIPAddress="IP Address"
IPSetIPMask="IP Mask"
IPSetDHCPTxt="Enable/Disable DHCP Client ; Primary port: the interface which determines the DHCP Server "
IPSetDHCPSET="DHCP Setting"
IPSetDHCPCHECK="DHCP Enable"
IPSetPPort="DHCP Primary Port"
IPSetWireless="Wireless"
IPSetEthernet="Ethernet"
IPSetIPFiltering="IP Filtering"
IPSetGTxt="Gateway"



;------------------------------
; INFO
;
INFOBITMAP="oem.bmp"
INFOH1="Copyright (c) 2000-2001"
INFOH2="Access Point"
INFOH3="USB Configuration Utility v1.7b.6"
INFOH4="08.24.2001"
INFOWARN="Warning: This computer program is protected by copyright law and international treaties."

; 07.18.2001 SNMP
SNMPINFOH1="Copyright (c) 2000-2001"
SNMPINFOH2="Access Point"
SNMPINFOH3="SNMP Configuration Utility v1.7b.5"
SNMPINFOH4="08.22.2001"
SNMPSTATIONBTN="Stations"
SNMPSTATISTICSBTN="Statistics"
SNMPTRAPLOGBTN="TrapLog"


; enable www button
INFOWWWSHOW="0"
INFOWWW="http://"

INFOLINESHOW="0"

INFOTECHSHOW="0"
INFOTECH="Technical Support:"

INFOEMAILSHOW="0"
INFOEMAIL="Email: "







; ToolTip 07.25.2001
; Basic
TTBasicEDIT_ESSID="Enter a unique name for Extended Service Set Identification"
TTBasicChannelFCC="Enter the radio channel from 1 to 11"
TTBasicChannelETSI="Enter the radio channel from 1 to 13"
TTBasicChannelMKK1="Enter the radio channel from 1 to 14"
TTBasicAPNAME="Enter the name of the Access Point "

; Advaned
TTAdvancedAUTHOPN="Select Open System enabled for mobile station"
TTAdvancedAUTHSHARE="Select Shared Key enabled using WEP key information defined "
TTAdvancedAUTHBOTH="Select to use both the Open System and Shared Key authentication type (Default)"
TTAdvancedPREAMBLSHORT="Select for short packet header "
TTAdvancedPREAMBLELONG="Select for long packet header (Default) "
TTAdvancedRATE1="Select basic/support rate "
TTAdvancedRATEAUTO="Automatically adjust data rate (Default)"
TTAdvanedFragmentation="Above the value which MPDU fragmentation will be performed"
TTAdvancedRTSThreshold="Above the value which an RTS/CTS handshake will be performed"
TTAdvanedRANTENNA="You can choose the antenna diversity or not"
TTAdvancedTANTENNA="You can choose the antenna diversity or not"

; IP Setting
TTIPSETIPADDRESS1="Enter Access Point IP Address"
TTIPSETIPADDRESS2="Enter Access Point IP Mask"
TTIPSETDHCPCHECK="Enable/Disable DHCP Client"
TTIPSETETHERNET="Set Ethernet Primary Port"
TTIPSETWIRELESS="Set Wireless Primary Port"
TTIPSETROUTTECHECK="Filter TCP/IP protocol or not"
TTIPSETIPADDRESS3="Access Point gateway ip address"

; WEP(Security)
TTWEPWEP="Enable or Disable Wired Equivalent Privacy"
TTWEPPASSPHRASE="Enter a uniqe name to generate key 1,2,3 and 4"
TTWEPPASSPHRASEDONE="Generate WEP key"
TTWEPKEY1="Enter a unique number or use Passphrase prompt to generate the unique number for key 1"
TTWEPKEY2="Enter a unique number or use Passphrase prompt to generate the unique number for key 2"
TTWEPKEY3="Enter a unique number or use Passphrase prompt to generate the unique number for key 3"
TTWEPKEY4="Enter a unique number or use Passphrase prompt to generate the unique number for key 4"
TTWEPKEYS="Select key number to use for Wired Equivalent privacy"
TTWEPAUTHMAC="Enable/Disable Authorization Table, please set table content by SNMP Utility"
TTWEPAUTHMACSNMP="Enable/Disable Authorization Table and content"



; 07.26.2001
; CONNTECT DIALOG
CONNIPADDRESS="IP Address"
CONNPASSWORD="Password"
CONNTitle="  Connect to Access Point"

; SCANLIST DIALOG
SCANLISTtitle=" Available Access Points"
SCANLISTName="Name"
SCANLISTIPADDRESS="IP Address"

; Trap Log Dialog
TrapLogTitle="Trap Log"

; Auth Mac Dialog
AuthMacTitle=" Authorized Mac Addresses"
AuthMacLoadFile="Load File"
AuthMacGetFlash="Get flash"
AuthMacDownload="Download"
AuthMacTableEnable="Authorization Table Enable"
AuthMacNo="No"
AuthMacMacAddress="Mac Address"
AuthMacCannotOpen="Can't open "
AuthMacInvaildMacLength="Invalid address length"
AuthMacLoadMacFail="Load Mac Addresses Fail"
AuthMacDownloadASK="Do you want to Download these Mac Addresses?"
AuthMacDownFail="Download Authorized Mac Addresses failed"
AuthMacNoAuthorizedMac="There are not Authorized Mac Addresses recorded"


; Associate Station
ASTitle="Associated Stations"
ASNO="No"
ASMacAddress="Mac Address"

;Statistics
SNMPSTATTITLE="Statistics"
SNMPSTATW00="Wireless Statistics"
SNMPSTATW01="Unicast Transmitted Packets"
SNMPSTATW02="Broadcast Transmitted Packets"
SNMPSTATW03="Multicast Transmitted Packets"
SNMPSTATW04="Transmitted Beacon"
SNMPSTATW05="Unicast Received Packets"
SNMPSTATW06="Broadcast Received Packets"
SNMPSTATW07="Multicast Received Packets"
SNMPSTATW08="Received Beacon"

SNMPSTATL00="Ethernet Statistics"
SNMPSTATL01="Total Bytes"
SNMPSTATL02="Total Packets"
SNMPSTATL03="Packet CRC Errors"
SNMPSTATL04="Multicast Packets"
SNMPSTATL05="Broadcast Packets"
SNMPSTATL06="Total Bytes"
SNMPSTATL07="Total Packets"
SNMPSTATL08="Packet CRC Errors"
SNMPSTATL09="Multicast Packets"
SNMPSTATL10="Broadcast Packets"
SNMPSTATRR="Received Packets"
SNMPSTATTT="Transmitted Packets"


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.54