1. ana1026.zip Driver
2. ANALYZER.INI File Contents

ANALYZER.INI Driver File Contents (ana1026.zip)

[October 23, 1995]

;Print channel switch and sync messages.
;  If want to see
;   "-----Switching to channel NNN at ......."
;   "Forward Sync found at ....."
;   "Forward Sync lost at ......"
;      messages, then set = 1.     [Default=0]
;
PrintChanMsgs=0


[July 25, 1995]

;Statistics window size
;  WinSlotSize determines how often (in sec) to sample the statistics
;     default = 1
;  WinSize determines how many samples to take in a full window. 
;     default=5 max=10
;
;i.e. (WinSlotSize * WinSize) is the size (in sec) of a statistics window
WinSlotSize = 1
WinSize = 5


[June 2, 1995]

; List of RF channels to search  
;  6/2/95
;  If this list contains channel(s), analyzer will use this list
;    for initial acquisition and channel hopping.  That is, this
;    list overrides the service option for initial acquisition
;    and the broadcast channel lists for channel hopping/cell transfers.
;  The analyzer can only acquire a channel that is not on this list
;    via a directed hop or manually switched via "Switch Channel"
;    command on the radio menu.
;     
; Example: 
;  RfChannels=720 722 724 725 726 730 732 736
RfChannels=


[February 9, 1995]

; frequency of tones (Hz) applied when channel changes 
;                 [Default = 440]  ( 0 ==> no tone)
BeepTone=440

[September 26, 1994]

; Number of forward sync losses allowed during specified time period before 
;   declaring synchronization failure and advancing to next channel. 
;                                           [Default = 10]
SyncLossThreshold=10

; Time period over which sync losses are counted.
;   [Units = 100 msec. Default = 50 --> 5 seconds]
SyncErrorTime=50


[September 1, 1994]

;Option for RF channel searching.
;  0 = System A Preferred
;  1 = System B Preferred
;  2 = System A Only
;  3 = System B Only
ServiceOption=0 

;Automatic RF search (1=ON, 0=manual control)
RfSearch=1

; Maximum time (in PC ticks) to search for RF channel 
;   before restarting initial acquisition.
;    (PC ticks: 18/sec;   30000 = ~27 minutes)
TicksAcquisition=30000 

; Maximum time (in PC ticks) to acquire sync on one channel 
;   before moving on to next.  
TicksAcqSync=3

; Maximum PC Ticks to wait to receive a Channel ID before giving up on this channel
TicksWaitChanId=400

; Frequency of RSSI values received from RF (in msec).
AutoRssiMsec=100

[August 14, 1994]
;Maximum Capture File size in megabytes. Default = 10. Leaves 1 mb free disk space
MaxCaptureFileSize=10

; Reverse RSSI threshold to detect reverse sync, relative to -114 dbM
RevRssiThreshold=5

; Forward RSSI threshold to detect forward sync, relative to -114 dbM
FwdRssiThreshold=5

; The Radio COM port is the same as the SlipPort
; Slip COM port  (1 = COM1, 2 = COM2)
SlipPortNum=1 

; Data Encryption enable = 1 (Simply doesn't complain about invalid data)
EncryptData=1 

; Diagnostic output for radio communications = 1
DebugRf=0

; Enable Analysis Log File Prompt
AnalysisLogPrompt=0