********************************************************* * Product: Intel(R) Chipset Software Installation Utility * Release: Production Version * Version: 5.00.1012 * Target Chipset#: Intel(R) 82865 G/PE/P, Intel(R) 82875P * Date: March 12, 2003 ********************************************************* #: For the list of supported chipsets, please refer to the Release Notes ********************************************************* * CONTENTS OF THIS DOCUMENT ********************************************************* This document contains the following sections: 1. Overview 2. System Requirements 3. Contents of the Distribution Package 4. List of Available Command Line Flag Options 5. Contents of the Extracted Files 6. Installing the Software in Interactive Mode 7. Installing the Software in Silent Mode 8. Installing the INF Files Prior to OS Installation 8A. Installing the Windows* XP INF Files Prior to OS Installation 8B. Installing the Windows* 2000 INF Files Prior to OS Installation 8C. Installing the Windows* 98SE/Windows* Me INF Files Prior to OS Installation 9. Installing the INF Files After OS Installation 9A. Installing the Windows* XP INF Files after OS Installation 9B. Installing the Windows* 2000 INF Files after OS Installation 9C. Installing the Windows* 98SE/Windows* Me INF Files after OS Installation 10. Verifying Installation of the Software and identifying the Software Version Number 11. Troubleshooting ************************************************************ * 1. OVERVIEW ************************************************************ The Intel(R) Chipset Software Installation Utility installs to the target system the Windows* INF files that outline to the operating system how the Intel(R) chipset components will be configured. This is needed for the proper functioning of the following features: - Core PCI and ISAPNP Services - AGP Support - IDE/ATA33/ATA66/ATA100 Storage Support - USB Support - Identification of Intel(R) chipset components in the Device Manager This software can be installed in three modes: Interactive, Silent and Unattended Preload. The Interactive Mode requires user input during installation; the Silent Mode and Unattended Preload do not. Additionally, this software offers a set of command line flag options that enables extended installation functionality. The command line flags are not case sensitive. See Section 4 for detailed descriptions of these flags. Important Note: The Intel(R) Chipset Software Installation Utility is distributed in two formats -- self extracting .EXE files (INFINST_xxx.EXE) or compressed .ZIP files (INFINST_xxx.ZIP). Depending on which distribution format is being executed, the command-line syntax may differ. See Section 4 for more details. ************************************************************ * 2. SYSTEM REQUIREMENTS ************************************************************ 1. The software included with this distribution package is designed to operate with the following chipset configurations: Note: Please refer to the release notes for the list of supported chipsets. 2. One of the following operating systems must be fully installed and running on the system before installing this software: Windows* 98SE 4.10.2222 (Original Release) Windows* Me 4.90.3000 (Original Release) Windows* 2000 5.00.2195 (Original Release) Windows* XP 5.10.2600 (Original Release) To verify which operating system has been installed onto the target system, follow the steps below: a. Click on Start. b. Select Settings. c. Select Control Panel. d. Double-click on the System icon. e. Click on the General system properties tab. f. Verify, which OS has been installed by reading the System information. 3. It is recommended that the software be installed on systems with at least 32MB of system memory when using Windows* 98SE and Windows* Me. Windows* 2000 and Windows* XP require at least 64MB of system memory. 4. It is recommended that there be a minimum of 5MB of hard disk space on the system in order to install this software. 5. Check the System Requirements. The operating system must be fully installed and running on the system before running this software. 6. Close any running applications. Otherwise, you may experience difficulties. 7. It is recommended that the Intel(R) Chipset Software Installation Utility be installed onto the target system prior to the installation of other drivers. Please check with your system provider to determine which operating system and Intel(R) chipset are used in your system. ************************************************************ * 3. CONTENTS OF THE DISTRIBUTION PACKAGE ************************************************************ The Intel(R) Chipset Software Installation Utility package contains the following items: File(s) ------- INFINST_xxx.EXE -or- INFINST_xxx.ZIP README.TXT, RELEASE_xxx.HTM *** NOTE: Only the files that reference the currently detected devices are copied to the system. If the -A option is exercised, the files are not copied to the <Windows>\INF directory. See Section 4 for more information. ************************************************************ * 4. LIST OF AVAILABLE COMMAND LINE FLAG OPTIONS ************************************************************ The Intel(R) Chipset Software Installation Utility supports several command line flags for various installation options. All command line flags and parameters must be separated by a space, except for the language code after the '-L' flag. Due to the different distribution formats available for the Intel(R) Chipset Software Installation Utility, the command line flag syntax may vary: 1. Self-Extracting .EXE Distribution: When installing this software using the .EXE distribution, an extra '-A' must be appended to the INFINST_xxx.EXE program call (i.e. INFINST_ENU.EXE -A) in order to successfully pass command line parameters. Note: The extra '-A' flag for the self-extracting .EXE package is DIFFERENT from the '-A' command line flag option described below, under Compressed .ZIP Distribution. Example: To extract INF files using the '-A' flag described below, the installation program should be invoked as follows: INFINST_ENU.EXE -A -A (optional -P) 2. Compressed .ZIP Distribution: When installing this software using the .ZIP distribution, there is no need to append any extra flags to the SETUP.EXE program call in order to pass command line flags. Example: To extract INF files using the '-A' flag described below, the installation program should be invoked as follows: SETUP.EXE -A (optional -P) Below is a list of all the available command line flags that may be used with the program call. Note that the '-L' and the '-S' flags MUST be specified at the end of the command line flag list. Flag Description ---- ----------- -? Help flag. Displays the list of available command line flags. This parameter works in the Interactive Mode only. -A Extracts the INF files and README.TXT to either "C:\Program Files\Intel\InfInst" or the <Installation Path> directory specified using the '-P' flag. The software will NOT install these INF files to the system. This flag can be combined only with the '-P' flag option. All other options will be ignored if the '-A' flag is specified. This parameter works in either Silent Mode or Interactive Mode. -B Automatically reboots the system after installation. This flag is ignored if '-A' flag is specified. This parameter works in either Silent Mode or Interactive Mode. -H<mode> This flag enables DMA Mode for an IDE device. -L<LangCode> Forces the InstallShield* user interface to display the specified language during setup. Note that there should be NO spaces between '-L' and the 4-digit language code (see below). This flag and the '-S' flag must be placed at the end of the command line flag list. This parameter works in Interactive Mode only. -NOLIC This flag disables the license agreement dialogue box during installation. This parameter works in Interactive Mode only. -NOREAD This flag disables the readme display during installation. This parameter works in Interactive Mode only. -NOWEL This flag disables the welcome screen during installation. This parameter works in the Interactive Mode only. -OVER ALL This flag will update ALL INF drivers even if third party drivers are currently installed. This parameter works in Interactive Mode only. -OVER FWH This flag will update the Security drivers even if a third party Security driver is currently installed. This parameter works in Interactive Mode only. -OVER IDE This flag will update the Storage drivers even if a third party Storage driver is currently installed. This parameter works in Interactive Mode only. -OVER SMB This flag will update the LAN drivers even if thrid party LAN drivers are currently installed. This parameter works in Interactive Mode only. -P <Installation Path> Specifies the HDD location to which the INF program files are copied. If this flag is not specified at the command line, the <Installation Path> directory is by default assumed to be: C:\Program Files\Intel\INFInst If this flag is used without the '-A' option, only README.TXT will be copied to <Installation Path>. The directory name can include spaces. In this case, however, a pair of double quotes (") must enclose the directory name. This parameter works in either Silent Mode or Interactive Mode. -S Runs the Installer in Silent Mode. No user interface is displayed. This flag and the '-L' flag must be placed at the end of the command line flag list. -SKIP<DevID> This flag will allow one or more devices to not be installed. Below are the language codes used with the '-L' flag: Language <LangCode> -------- ---------- Chinese (Simplified) 0804 Chinese (Traditional) 0404 Czech 0005 Danish 0006 Dutch 0013 English (United States) 0009 Finnish 000B French (Canada) 0C0C French (Standard) 040C German 0007 Greek 0008 Hungarian 000E Italian 0010 Japanese 0011 Korean 0012 Norwegian 0014 Polish 0015 Portuguese (Brazil) 0416 Portuguese (Standard) 0816 Russian 0019 Spanish 000A Swedish 001D Thai 001E Turkish 001F ************************************************************ * 5. CONTENTS OF THE EXTRACTED FILES ************************************************************ INF files are copied to the hard disk drive after running the Intel(R) Chipset Software Installation Utility executable with a '-A' flag (i.e., "INFINST_ENU.EXE -A -A" or "SETUP.EXE -A"). The location of the INF files depends on whether a '-P' flag is specified along with the '-A' flag: 1. If a '-P' flag is NOT specified, then the INF files are copied to the following directory: "C:\Program Files\Intel\INFINST" 2. If a '-P' flag IS specified, then the INF files are copied to the location listed immediately after the '-P' flag. See Section 4 for more information on flag usage. After INF file extraction, the INF files and components are copied to the <INF Extract Directory>. These files and components are categorized according to the Intel(R) Chipset types. The following table summarizes the locations of the INF files, by chipsets: NOTE: The INF files are designed to update ONLY devices not supported by the corresponding operating systems. NOTE: "<INF Extract Directory>" is abbreviated "<IED>" in the remainder of this section. For each subdirectory of <IED> (e.g., ICH, ICH2, etc), the INF files are further classified according to the operating systems they are designed for: Win98SE\ ---> Contains INF files designed for Windows* 98SE ONLY. Win2000\ ---> Contains INF files designed for Windows* 2000 ONLY. WinME\ ---> Contains INF files designed for Windows* Me ONLY. WinXP\ ---> Contains INF files designed for Windows* XP ONLY. NOTES: 1. INFPrelo.INF makes a CUSTOM.INF template that installs the INF files for Intel(R) chipsets during OS setup. OEMs can incorporate this file into the SETUP directory for the OEM Preload Kit. (Refer to Section 8 for more details.) ************************************************************ * 6. INSTALLING THE SOFTWARE IN INTERACTIVE MODE ************************************************************ 1. Verify that all system requirements have been met as described in section 2. 2. Run the InstallShield* installation program: Self-extracting .EXE distribution: INFINST_xxx.EXE Compressed .ZIP distribution: SETUP.EXE 3. You will be prompted to agree to the license agreement. If you do not agree, the Installer will exit before extracting any files. 4. Follow the on-screen instructions and use the default settings to complete the setup, once the operating system has rebooted. 5. This completes the installation of the Intel(R) Chipset Software Installation Utility. ************************************************************ * 7. INSTALLING THE SOFTWARE IN SILENT MODE ************************************************************ 1. Verify that all system requirements have been met as described in section 2. 2. Run the InstallShield* installation program: For silent install with auto-reboot: Self-extracting .EXE distribution: INFINST_xxx.EXE -a -b -s Compressed .ZIP distribution: SETUP.EXE -b -s - OR - For silent install without auto-reboot: Self-extracting .EXE distribution: INFINST_xxx.EXE -a -s Compressed .ZIP distribution: SETUP.EXE -s 3. The utility will perform the necessary updates and record the installation status in the following system registry key: HKEY_LOCAL_MACHINE\Software\Intel\INFInst 4. If the utility was invoked with the "-b" flag, the system will automatically reboot if the update was successful. NOTE: The system MUST be rebooted for all device updates to take effect. 5. To determine whether the install was successful, verify the "install" value in the registry key specified in Step 3. 6. In Silent Mode the utility will not display the license agreement. When using Silent Mode the license agreement, license.txt, will be placed in the following folder: Program Files/Intel/INFInst folder. Please read this agreement. The following table describes the various parameters: Name Type Data Description ----- ---- ---- ----------- "install" String "success" The installation was successful. "fail" The installation was not successful. No INF files were copied to the system. "reboot" String "Yes" A reboot is required to complete the installation. "No" No reboot is required to complete the installation. "version" String <varies> Current version number of the Intel(R) Chipset Software Installation Utility ************************************************************ * 8. INSTALLING THE INF FILES PRIOR TO OS INSTALLATION ************************************************************ 1. Copy the OS installation files from the setup directory to a directory on the hard disk. This procedure requires a minimum of 5MB of hard disk space. It is important to make sure there is enough disk space before beginning the copy process. This can be done by opening 'My Computer' and then right clicking on the correct drive and selecting 'Properties'. The directories shall be referred to as follows: Windows* XP : <WINXP Setup Directory> Windows* 2000 : <WIN2000 Setup Directory> Windows* 98SE : <WIN98SE Setup Directory> Windows* Me : <WINMe Setup Directory> ************************************************************ * 8A. INSTALLING THE WINDOWS* XP INF FILES PRIOR TO * OS INSTALLATION ************************************************************ NOTE: The Windows* XP OEM Preload Kit distribution CD contains a setup directory with all the base OS setup files and installation programs (WINNT.EXE and WINNT32.EXE). The name of the directory may vary depending on the distribution CD (e.g., \I386\). 1. Create the following directory structure under the <WINXP Setup Directory>: \$OEM$\$$\INF 2. Copy the Windows* XP INF files from <INF Extract Directory>\XXXX\WinXP to the directory created in Step 1 above: <WINXP Setup Directory>\$OEM$\$$\INF Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 3. Create the following directory structure under the <WINXP Setup Directory>: \$OEM$\$1\drivers\IntelINF 4. Copy the Windows* XP INF files AND the catalog files (.CAT) from <INF Extract Directory>\XXXX\WinXP to the directory created in Step 4 above: <WINXP Setup Directory>\$OEM$\$1\drivers\IntelINF Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 5. Either modify the default Windows* XP installation answer file, UNATTEND.TXT, located in <WINXP Setup Directory>, or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" A sample answer file for preloading the Intel(R) Chipset Software Installation utility files is available: <INF Extract Directory>\XXXX\WinXP\INFAnswr.TXT For more information about Windows* XP answer files and unattended installations, please refer to the Microsoft* Windows* XP Guide to Unattended Setup. For more information about the \$OEM$ folder, see the Microsoft Windows* XP OEM Preinstallation Kit (OPK) User Guide, if you are a computer manufacturer. Otherwise, see the Microsoft Windows* XP Deployment Guide. 6. Run "WINNT.EXE /u:<answer file name> /s:<WINXP Setup Directory>" to install Windows* XP. ************************************************************ * 8B. INSTALLING THE WINDOWS* 2000 INF FILES PRIOR TO * OS INSTALLATION ************************************************************ NOTE: The Windows* 2000 OEM Preload Kit distribution CD contains a setup directory with all the base OS setup files and installation programs (WINNT.EXE and WINNT32.EXE). The name of the directory may vary depending on the distribution CD (e.g., \I386\). 1. Create the following directory structure under the <WIN2000 Setup Directory>: \$OEM$\$$\INF 2. Copy the Windows* 2000 INF files from <INF Extract Directory>\XXXX\Win2000 to the directory created in Step 1 above: <WIN2000 Setup Directory>\$OEM$\$$\INF Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 3. Create the following directory structure under the <WIN2000 Setup Directory>: \$OEM$\$1\drivers\IntelINF 4. Copy the Windows* 2000 INF files AND the catalog files (.CAT) from <INF Extract Directory>\XXXX\Win2000 to the directory created in Step 4 above: <WIN2000 Setup Directory>\$OEM$\$1\drivers\IntelINF Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 5. Either modify the default Windows* 2000 installation answer file, UNATTEND.TXT, located in <WIN2000 Setup Directory>, or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" A sample answer file for preloading the Intel(R) Chipset Software Installation utility files is available: <INF Extract Directory>\XXXX\Win2000\INFAnswr.TXT For more information about Windows* 2000 answer files and unattended installations, please refer to the Microsoft* Windows* 2000 Guide to Unattended Setup. For more information about the \$OEM$ folder, see the Microsoft Windows* 2000 OEM Preinstallation Kit (OPK) User Guide, if you are a computer manufacturer. Otherwise, see the Microsoft Windows* 2000 Deployment Guide. 6. Run "WINNT.EXE /u:<answer file name> /s:<WIN2000 Setup Directory>" to install Windows* 2000. ************************************************************ * 8C. INSTALLING THE Windows* 98SE/WINDOWS* Me * INF FILES PRIOR TO OS INSTALLATION ************************************************************ NOTE: The Windows* 98SE or Windows* Me OEM Preload Kit distribution CD contains a setup directory with all the base OS setup files (*.CAB) and the installation program (SETUP.EXE). The name of the directory may vary depending on the distribution CD (e.g., \WIN98SE\). 1. Copy the Windows* 98SE INF files from <INF Extract Directory>\XXXX\Win98SE to the setup directory identified in Step 1 above, if you are preloading Windows* 98SE. -or- Copy the Windows* Me INF files from <INF Extract Directory>\XXXX\WinME to the setup directory identified, if you are preloading Windows* Me. Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 3. Run SETUP.EXE to install Windows* 98SE or Windows* Me. ************************************************************ * 9. INSTALLING THE INF FILES AFTER OS INSTALLATION ************************************************************ ************************************************************ * 9A. INSTALLING THE WINDOWS* XP INF FILES AFTER OS * INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows* XP so it may not be necessary to use the INF files provided by this software to update Windows* XP. The following steps describe the installation process of the Windows* XP INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by Windows* XP. 1. Copy the contents of the <INF Extract Directory>\XXXX\WinXP directory to the root directory of the floppy disk (A:\). Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select Control Panel. 6. Double-click on System icon. 7. Click on Hardware tab. 8. Click on Device Manager button. 9. Select "Devices by connection" under the View menu. 10. Click on MPS Uniprocessor PC -OR- MPS Multiprocessor PC. NOTE: Only one of the above items will be displayed for a given system. 11. Click on PCI bus. 12. Right-click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 13. Select Properties from the pull-down menu. 14. Click on the Driver tab. 15. Click on Update Driver button. 16. Windows* XP will launch the Upgrade Device Driver Wizard. Select Next. 17. Ensure that the following choice is selected: Search for a suitable driver for my device (recommended) 18. Insert the floppy containing the Windows* 2000 INF files into the floppy drive. 19. Select Next. 20. Windows* XP will list locations from where the updated driver file can be found. Ensure that the following choice is selected: Floppy disk drives 21. Select Next. 22. Windows* XP should report that a driver has been found: (The detected device name will be displayed.) Select Next. 23. Select Finish. 24. Restart the system when prompted to do so. ************************************************************ * 9B. INSTALLING THE WINDOWS* 2000 INF FILES AFTER OS * INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows* 2000, so it may not be necessary to use the INF files provided by this software to update Windows* 2000. The following steps describe the installation process of the Windows* 2000 INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by Windows* 2000. 1. Copy the contents of the <INF Extract Directory>\XXXX\Win2000 directory to the root directory of the floppy disk (A:\). Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select Control Panel. 6. Double-click on System icon. 7. Click on Hardware tab. 8. Click on Device Manager button. 9. Select "Devices by connection" under the View menu. 10. Click on MPS Uniprocessor PC -OR- MPS Multiprocessor PC. NOTE: Only one of the above items will be displayed for a given system. 11. Click on PCI bus. 12. Right-click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 13. Select Properties from the pull-down menu. 14. Click on the Driver tab. 15. Click on Update Driver button. 16. Windows* 2000 will launch the Upgrade Device Driver Wizard. Select Next. 17. Ensure that the following choice is selected: Search for a suitable driver for my device (recommended) 18. Insert the floppy containing the Windows* 2000 INF files into the floppy drive. 19. Select Next. 20. Windows* 2000 will list locations from where the updated driver file can be found. Ensure that the following choice is selected: Floppy disk drives 21. Select Next. 22. Windows* 2000 should report that a driver has been found: (The detected device name will be displayed.) Select Next. 23. Select Finish. 24. Restart the system when prompted to do so. ************************************************************ * 9C. INSTALLING THE Windows* 98SE/WINDOWS* * Me INF FILES AFTER OS INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows* 98SE and Windows* Me, so it may not be necessary to use the INF files provided by this software to update these operating systems. The following steps describe the installation process for the Windows* 98 Second Edition and Windows* Me INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by these operating systems. 1. Depending on the operating system you intend to update, copy the contents of one of the following directories to the root directory of the floppy disk (A:\). For Windows* 98SE: <INF Extract Directory>\XXXX\Win98SE For Windows* Me: <INF Extract Directory>\XXXX\WinME Note: XXXX is the directory name for the chipset of interest. See Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select Control Panel. 6. Double click on System icon. 7. Click on Device Manager tab. 8. Click on View Devices by Connection button. 9. Click on Plug and Play BIOS, or Advanced Configuration and Power Interface (ACPI) BIOS. NOTE: Only one of the above items will be displayed for a given system. 10. Click on PCI bus. 11. Click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 12. Click on the Remove button at the bottom of the window. 13. If more than one Intel(R) chipset device needs updating, go to Step 11 to remove more devices. 14. When prompted to restart the system, select Yes. 15. Restart the system. 16. The Windows operating system will launch the Add New Hardware Wizard. Select Next in the dialog box that states: "This wizard searches for new drivers for:" 17. Ensure that the following choice is selected: Search for the best driver for your device (Recommended) 18. Select Next. 19. Insert the floppy containing the .INF files into the floppy drive. 20. Ensure that the following choice is selected: Floppy disk drives 21. If the .INF files are not located in the root directory of the floppy disk, also select the following and enter the path to the .INF files needed to update this operating system: Specify a location: 22. Select Next. 23. The Windows operating system should report that the driver has been found and that it is "now ready to install the best driver for this device." 24. Select Next. 25. Select Finish. 26. The Windows operating system may prompt you to install additional drivers if more than one device was removed during Steps 11 through 13. Follow the same procedure to install the remaining Intel(R) chipset devices. 27. Restart the system when prompted to do so. ************************************************************ * 10. VERIFYING INSTALLATION OF THE SOFTWARE AND IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ The version of the software included in the distribution package can be identified by examining the following registry location: Key name: \\HKEY_LOCAL_MACHINE\Software\Intel\InfInst Value name: version ************************************************************ * 11. TROUBLESHOOTING ************************************************************ It is assumed that the system requirements in Section 2 above have been satisfied. Issue: System locks up during Device Manager Remove or during restart. Solution: System lockup can occur during Restart as a result of several possible system issues. In the event of system lockup, restart the machine and view Device Manager. If devices are listed properly and the system experiences no further problems, then the .INF file restore process was successful. If devices are not configured correctly, try re-running the procedures outlined in Section 3. If this does not fix the issue or further issues are experienced, reinstall the operating system. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find one of the following files: ESDI_506.pdr Solution: Click Browse in the dialog box where this issue occurs, locate the <Windows>\System\IOSubsys directory and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find one of the following files: UHCD.SYS USBD.SYS USBHUB.SYS Solution: Click Browse in the dialog box where this issue occurs, locate the <Windows>\System32\drivers (for Windows* 98SE, Windows* Me) directory, and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find the following file: isapnp.vxd Solution: Click Browse in the dialog box where this issue occurs, locate the <Windows>\System directory, and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: After performing the silent install, the HKLM\Software\Intel\InfInst key was not created or the data of the value "install" is not "success". Solution: This is caused by one of the following scenarios: - The current system does not contain a supported operating system, or - The current system does not contain a supported chipset. Verify the System Requirements in Section 2. ************************************************************ * DISCLAIMER ************************************************************ Intel is making no claims of usability, efficacy or warranty. The Intel(R) SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User) completely defines the licensed use of this software. ************************************************************ Information in this document is provided in connection with Intel(R) products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty relating to sale and/or use of Intel(R) products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel(R) products are not intended for use in medical, life saving, or life-sustaining applications. ************************************************************ Intel Corporation disclaims all warranties and liabilities for the use of this document and the information contained herein, and assumes no responsibility for any errors which may appear in this document, nor does Intel make a commitment to update the information contained herein. Intel reserves the right to make changes to this document at any time, without notice. ************************************************************ ************************************************************ * Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. * Other brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1997-2003Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.