[Identification]
OptionType = VIDEO
[LanguagesSupported]
ENG
[Options]
"VGA" = vga, 4, 640, 480 , "" , ""
"VGA VESA 800x600x4" = vga, 4, 800, 600 , "" , ""
"HTVGA 640x480x4" = ht216_32, 4, 640, 480 , "" , ""
"HTVGA 640x480x8" = ht216_32, 8, 800, 600 , "" , ""
"HTVGA 800x600x4" = ht216_32, 4, 800, 600 , "" , ""
"HTVGA 800x600x8" = ht216_32, 8, 800, 600 , "" , ""
"HTVGA 1024x768x4" = ht216_32, 4, 1024, 768 , "" , ""
"HTVGA 1024x768x8" = ht216_32, 8, 1024, 768 , "" , ""
[MapOfOptions]
"VGA" = "VGA"
"HT216-32 VGA" = "HTVGA 640x480x4"
[MiniportDrivers]
ht216_32 = !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_IGNORE, 9, {vga,vga256}, 1 , %SystemRoot%\System32\IoLogMsg.dll , 7
vga = !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_IGNORE, 10, {vga}, 1 , %SystemRoot%\System32\IoLogMsg.dll , 7
[OptionsTextENG]
"VGA" = "Standard VGA (640x480, 16 colors)"
"VGA VESA 800x600x4" = "VESA VGA 800x600, 16 colors"
"HTVGA 640x480x4" = "Headland HT216-32 VGA 512K 640x480, 16 colors"
"HTVGA 640x480x8" = "Headland HT216-32 VGA 512K 640x480, 256 colors"
"HTVGA 800x600x4" = "Headland HT216-32 VGA 512K 800x600, 16 colors"
"HTVGA 800x600x8" = "Headland HT216-32 VGA 1MB 800x600, 256 colors"
"HTVGA 1024x768x4" = "Headland HT216-32 VGA 1MB 1024x768, 16 colors"
"HTVGA 1024x768x8" = "Headland HT216-32 VGA 1MB 1024x768, 256 colors"
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[MapToSupportedOption]
set Status = STATUS_FAILED
set MappedOption = $($0)
set OptionList = ^(MapOfOptions, 0)
ifcontains $($0) in $(OptionList)
set MappedOption = #(MapOfOptions, $($0), 1)
else
set MappedOption = "VGA"
endif
set Status = STATUS_SUCCESSFUL
Return $(Status) $(MappedOption)
[ServicesEntry]
CurrentEntry = "" ? $(!LIBHANDLE) GetDevicemapValue Video \Device\Video0
[InstallOption]
set Status = STATUS_FAILED
set DrivesToFree = {}
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_InstallOption
endif
set OptionList = ""
set MiniportDriver = #(Options, $(Option), 1)
set BitsPerPel = #(Options, $(Option), 2)
set XResolution = #(Options, $(Option), 3)
set YResolution = #(Options, $(Option), 4)
set VRefresh = #(Options, $(Option), 5)
set Interlaced = #(Options, $(Option), 6)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set InstalledDisplays = #(MiniportDrivers, $(MiniportDriver), 5)
set VgaCompatible = #(MiniportDrivers, $(MiniportDriver), 6)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 7)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 8)
read-syms ServicesEntry
detect ServicesEntry
installtheoption = +
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
ForListDo $(InstalledDisplays)
set FileToCheck = #(Files-DisplayDLLs, $($), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
EndForListDo
addfiles = +
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "VIDEO.INF: User cancelled video installation"
goto finish_InstallOption
else
Debug-Output "VIDEO.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "VIDEO.INF: User cancelled asking source."
goto finish_InstallOption
endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "VIDEO.INF: Adding video files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
set ServiceNode = $(MiniportDriver)
set ServiceBinary = %SystemRoot%\System32\drivers\#(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(!SERVICE_SYSTEM_START) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
set ParametersValues = { +
{InstalledDisplayDrivers, 0, $(!REG_VT_MULTI_SZ), $(InstalledDisplays) }, +
{VgaCompatible, 0, $(!REG_VT_DWORD), $(VgaCompatible) }, +
{DefaultSettings.BitsPerPel, 0, $(!REG_VT_DWORD), $(BitsPerPel) }, +
{DefaultSettings.XResolution, 0, $(!REG_VT_DWORD), $(XResolution) }, +
{DefaultSettings.YResolution, 0, $(!REG_VT_DWORD), $(YResolution) } +
}
ifstr(i) $(VRefresh) != ""
set VRefreshValue = {DefaultSettings.VRefresh, 0, $(!REG_VT_DWORD), $(VRefresh)}
set ParametersValues = >($(ParametersValues), $(VRefreshValue))
endif
ifstr(i) $(Interlaced) != ""
set InterlacedValue = {DefaultSettings.Interlaced, 0, $(!REG_VT_DWORD), $(Interlaced)}
set ParametersValues = >($(ParametersValues), $(InterlacedValue))
endif
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Device0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for video"
goto finish_InstallOption
endif
ifstr(i) $(CurrentEntry) != $(MiniportDriver)
ifstr(i) $(CurrentEntry) != VGA
ifstr(i) $(CurrentEntry) != ""
shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_DISABLED)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't find DisableServicesEntry in registry.inf"
goto errorconfig
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "DisableServices entry failed"
endif
endif
endif
endif
goto configdone
errorconfig = +
ifstr(i) $(CurrentEntry) != $(MiniportDriver)
shell "registry.inf" ModifyServicesEntry $(MiniportDriver) $(!SERVICE_DISABLED)
ifstr(i) $(CurrentEntry) != ""
shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_SYSTEM_START)
endif
endif
goto finish_InstallOption
configdone = +
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
set STF_VITAL = ""
AddSectionKeyFileToCopyList Files-DisplayMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
ForListDo $(InstalledDisplays)
AddSectionKeyFileToCopyList Files-DisplayDLLs +
$($) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)
EndForListDo
exit
[Install-DoCopyOption]
CopyFilesInCopyList
exit
[ProgressCopyENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correctly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "Display"
String2 = "Please enter the full path to the Windows NT Display "+
"driver files. Then choose Continue."
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1" , TAGFILE = disk1
2 = "Windows NT Setup CD-ROM Disk" , TAGFILE = disk2
99 = "LMHOST disk", TAGFILE = lmhosts
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-DisplayDLLs]
framebuf = 2,framebuf.dll , SIZE=42496
vga = 2,vga.dll , SIZE=136192
vga256 = 2,vga256.dll , SIZE=73728
[Files-DisplayMiniportDrivers]
vga = 2,vga.sys , SIZE=25600
ht216_32 = 2,ht216_32.sys , SIZE=33792
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.