Quick Flash Instructions For AMI Motherboards:
(FLASH UTILITY NOT REQUIRED)
- Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).
- Make sure you are using the on board floppy controller.
- With system powered off and diskette with "ROM" file in "A" drive.
- Hold down on the "CTRL & HOME" keys and then power on system.
- There will be no video and notice floppy drive being accessed.
- You should hear 1 beep let go of keys.
- Then you will hear 2 beeps and then 3 beeps.
- System should reset and notice new BIOS release date at top of screen.
- Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.
- Change BIOS SETTINGS for your configuration.
"WARNING"
If you are using the "password" option in the BIOS, you must DISABLE the
Password BEFORE you flashes the BIOS. This BIOS uses a new core and saves the
Password at a different location.
If you flash the BIOS without disabling the password, you may not be able
To get into the setup. If this happens, you must drain the CMOS first.
**November 9, 2000**
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.