How to Flash Update the BIOS for Pacific Digital RAID Controller
------------------------------------------------------------
Create Flash Update Diskette
----------------------------
1. Make a bootable floppy (DOS, WIN95, WIN98, etc.).
2. Copy the flash update program to this floppy.
Flash Update
------------
1. Insert the floppy diskette created in the above process into the floppy drive.
2. Power on the computer and boot from the floppy created by the above process.
3. At the command prompt, run the flash update program.
example: a>22050308.exe
4. Answer "Y" or all questions.
5. The flash process will start. You should see the following characters displayed,
as the flasher progresses:
+*XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
6. DO NOT REBOOT your machine when the board is being flashed.
7. Wait until the phrase "BIOS Successfully Installed" is displayed.
8. The updating process is now completed.
9. Reboot your computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.