Scantools Version 1.04
===============================
Thank you for purchasing Scantools. This readme file contains
information that have not been fully documented elsewhere.
When you have finished reading this file, choose "Exit" from the
File menu to return to Program Manager.
1. A 256-color super VGA or more colors display card is recommended.
It is OK if you are using a 16-color VGA card; however, color
quality of your images may be slightly inferior. Scantools can
compensate for that and display images as well as possible.
2. You can run Scantools under Windows 3.1 or later version.
3. Notes about using TWAIN-compliant scanners:
(a) In old systems, click OK after the scanning is completed will save
the scanned image and transfer it to Windows. The screen
also jumps to Windows screen.
(b) If you click Cancel right after the scanning is completed, the
screen will pop up a dialog box asking if you want to save the image
before quitting.
(c) In the present system, TWAIN source is changed in such a way that
you click OK after the scanning is completed, the system when
saves the scanned image but does NOT exit the current screen display.
(d) Using EXIT instead of Cancel If you choose EXIT right after you
have clicked OK, the screen will promptly jump to Windows.
If the OK button is not clicked or you perform some editing tasks such
as missing line compensation after the OK button is clicked, choosing
EXIT will cause the screen to pop up a dialog box asking if you want to
save. Choose YES if you want to save; otherwise choose NO.
4. Installing Scantools will create/add the following
subdirectories/files onto your hard disk.
\SCANTOOL directory
COMMDLG.DLL
README.TXT
FASPRT.DLL
FASDMONO.DLL
FASD16.DLL
FASD16M.DLL
FASD256.DLL
FASSEL.DLL
FASDLG.DLL
FFORMAT.DLL
SCANTOOL.EXE
SCANTOOL.TIF
SCANTOOL.HLP
SCANTOOL.DLL
FASMISC.DLL
FASCAP.DLL
FASCVT.DLL
FASJPEG.DLL
FASKH30.DLL
FASKH31.DLL
FASDSPMS.DLL
FTWNGLUE.DLL
\SCANTOOL\SETUP directory
SETUP.INF
UPGRADE.EXE
FASMETER.DLL
VER.DLL
LZEXPAND.DLX
ULTIMA ELECTRONICS CORP.
3358 GATEWAY BLVD
FREMONT CA 94358
U.S.A.
TEL: 510-659-1580
FAX: 510-440-1217
9F, NO. 18, ALLEY 1, LANE 768, SEC 4
PA TE ROAD, TAIPEI
TAIWAN, R.O.C.
TEL: 886-2-788-5470
FAX: 886-2-788-5657
WORKSHOP NO. 24 ON 10/F
PACIFIC TRADE CENTRE
2 KAI HING ROAD
KOWLOON BAY, KOWLOON
HONG KONG
TEL: 852-757-8059
852-757-8072
FAX: 852-753-7795
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.