[Identification]
OptionType = SCSI
[LanguagesSupported]
ENG
[Options]
"FCPARIDE" = fcparide
[OptionsTextENG]
"FCPARIDE" = "FREECOM Cable II Parallel - NT"
[MiniportDrivers]
fcparide = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 17, %SystemRoot%\System32\IoLogMsg.dll , 7
;----------
; 1. Identify
;
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;----------
; 2. ReturnOptions:
;
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
; form a list of all the options and another of the text representing
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;----------
; 3. InstallOption:
;
[InstallOption]
set KeyName = "System\CurrentControlSet\Services"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PccKeyHandle
ifstr(i) $(PccKeyHandle) != ""
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\Aspi32" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) == ""
CreateRegKey $(PccKeyHandle) {"Aspi32",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" FCKeyHandle
SetRegValue $(FCKeyHandle) {ErrorControl,0,$(!REG_VT_DWORD),0}
SetRegValue $(FCKeyHandle) {Start,0,$(!REG_VT_DWORD),2}
SetRegValue $(FCKeyHandle) {Type,0,$(!REG_VT_DWORD),1}
CloseRegKey $(FCKeyHandle)
endif
CloseRegKey $(TestKeyHandle)
endif
CloseRegKey $(PccKeyHandle)
; Set default values for
set Status = STATUS_FAILED
set DrivesToFree = {}
; extract parameters
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
; check to see if Option is supported.
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
Debug-Output "SCSI.INF: SCSI option is not supported."
goto finish_InstallOption
endif
set OptionList = ""
; Option has been defined already
set MiniportDriver = #(Options, $(Option), 1)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 5)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 6)
set Start = $(!SERVICE_BOOT_START)
installtheoption = +
; Code to add files to copy list
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "SCSI.INF: User cancelled SCSI installation"
goto finish_InstallOption
else
Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "SCSI.INF: User cancelled asking source."
goto finish_InstallOption
endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "Adding SCSI files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
; first run a privilege check on modifying the setup node
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
; then make a new SCSI entry, the entry is created automatically
; enabled
set ServiceNode = $(MiniportDriver)
set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(Start) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
set ParametersValues = ""
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Parameters
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for SCSI"
goto finish_InstallOption
endif
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
; Add the files to the copy list
AddSectionKeyFileToCopyList Files-ScsiMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
exit
[Install-DoCopyOption]
; Copy files in the copy list
CopyFilesInCopyList
exit
;----------
; 4. DeInstallOption:
;
[DeInstallOption]
set KeyName = "System\CurrentControlSet\Services"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PccKeyHandle
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\Aspi32" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(PccKeyHandle) "Aspi32"
endif
CloseRegKey $(TestKeyHandle)
CloseRegKey $(PccKeyHandle)
; Set default values for
set Status = STATUS_FAILED
; extract parameters
set Option = $($1)
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_DeInstallOption
endif
read-syms Strings$($0)
; check to see if Option is supported.
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_DeInstallOption
endif
set OptionList = ""
; fetch details about option
set MiniportDriver = #(Options, $(Option), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
; check to see if file is installed
; if not give success
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "NO"
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
; this could happen if there is no start value or there is no
; key, in which case the option is not installed
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto do_removal
endif
ifstr(i) $($R1) == "CANCEL"
goto finish_DeInstallOption
endif
endif
do_removal =+
; disable the registry entry
shell "registry.inf" RemoveServicesEntry $(MiniportDriver)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
goto finish_DeInstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "SCSI.INF: Failed to disable services entry"
goto finish_DeInstallOption
endif
; AddFileToDeleteList $(FilePath)
set Status = STATUS_SUCCESSFUL
finish_DeInstallOption =+
return $(Status)
;----------
; 5. GetInstalledOptions:
;
[GetInstalledOptions]
set Status = STATUS_FAILED
set InstalledOptions = {}
set InstalledOptionsText = {}
; Check if the language requested is supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_GetInstalledOptions
endif
set OptionList = ^(Options, 0)
ForListDo $(OptionList)
set MiniportDriver = #(Options, $($), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "YES"
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifint $($ShellCode) == $(!SHELL_CODE_OK)
ifstr(i) $($R0) == STATUS_SUCCESSFUL
ifstr(i) $($R1) != $(!SERVICE_DISABLED)
set OptionText = #(OptionsText$($0), $($), 1)
set InstalledOptions = >($(InstalledOptions), $($))
set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))
endif
endif
endif
endif
EndForListDo
set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
Return $(Status) $(InstalledOptions) $(InstalledOptionsText)
;**********
; PROGRESS GUAGE VARIABLES
;
[ProgressCopyENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "SCSI Adapter"
String2 = "Please enter the full path to the FREECOM Cable II Parallel - NT 4.0"+
"files. Then choose Continue."
String3 = "The SCSI Adapter has been marked as a boot device. Removing "+
"it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
"you want to remove the Adapter."
[Source Media Descriptions]
1 = "Freecom Software for Cable II Parallel - NT 4.0" , TAGFILE = disk1
[Files-ScsiMiniportDrivers]
fcparide = 1,fcparide.sys
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.