1. wpg2000_20030620.exe Driver
2. Releasenote_utility.txt File Contents

Releasenote_utility.txt Driver File Contents (wpg2000_20030620.exe)

=====================================================================
					Limitation of XG300UTL
=====================================================================
1. The driver is not very stable on some Notebook without safety 
remove.

2. 802.11d function hasn't been supported by driver 1.0.5.2 yet.

3. Auto Rate

4. Couldn't ping big package.

5. When Set OID, driver 1.0.6.3 always return bytesread =4, so we 
couldn't ensure whether these OID has been set successfully.
OID List:
	OID_SET_RATE
	OID_802_11_SSID
	OID_802_11_POWER_MODE
	OID_802_11_REMOVE_WEP
	OID_802_11_ADD_WEP
	and others InformationBufferLength!=4 OIDs.

6. Driver 1.0.6.3 read SSID from Registry panic, when the SSID is 
UNICODE like.

7. If PC comes in Power save mode, and after wake up about one minute, 
PC will halt.

=====================================================================
					Release Note of XG300UTL
=====================================================================
/********************************************************************
*	2003-05-08	  Label as "1.1.0.2"				Ver: 1.1.0.2
********************************************************************/
1.	(Bug Fixed) If user check WEP and input Key, set those parameter to
	NIC, Then uncheck WEP, can't connect to the specified network(No WEP)

/********************************************************************
*	2003-05-08	  Label as "1.1.0.1"				Ver: 1.1.0.1
********************************************************************/
1.	(Bug Fixed) User input "Any" SSID edit box, NIC can connect any 
	Network.

2.	(Improvement) Driver version and Utility version always show as
	xx.xx.xx, Doesn't show xx.xx.xx.xx

/********************************************************************
*	2003-03-26	  Label as "1.0.0.9"		Ver: 1.0.0.9
********************************************************************/

1. (Driver/Firmware Upgrade) Driver is 1.0.8.11. Firmware is 0.9.0.1.

2. (Improvement) Check IsAdapterRegistered() is not required in the 
function CNICIOControl::MacOpen(), when OS is not Win98 or WinMe.

3. (Bug Fixed) Check NDIS_WLAN_BSSID.Length when Get BSS(AP) List.

/********************************************************************
*	2003-03-04	  Label as "1.0.0.8"		Ver: 1.0.0.8
********************************************************************/
1. (Bug Fixed) On Site Survey, if select an Available BSS description,
then double-click on the empty row, utility will join previous 
selected BSS.

2. (Bug Fixed) If not input key and click OK directly in WEP dialog.
it will pop a Messagebox. But the message box is still shown after 
NIC removed.

3. (Improvement) Get Channel List from Driver and gives a matched
Regulator Domain ID according this Channel List.

4. (Improvement) In old version, tray icon blinked. Now it's improved.

5. (Bug Fixed) On Win9x, Utility window is not always on top.

6. (Improvement) On WinXP, when start this utility, let Zero
Configuration stop service for the NIC.

/********************************************************************
*	2003-02-12	  Label as "1.0.0.7"		Ver: 1.0.0.7
********************************************************************/
1. (Driver/Firmware Upgrade) Driver is 1.0.6.3. Firmware is 0.8.0.0.

2. (Driver Bug Fixed) Driver 1.0.5.2 is not suitable for NetBEUI 
protocol on Win98 and Win Me. (Cause blue-screen)

3. (Bug Fixed) After utility run, it doesn't display last applied 
profile.

4. (Bug Fixed) When apply a profile, it doesn't save it at same time.

5. (Bug fixed) Not input any key and click OK directly in WEP dialog.
Utility pop a Message box. The box is still shown after removing card.


/********************************************************************
*	2003-01-31	  Label as "1.0.0.6"		Ver: 1.0.0.6
********************************************************************/
1. (Improvement) Filter Hide AP from Available BSS description.

2. (Bug Fixed) On Win98 and Win Me, if utility is running, plug-out 
NIC then plug-in, the IP setting will be lost. Even it will cause 
Blue-screen, if the NIC is not plug-in when start systems.

3. (Bug Fixed) When load the default setting or current setting, the
Power save and privacy setting is not correct.

4. (Improvement) If there is no adapter active, show an additional
tray icon, let user can close utility.

5. (Bug Fixed) After apply an Ad-hoc setting, then disable and enable
NIC, the Ad-hoc channel will be replace with Channel 1(default).

6. (Driver Improvement) Modify inf of Driver, remove needless file
PrismIOC.vxd, and specify 2.4GHz band always.

7. (Driver Improvement) Modify inf of Driver, add value 
"RegulatorDomain" for utility to specify which channel can be used. 
(Because 802.11d is not supported by driver 1.0.5.2)

8. (Improvement) Sort profile by apply time.

/********************************************************************
*	2003-01-22	  Label as "1.0.0.5"		Ver: 1.0.0.5
********************************************************************/
1. (Bug Fixed) If a profile named "Forrest" and another name 
"forrest", then the profile "Forrest" couldn't be selected.

2. (Bug Fixed) If "Quick Launch" specified "Maximized Window", the 
MDI window will be shown.

3. (Improvement) Filter the Ad-hoc BSS description, which has the
same SSID and channel. Only keep the youngest one.

4. (Bug Fixed) If user log off without close utility, the profile
setting is not saved.

5. (Improvement) Add "auto input" function for profile ComboBox.

6. (Modify) Profile list no longer sorts by ASCII. Now sort with 
creation time.

/********************************************************************
*	2003-01-20	  Label as "1.0.0.4"		Ver: 1.0.0.4
********************************************************************/
1. The driver is 1.0.5.2 and the firmware is 0.7.3.0

2. (Modify) Always popup the encryption dialog to ensure keys, when 
user join an encrypted BSS.

3. (Modify) Modify FindBSS(NDIS_802_11_MAC_ADDRESS &rMacAddress) to  
prevent Available Network list duplication.

4. (Bug Fixed) Disable double click function on Page Site Survey
when Zero configuration is enabled.

5. (Bug Fixed) Fix the channel list from 1-13 not previous 1-14 for 
Europe Domain. And add code to filter invalid channel BSS list. 
This is the temporary solution, since Instersil didn't provide the
correct channel list.

/********************************************************************
*	2003-01-18	  Label as "1.0.0.3"		Ver: 1.0.0.3
********************************************************************/
1. (Bug Fixed) Fixed Service Name error for Win9x.

/********************************************************************
*	2003-01-16	  Label as "1.0.0.2"		Ver: 1.0.0.2
********************************************************************/
1. First release of Sitecom Utility.

2. The driver is 1.0.5.2 and firmware is 0.7.2.0

3. It includes Configuration, Site Survey and About Page.

4. It supports Win98SE, Win ME, Win2K and Win XP.

5. Each user maintains its own profiles.

6. Each NIC owner its utility instance (needn't select NIC).

7. No longer read SSID "Any" (or "aNy") as empty SSID.