#################################################### ### Installation Instructions for USB and PCMCIA ### #################################################### Due to changes to Drivers and to Setup procedure, it is recommented to uninstall first the old drivers and the old application. Then run the new setup to install the current set of application/drivers. 1. The Driver and Utility package come with an integrated install shield. Run the setup for your driver by double-clicking it. 2. Select next, read the license and select "I Agree" if you agree with the terms of the license. Then select the destination volume that you want to install the driver and finally select install. The Driver will be installed in the usual path (/System/Library/Extensions/). 3. After restarting your macintosh run the setup for the WatlanX application following the same procedure as above. The WatlanX application will be installed at your Application Folder. 4. Plug in the device. 5. From the dock (usually located at the bottom of your screen) click the System Preferences icon. From there select Network. 6. A dialog will appear telling you that a "New Port Detected". Here you will also see the name of this port(e.g en1 or en2 etc). Click the OK button and configure it as you like. Click the "Apply Now" button. 7. Double click the file WatlanX and use it to configure your wireless adapter. *** NOTE *** It is advised to add the WatlanX configuration utility to the startup items to be able to keep your current connection settings after reboot or shutdown. You can easily do this from System Preferences -> Login Items under 10.1 and 10.2 and from System Preferences -> Accounts -> Startup Items under 10.3. Click "Add..." button and select the WatlanX from /Applications folder. Check if you want to hide the utility or not and the next time you'll login to the system the WatlanX will start automatically. *** NOTE *** There are some devices that upon startup of the system they haven't initialize the various hardware components yet and the driver can't load (only during startup). In that case(you'll see that the WatlaX utility is not active) just uplug and plug the device again.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.