README.TXT Driver File Contents (MD010C.zip)

CardBus Ethernet Card Installation on Linux
1. If you are using RedHat 7.0, you must download the new rpm at http://www.rpmfind.net to replace the old pcmcia-cs-3.1.19 to
pcmcia-cs-3.1.24-1.i586.rpm..rpm, which can be found at "RedHat_7.0/sourcecode/" 

To unzip: "rpm -ivh pcmcia-cs-3.1.24-1.i586.rpm..rpm"


2. Compile the source code 
copy the source code rtl8139.c and kern_compat.h pci-scan.h  to a directory .
and exectue "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c -I/usr/src/linux/include rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include/"
This will create a realtek_cb.o file
Note: When copying the source code rtl8139.c and kern_compath.h pci-scan.h  to a directory in Linux, please make sure the file names stay as kern_compath.h.


or run "\. make.bat"---> make.bat = "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c -I/usr/src/linux/include rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include/"
This will create a realtek_cb.o file

3. Copy driver :
-->copy the file "realtek_cb.o" to "lib/module/2.2.16-22/pcmcia"

4.Edit config:
-->Add the following 5 lines to the file "/etc/pcmcia/config"

#
# Device driver definitions
#

drvice "realtek_cb"
   class "network" module "cb_enabler", "realtek_cb"


:
:

#
# CardBus Cards
#

card "10/100 CardBus Card"
  manfid 0x0000, 0x021b
  bind "realtek_cb"


The value 0x0000, 0x021b can be read by typing 
"cardctl ident" on console with one card socket
 
5.Restart the computer
"/etc/rc.d/init.d/pcmcia restart"

6. More information about kernel compile:
http://metalab.unc.edu/mdw/HOWTO/Kernel-HOWTO.html
   More information about install: man pcmcia
  
http://www.rpmfind.net


	 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.97