Release Notes for CS4232/36/36B/37B/38B Version 1.80 Windows 3.1 Driver Release Date: 02/14/97 Release Information: This release improves 3D audio support by adding 3D to the analog inputs. It also improves the chip detection routines for the CS423xB family of audio codecs. There is a new DOS diagnostic and DOS CD player. The DOS driver (CS4232C.EXE) now loads CS4236B, CS4237B and CS4238B RAM patches. Version Numbers: 2.01 T3 CS4232C.EXE 4.03.2000 CSFM.DRV 1.80 CS32BA11.DRV 1.80 CS32BAIP.EXE 1.80 CS32BAOP.EXE 2.00 CS32BASP.EXE 2.11 CSACBAT1.EXE 1.80 CS32MIX.EXE 1.80 CS32CFG.EXE 1.80 CS32HMX.EXE 1.80 CS32WSS.EXE 1.80 CS32INTR.EXE 1.80 CWDIAG.EXE 1.80 CSACGUCD.EXE 1.80 CSPOWER.CPL 1.0 CW3DCTRL.EXE 79 CS4232 Microcode 6 CS4232A Microcode 55 CS4236 Microcode 14 CS4236B\37B\38B Microcode List of Files: Disk 1 LOGO.BMP 11,062 09-08-95 1:31a SETUP.INS 85,859 02-07-97 7:14p SETUP.DLL 6,224 09-08-95 1:31a SETUP.EXE 47,616 01-22-96 4:59a SETUP.INF 4,607 02-13-97 3:26p CSGROUP.EXE 22,016 09-08-95 1:31a RESOURCE.DLL 6,400 02-13-97 8:23p WINCM.DLL 8,192 09-08-95 2:10a DISK1.ID 51 09-08-95 1:31a CWPNP.DLL 20,128 03-20-96 10:57p CWAUDIO.BIN 8,225 01-21-97 10:33a CS4232.INI 853 09-08-95 1:30a _INST16.EX_ 276,270 01-24-96 1:19p _ISDEL.EXE 8,192 09-07-95 7:22p _SETUP.DLL 10,752 09-26-95 12:33a _SETUP.LIB 28,217 01-22-96 8:59p R180D1.Z 526,142 02-14-97 3:24p BWCC.DLL 157,472 04-20-94 12:00a COMPRESSED IN R180D1.Z CSACBAT1.INI 320 09-08-95 1:31a COMPRESSED IN R180D1.Z CS32BASP.EXE 312,868 09-08-95 1:31a COMPRESSED IN R180D1.Z CS32BAOP.EXE 42,800 02-12-97 6:46p COMPRESSED IN R180D1.Z CSFM.DRV 21,856 02-14-97 3:18p COMPRESSED IN R180D1.Z CS32BA11.DRV 112,560 02-12-97 6:43p COMPRESSED IN R180D1.Z MIDIMAP.CFG 38,386 09-08-95 1:30a COMPRESSED IN R180D1.Z MPU401.DRV 7,088 11-01-93 11:11a COMPRESSED IN R180D1.Z OEMSETUP.INF 252 09-08-95 1:31a COMPRESSED IN R180D1.Z VSNDSYS.386 75,357 02-13-97 7:59p COMPRESSED IN R180D1.Z CS32BA11.INI 5,138 02-12-96 1:31a COMPRESSED IN R180D1.Z CSWAVE.DLL 15,408 12-13-95 1:31a COMPRESSED IN R180D1.Z CS32BAIP.EXE 76,336 02-12-97 6:45p COMPRESSED IN R180D1.Z CSACBAT1.EXE 73,904 01-09-96 2:11a COMPRESSED IN R180D1.Z Disk 2 DISK2.ID 51 09-08-95 1:30a R180D2.Z 1,068,549 02-14-97 3:24p DIALOG.FON 48,624 10-18-93 12:00a COMPRESSED IN R180D2.Z CS32CFG.EXE 689,967 02-12-97 7:45p COMPRESSED IN R180D2.Z CWDIAG.EXE 135,816 02-13-97 3:33p COMPRESSED IN R180D2.Z DISK2.ID 51 09-08-95 1:30a COMPRESSED IN R180D2.Z CS32HMX.EXE 30,751 02-12-97 7:46p COMPRESSED IN R180D2.Z CS32INTR.EXE 166,472 02-14-97 11:10a COMPRESSED IN R180D2.Z CS32MIX.EXE 234,906 02-14-97 11:05a COMPRESSED IN R180D2.Z CS32WSS.EXE 33,791 02-12-97 6:57p COMPRESSED IN R180D2.Z CS4232C.EXE 94,864 02-10-97 2:49p COMPRESSED IN R180D2.Z CSACGUCD.EXE 194,214 02-12-97 7:47p COMPRESSED IN R180D2.Z SOUNDTST.WAV 36,544 09-08-95 1:30a COMPRESSED IN R180D2.Z TEST.DAT 7,826 09-08-95 1:30a COMPRESSED IN R180D2.Z MSMIXMGR.DLL 12,688 10-18-93 2:00a COMPRESSED IN R180D2.Z CSPOWER.CPL 7,216 02-12-97 6:47p COMPRESSED IN R180D2.Z THREED.VBX 64,432 07-11-95 9:50a COMPRESSED IN R180D2.Z CW3DCTRL.EXE 36,859 02-12-97 6:55p COMPRESSED IN R180D2.Z CW3DW31.EXE 129,504 02-12-97 7:21p COMPRESSED IN R180D2.Z File Summary: SETUP.EXE CrystalWare Windows 3.1 Installation Program. It will install the necessary files, install the drivers, modify CONFIG.SYS and AUTOEXEC.BAT, backup important files, and over install existing Crystal drivers. SETUP.INF Script file used by SETUP.EXE for installations. SETUP.INS File used by SETUP.EXE for installations. SETUP.DLL File used by SETUP.EXE for installations. _INST16.EX_ File used by SETUP.EXE for installations _ISDEL.EXE File used by SETUP.EXE for installations _SETUP.DLL File used by SETUP.EXE for installations _SETUP.LIB File used by SETUP.EXE for installations LOGO.BMP File used by SETUP.EXE for installations. WINCM.DLL File used by SETUP.EXE for installations. CSGROUP.EXE Installation program used when over installing existing Crystal drivers. RESOURCE.DLL File used by SETUP.EXE for installations. CWPNP.DLL File used by SETUP.EXE for installations. Used to detect the PnP configuration of the host machine as a PnP, Configuration Manager, or override PnP configuration. DISK1.ID Disk 1 ID used by SETUP.EXE. R180D1.Z Compressed archive of disk 1 that is uncompressed at installation time. BWCC.DLL Borland Dialog DLL required by CrystalWare mixer panels. CS32BA11.DRV Windows 3.1 wave, aux, and mixer driver. CS32BA11.INI File used by CS32BA11.DRV to save configuration and feature information. VSNDSYS.386 Windows 3.1 virtual device driver. CS32BAIP.EXE Windows 3.1 Input Panel. CS32BAOP.EXE Windows 3.1 Mixer Panel. CS32BASP.EXE Windows 3.1 Splash Panel. CSACBAT1.EXE Windows 3.1 Business Audio Transport. A sound recorder that supports multi-instances, OLE linking and embedding, and direct to disk recording. CSACBAT1.INI File used by CSACBAT1.EXE to save configuration and customization information. CSWAVE.DLL File used by CSACBAT1.EXE. MIDIMAP.CFG MIDIMAP Configuration that contains preconfigured midimaps for the Crystal FM driver and the MPU-401 driver. MPU401.DRV Windows 3.1 MPU-401 MIDI Driver. OEMSETUP.INF Windows install file for CSFM and MPU-401 MIDI driver. CSFM.DRV Crystal FM MIDI driver. CSPOWER.CPL Crystal Power Control Panel. This Control Panel icon provides a way to do idle time-out for machines with Advanced Power Management. After a set amount of time, the driver will power down parts of the chip to save power. MSMIXMGR.DLL Windows 3.1 multimedia support file that provides enhanced mixer functionality for the Crystal Windows 3.1 driver. DISK2.ID Disk 2 ID used by SETUP.EXE. R180D2.Z Compressed archive of disk 2 that is uncompressed at installation time. CS32CFG.EXE CS4232 DOS Configuration Program. This GUI program will allow the user to adjust the configuration settings for a CS4232 card on a non-PnP system or on a system that has PnP overridden. It will also report back the configuration information for PnP configured systems. CS32HMX.EXE CS4232 DOS Hot Key Mixer TSR. This program will load a TSR which allows the user to adjust the Wave, FM, and Master Volume for the Sound Blaster settings. This program supports early games that do not have volume adjustment in the game. CS32INTR.EXE CS4232/CS4236/CS4236B/CS4237B/CS4238B Integrator program. This program will launch the following other programs: CS32MIX, CSACGUCD, and CWDIAG. CS32MIX.EXE DOS mixer used to set or adjust Sound Blaster mixer settings. It will run as a GUI application or as a command line utility. CSACGUCD.EXE DOS CD Player utility. The program plays audio CDs through an installed CDROM, allowing rewind, fast forward, skip, and eject functions. Requires MSCDEX to be loaded. CWDIAG.EXE CS4232/36/36B/37B/38B DOS Diagnostics program. This program tests the CS4232/CS4236 card in the following areas: codec, Sound Blaster, FM, MPU-401, and joystick. DIALOG.FON Provides the fonts for CWDIAG.EXE. SOUNDTST.WAV CWDIAG WAV file used in codec tests. TEST.DAT CWDIAG data file used in the Synth playback test. CS4232C.EXE CS4232/36/36B/37B/38B Configuration Program. A DOS device driver used to initialize and configure the card. It runs in CONFIG.SYS or on a command line. CS4232.INI Default initialization parameters for CS4232C.EXE. CS32WSS.EXE CS4232 WSS Initialization. Run this program after certain Sound Blaster DOS games, to setup and initialize the WSS codec. CWAUDIO.BIN Data file containing Microcode for the CS4232, CS4232A, CS4236, CS4236B, CS4237B and CS4238B. It is used by CS4232C.EXE. CW3DCTRL.EXE CS4237B/CS4238B DOS 3D command-line mixer used to enable, disable, and set mixer values for 3d audio. CW3DW31.EXE CS4237B/CS4238B Windows 3.1 applet used to enable, disable, and set mixer values for 3d audio. General Information: Installation Steps: 1. Enter Win3.1. 2. Run "setup" under the directory of "D:\AUDIO\WIN31". (assume that D: is your CD-ROM Drive) 3. The setup program automatically uncompress the files and modify your autoexec.bat & config.sys. 4. Win3.1 will reboot the system after installation. 5. When the system is booted to DOS prompt, the driver has successfully installed for DOS and Win3.1 environment. 3D Audio in DOS Use the 3d Audio DOS mixer, CW3DCTRL, to enable 3D audio in DOS. Type CW3DCTRL /ON to enable 3d Audio. Type CW3DCTRL /? to get a usage statement on additional CW3DCTRL commands. The ability to 3D enhance analog inputs is lost while recording or while the VU Meter is on. 3D Audio Limitations The 3D audio does not currently support selecting Loop as an input with 3D enabled. Selecting the input "Loop" in the Business Audio Input will automatically disable 3D. Installing from the Hard Drive: When installing the software from the hard drive instead of using floppies, all of the files from the install disks must be copied to a single directory. SETUP can then be run from there. Driver Version Checking: The Windows driver, VxD, and FM driver must have the same internal version number in order to work. The driver has version checking code for the various pieces. New Files This release has two new files. CWDIAG.EXE to replace CW32DIAG.EXE and DIALOG.FON to support CWDIAG.EXE. Release Notes 1.80 Crystal Semiconductor ConfidentiDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.