=========================================================
Tiger Jet PCI ISDN-U Window NT 4.0 Installation Procedure
=========================================================
(c) Copyright Tiger Jet Network Inc., 1996
-------------------
GENERAL INFORMATION
-------------------
This document describe the software setup procedure for installation
Tiger Jet PCI ISDN Modem in the Window NT 4.0 X86 system. For the
hardware installation procedure, please refer to the user manual.
-----------
PREPARATION
-----------
Before you install, make sure you have the following:
1. Tiger Jet PCI ISDN-U Modem.
2. An ISDN line installed.
3. Your switch type, SPIDs, and phone numbers from your telephone
company.
4. A PC with Microsoft Windows NT 4.0 installed.
----------------------
INSTALLATION PROCEDURE
----------------------
1. Go to "Control Panel", select "network".
2. If you do not have NT network installed, follow the setup wizard
for the NT network setup.
3. Select "Adapter", then select "Add".
4. Do not use "Detect" command. Use "Select from the list" and select
"Have Disk".
5. Put the diskette labeled "Tiger Jet ISDN-U installation diskette"
into the floppy disk drive and type in the driver name.A:\WINT40
6. Select "Tiger Jet Network ISDN-U Adapter". The Windows will copy the
files from the diskette and open a dialog windows for the ISDN line
information.
7. Select the proper switching type, or use "automatic" let the driver
to the auto detection. Also type in the dialing numbers and the SPIDs.
For most of the ISDN line ordered, you should have 2 sets of number.
Type them in the box then select "OK". If you have only one number,
just type in the number on the first set of the number, leave the
second one blank.
8. If you do not have the service "Remote Access Service" installed. The
Window will start to install the "Remote Access Service". Place the
NT installation CD into the CD ROM and type in the path for it. The
setup program will copy the file to install the service.
9. If the "Remote Access Service" is installed, the setup will involve
the "Remote Access Service" configuration. Select "TJISDN" for the
"RAS Capable Devices". There will have two "ISDN" port available.
Select both ISDN ports and you need to select the "Network" to
configure the network protocol which will be used for your network
application.
10. Select "Close" to finish the "Remote Access Service" setup and reboot
the system.
11. Configure the "Dial-Up Networking" to use the "TJISDN" port for the
dialing out. If you need to make 128K connection, select "All
available ISDN lines multi-linked".
12. You need to setup the "Server" inside the "Dial-Up Networking" for
the correct network connection. Now you are ready to use Tiger Jet
ISDN for the ISDN connection.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.