Contents:
Section A) TigerJet ISDN Modem installation procedure:
Section B) How to confirm the installation completed (optional):
Section C) How to re-install the driver (for any reason):
Section D) How to setup the Dial-Up Networking:
Section E) How to setup the ML-PPP (128KBPS call):
Section F) How to re-configure your ISDN line(change Phone or SPID number):
Section G) How to configure your PC to be a Dial-Up Server:
Section H) Release Notes ver1.0:
______________________________________________________________
A) TigerJet ISDN Modem installation procedure:
1) Plug the TigerJet ISDN Modem in:
After you run tjsetup.exe, power down the PC,
and plug the TigerJet ISDN Modem in.
2) Follow the Windows 98 prompts:
After plugging the TigerJet ISDN Modem into your PC,
power up your PC. Since the TigerJet ISDN Modem is
Plug and Play, the Windows 98 will automatically find the
hardware and ask for the install disk. Insert the install
disk and complete the installation process as prompted by
Windows 98.
During the installation, you only need to type in Phone #
and SPID #. You should have received two phone # from
telephone company when they installed your ISDN line. Set switch
type to Automatic unless tech support asks you to select a
particular switch type.
3) Reboot the system and your TigerJet ISDN Modem is ready to be used.
________________________________________________________________
_
B) How to confirm the installation completed (optional):
1) In the Windows 98 Control Panel, double-click the System icon.
2) From the Device Manager tab in the System window, double-click
the Network Adapters. If you see the "TJ Network 128k ISDN ..."
list under Network Adapters and without a yellow "!" sign in
front of it, your installation is successful and you are ready
to make calls using your TigerJet ISDN Modem. For any reason, the
installation is not successful, follow Section C procedure to
re-install the driver.
________________________________________________________________
____
C) How to re-install the driver (for any reason):
1) In the Windows 98 Control Panel, double-click the System icon.
2) From the Device Manager tab in the System window, double-click
the "Network Adapters". Select "TJ Network 128k ISDN ..." and click
"Remove".
3) If you find "PCI Network Controller" under "Other devices", select and
Remove it also.
4) In C:\Windows\inf directory, del tjisdn.inf if present.
5) Follows the procedure in Section A to re-install the driver.
________________________________________________________________
______
D) To setup the Dial-Up Networking:
Go into "My Computer", then "Dial-Up Networking" and click on
"Make New Connection" to assign a name, modem type (TJISDN-Line0),
and phone number. You are ready to dial out.
________________________________________________________________
____
E) To setup the ML-PPP (128KBPS call):
Go into "My Computer", then "Dial-Up Networking", then click on
"your phone icon" , and then click on "File",
then click on "Properties", then click on "Settings". Select
"Use Additional Devices", then click on "Add", then select
"TJISDN-Line1". You are ready to make a 2B call.
________________________________________________________________
___
F) To re-configure your ISDN line(change Phone number):
After the installation, if you want to re-configure your ISDN line
(change your phone or SPID number),
click "Start", then "Programs", then "Accessories", then "ISDN Tools",
then "ISDN Configuration Wizard" and then follow the instructions to
reconfigure your ISDN line.
________________________________________________________________
____
G) To configure your PC to be a Dial-Up Server:
In Dial-Up Networking, Click "Connections", and then click
"Dial-Up Server". Select "TJISDN-Line1" and Click "Allow caller access".
Your ISDN line1 is ready for incoming call.
________________________________________________________________
___
________________________________________________________________
_______
If you have any questions, please contact your dealer or e-mail to
support@tigerjet.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.