// // Release.txt // --------------------------------------------------------- 2001-11-05 v.1.0,0,2 1. Fix suspend problem by modifying ca500cam.c. 2. Change directshow extension DLL to dsext561.ax. 3. Modify INF file and change to spca561.inf,spca561.sys. 4. Currently, TWAIN driver is not ready. --------------------------------------------------------- 2001-12-12 v.1.0,0,3 1. spca561.sys: add I420 format. 2. dsext561.ax: modify UI 3. spca561.inf: set default ae type = 60Hz 4. Currently, TWAIN driver is not ready. --------------------------------------------------------- 2001-12-27 v.1.0,0,4 1. spca561.sys: remove I420 format, and add sensor POWER control. Mark hwsnap polling. 2. TWAIN driver is ready. s/w snap and h/w snap is ok. --------------------------------------------------------- 2002-01-09 v.1.0,0,5 1. spca561.sys: add EEPROM function, and MP function. 2. dsext561.ax: add EEPROM function. 3. spca561.inf: add SensorType option. --------------------------------------------------------- 2002-01-31 v.1.0,0,6 1. spca561.sys: Add raw data mode. (Set sensor type =2 in the INF file) 2. spca561.inf: add I420 mode. 3. tw561a.ds: modify TWAIN about the snap function. --------------------------------------------------------- 2002-02-25 v.1.0,0,7 1. Spca561.sys: add raw data snap function. 2. dshow561.ax: fix property page disappear bug. --------------------------------------------------------- 2002-03-05 v.1.0,0,8 1. spca561.sys: fix AE, and bad pixel problem. --------------------------------------------------------- 2002-03-18 v.1.0,0,9 1. spca561.sys: fix snap problem when video is not playing. 2. dsext561.ax: add VideoProAmp page. 3. spca561.inf: For WinXP Logo issue. --------------------------------------------------------- 2002-03-18 v.1.0.1.0 1. spca561.sys: open R,Gr,B,Gb offset/Gain value in INF file 2. spca561.inf: open R,Gr,B,Gb offset/Gain value in INF file --------------------------------------------------------- 2002-04-16 v.1.0.1.1 1. Modify the CustomProperty GUID as the same with SPCA508A. 2. Modify the snap mechanism as SPCA508A 3. Modify TWAIN driver. --------------------------------------------------------- 2002-04-25 v.1.0.1.2 1. spca561.sys: Fix MP raw data mode problem. --------------------------------------------------------- 2002-05-21 v.1.0.1.4 (Internal Test) 1. spca561.sys: fix Amcap un-plug and AE over exposure problem. 2. dshow508.ax: add high light check box. 3. spca561.inf: add registry key "AEMethod" --------------------------------------------------------- 2002-05-22 v.1.0.1.4 1. spca561.sys : fix AE unstable problem. 2. spca561.inf: modify INF file. --------------------------------------------------------- 2002-05-25 v.1.0.1.5 1. spca561.sys: modify Ic2 address 3,6, and reg865c for raw data mode. --------------------------------------------------------- 2002-05-27 v.1.0.1.6 1. spca561.sys: fix Hardwrae snap problem. --------------------------------------------------------- 2002-05-31 v.1.0.1.7 1.spca561.sys: modify AE for image quality --------------------------------------------------------- 2002-06-04 v.1.0.1.8 1.spca561.sys: fix AE unstable issue. --------------------------------------------------------- 2002-06-05 v.1.0.1.9 1.spca561.sys: Modify AE start point. Set default format:RGB24:320x240. --------------------------------------------------------- 2002-06-21 v.1.0.2.0 1.spca561.sys: add outdoor mode. Change AE target. 2.dshow508.ax: change AE type. Remove High light box. --------------------------------------------------------- 2002-06-26 v.1.0.2.1 1.spca561.sys: modify AE low light. --------------------------------------------------------- 2002-07-02 v.1.0.2.2 1.spca561.sys: decrease pixel clock in low light. --------------------------------------------------------- 2002-07-03 v.1.0.2.3 1.spca561.sys: add VGA mode --------------------------------------------------------- 2002-07-09 v.1.0.2.5 1. spca561.sys: Fix YahooMessager and I420 :320x240, 352x288 problem. --------------------------------------------------------- 2002-07-16 v.1.0.2.6 1. spca561.sys: Fix AE unstable in linear shutter, add Illuminate Type. 2. dshow508.ax: add IlluminateType about R,B slider. 3. spca561.inf: add IlluminateType. (High word=B, Low word=R) 4. Set default format=RGB24:352x288. 5. Modify Gamma table. --------------------------------------------------------- 2002-07-19 v.1.0.2.7 1. spca561.sys: add Vertical Flip/Horizontal mirror function. 2. sp561.inf: add 'DisplayMode" entry. --------------------------------------------------------- 2002-07-30 v.1.0.2.8 1. spca561.sys: save raw data in SensorType=2, and using ap561.exe. --------------------------------------------------------- 2002-08-14 v.1.0.3.0 --------------------------------------------------------- 1. spca561.sys: a. add "MiniGain" in Registry. AE will set the minigain. =>The value:0:2.5x, 1:2x, 2:1.5x b. check EEPROM if exist. driver will check the address 0 value. c. User can adjust Gamma. d. User can adjust saturation. 2. spca561.inf a. add "MiniGain" entry. b. add "VID" entry. c. set sensor type=1(always has EEPROM) --------------------------------------------------------- 2002-08-20 v.1.0.3.1 --------------------------------------------------------- 1. spca561.sys : a. set Saturation Range=0~2. Default=1. b. Fix AE problem (It happens when AE is at the Stop mode && the first run) c. Decrease OB function frequence. 2. spca561.inf: a. Add "PrvAE" Key.=>It must be the same as "EnableAE".Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.