Wearnes CDD-110.ZIP/CD_HELP.TXT Driver File Contents (WearnesBeethovenADSP-16.ZIP)

Driver Package File Name: WearnesBeethovenADSP-16.ZIP
File Size: 2.2 MB

Wearnes CD-ROM Installation Help File
=====================================


1.1     INSTALLATION PATHNAME
-----------------------------
The user has to type in the full installation path of the
CD-ROM Device Driver, CDD.SYS and others supporting files.
The default installation path setting is C:\CDD. The user
can change the default path to any path for installation.
(Default: C:\CDD)


1.2     MSCDEX.EXE CD-ROM EXTENSION
-----------------------------------
For DOS Version 6's user, MSCDEX.EXE Version 2.22 already
provided in the DOS directory. The program will copy the
MSCDEX.EXE from the C:\DOS sub-directory to the C:\CDD
[Assumming default directory: C:\CDD]. The MSCDEX.EXE
included in the disk is Version 2.21.
(Default: C:\CDD)


1.2     PORT ADDRESS OF THE CD-ROM'S INTERFACE CARD
---------------------------------------------------
The user can specify the port address for the interface
card.  The address selected has to be same is the jumper
setting(JP8) on the CDC-005/6 interface card.  If the user
is using a sound card instead of the CDC-005/6, the CD-ROM
address setting for the sound card driver has to be the same
as the selected one. The port address available are 300,
320, 330, 340 and 360.  
(Default: 320)


1.3     DATA TRANSFER MODE
--------------------------
The type of data transfer mode can be specified during
installation.  The several mode available are Programmed
I/O, DMA Channel 0,1,2,3,5, 6,7. The data transfer mode
selected has to be same as the jumpers(JP5 & JP6) on the
interface card, CDC-005/6. For Programmed I/O, no jumper
setting is needed.  
(Default: Programmed I/O)


1.4     INTERRUPT SETTING
-------------------------
The interrupt setting can be selected in the installation
menu. The interrupt selection has to match the jumper
setting at JP7 on the interface card, CDC-005/6. The
interrupt available are none, 3, 4, 5, 6, 7, 9, 10 & 11. For
None, no jumper setting is needed. 
(Default: None)


1.5     VERBOSE MODE FOR THE CDD.SYS DRIVER
-------------------------------------------
This verbose mode can be turn on and off. Turning on the
mode will display information about the installation.
(Default: OFF)


1.6     CD-ROM DRIVE LETTER
---------------------------
A nearest unused drive letter will be used as the CD-ROM
drive letter.


NOTE: For any further informations, please refer to the
CD-ROM User's Menu.

server: web5, load: 1.25