1. Mpin3.zip Driver
2. beatumss.inf File Contents

beatumss.inf Driver File Contents (Mpin3.zip)

; Installation inf for the dnt 98 USB Mass driver
;

[Version]
Signature="$CHICAGO$"
Class=HDC
provider=%MSFT%

[Manufacturer]
%MfgName%=dnt

[dnt]
%USB\VID_10CB&PID_8001.DeviceDesc%=dntUMSS.install,USB\VID_10CB&PID_8001
%USB\VID_0419&PID_a002.DeviceDesc%=dntUMSS.install,USB\VID_0419&PID_a002
%UMSS\DISK.DeviceDesc%=beatpdr.install,UMSS\DISK

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
; \<WINDIR>\SYSTEM32\DRIVERS
beatumss.files = 10,System32\Drivers

; \<WINDIR>\SYSTEM\IOSUBSYS
beatpdr.files = 12

[dntUMSS.install]
CopyFiles=beatumss.files, beatpdr.files
AddReg=beatumss.addreg

[beatumss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,umss.sys


; If the device does not correctly indicate which protocol it uses,
; one of the following sections should be added to indicate which protocol
; the driver should use.

; Indicate that the device uses the C/B/I protocol
[cbi.addreg.HW]
HKR,,DeviceProtocol,0x10001,00

; Indicate that the device uses the C/B protocol
[cb.addreg.HW]
HKR,,DeviceProtocol,0x10001,01

; Indicate that the device uses the BULK ONLY protocol
[bulkonly.addreg.HW]
HKR,,DeviceProtocol,0x10001,50

; Install the port driver
[beatpdr.install]
AddReg=beatpdr.addreg

[beatpdr.addreg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,umsspdr.pdr



[beatumss.files]
umss.sys

[beatpdr.files]
umsspdr.pdr

[SourceDisksNames]
1000 = "dnt 98 USB Mass Storage Driver Install Disk","",,

[SourceDisksFiles]
umss.sys = 1000
umsspdr.pdr = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="dnt"
MfgName="dnt"
USB\VID_10CB&PID_8001.DeviceDesc="dnt 98 USB Mass Storage Drive"
USB\VID_0419&PID_a002.DeviceDesc="dnt 98 USB Mass Storage Drive"
UMSS\DISK.DeviceDesc="dnt 98 USB Mass Storage Device"