PCTCP.TXT Driver File Contents (de220.zip)

================================================================
NOTES ON
Installing D-Link DE-220 Family Ethernet Adapter
For FTP PC/TCP Users
================================================================
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains installation notes, which is not included in the
DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions,
for FTP PC/TCP users regarding DE-220 Family Ethernet Adapter
installation.

This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes
___________________________________________________________________


1.0 Introduction
--------------------

FTP PC/TCP users please also refer to the following:

    -------------------------------------------------------------------
     File                     Description/Installation notes
    -------------------------------------------------------------------
     \README.TXT              For all users
     \PKTDRV\README.TXT       For all Packet driver  users


 2.0 Installation Notes
---------------------------

     1. Load driver, Two methods available:

        Method 1
        --------
        First, in your CONFIG.SYS file, include the DE22XPD command.

            Format:
            DEVICE = DE22XPD.SYS [/option] <packet_int_no>

            <packet_int_no> is the software interrupt vector number used
                            by the packet driver program. This can be from
                            96 to 128.

            /d              Delay Initial - The driver program will not
                            initialize the network interface card until
                            the packet driver program is accessed by its
                            upper layer program.

            /w              The -w parameter is for use only in the
                            Windows environment.

        Please refer to the \PKTDRV\README.TXT for addition parameters

        Method 2:
        ---------

        Issue DE22XPD command at the DOS command prompt.

            Format
            DE22XPD [/option] <packet_int_no>

            <packet_int_no> is the software interrupt vector number used
                            by the packet driver program. This can be from
                            96 to 128.

            /d              Delay Initial - The driver program will not
                            initialize the network interface card until
                            the packet driver program is accessed by its
                            upper layer program.

            /w              The -w parameter is for use only in the
                            Windows environment.

        Please refer to the \PKTDRV\README.TXT for addition parameters

     2. Run the ETHDRV.EXE and IDRIVE.EXE device driver programs.
        These programs are provided by FTP.

     3. FTP's PC/TCP and associated programs are ready to used


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.57