IBMLAN.TXT Driver File Contents (

Installing D-Link DE-220 Family Ethernet Adapter
For Lan Support/Services Users
    (c) 1997 Copyright D-Link Corporation  ALL RIGHTS RESERVED

This document contains DE-220 Family Ethernet Adapter installation notes,
which is not included in the DE-220 Family Ethernet Adapter USER'S GUIDE
or onscreen instructions, for Lan Support/Services users.

This document contains information on the following topics:

1.0 Overview
2.0 Installation Notes For Lan Support users
3.0 Installation Notes For Lan Services 4.x


1.0 Overview

Lan Support/Services users please also refer to the following:

      File                Description/Installation notes
      \NDIS2\README.TXT   Overall installation notes for all NDIS users

2.0 Installation Notes For Lan Support users
    There are two Installation methods available to install DE-220 drivers
    for Lan Support users:

    2.1 Method 1
    1. Insert the LAN Support diskette in Drive A.

    2. Run DXMAID which is the install program.

                A:\> dxmaid

       The following message then appears:

                "Do you have driver diskettes?"  [Yes]

       Use the Spacebar to switch between "no" and "yes".

       After copying LAN Support, insert the driver diskette into the
       floppy disk drive.

    3. specify the drive and path of the DOS NDIS files.

       Example:         A:\NDIS2\DOS

    4. The installation procedure is completed after copying the
       necessary file.

    2.2 Method 2 -- Modifying the contents of the CONFIG.SYS and
                    PROTOCOL.INI files after installing other NICs
    1. Copy the DE22X.DOS file to the directory where your IBM LAN
       Support program resides.

    2. Modify the NDIS device driver statement in the CONFIG.SYS as

       DEVICE = [drive]:\path\DE22X.DOS

    3. Modify the PROTOCOL.INI file as follows:

       DRIVERNAME = DE22X$

3.0 Installation Notes For Lan Services 4.x

    1. Execute the installation program from the IBM DOS LAN SERVICES



    2. From the Network card field, select "Network card not shown in list

    3. Insert the driver diskette into the floppy disk drive.

    4. Specify the path for the corresponding oemsetup.inf file of the OEM
       driver intended for use. Then, press Enter. The program then
       displays the driver name.


    5. Check that the driver configuration is correct.

    6. Complete the installation, restart your system to use the DOS LAN

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.16