# | README file for GLoria-L | | ELSA graphics driver disk for Windows NT 4.0 build 1381. | | Version: 5.30.05.231 | | Copyright (c) 1993-97 ELSA AG, Aachen (Germany) | | ELSA AG Internet : http://www.elsa.de | Sonnenweg 11 LocalWeb : +49-(0)241-938800 | D-52070 Aachen CompuServe : GO ELSA | | ELSA Inc. Internet : http://www.elsa.com | 2231 Calle De Luna CompuServe : GO ELSA | Santa Clara, CA 95054 | USA | | ELSA Asia Inc. Internet : http://www.elsa.com | 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA | Nanking East Road | Taipei 105 | Taiwan, R. O. C. | | ELSA Japan Inc. Internet : http://www.elsa.com | Mita Suzuki Building 3F CompuServe : GO ELSA | 5-20-14 Shiba, Minato-ku | Tokyo 108-0014 | Japan | | 02/27/98, CBuersch Table of Contents: 1 Introduction 2 List of Files 3 Installation 4 Release Notes / Known Bugs ------------------------------------------------------------------------ 1 Introduction This file helps you with the installation of your ELSA graphics adapter. It explains how to setup the ELSA WINNER driver and check if it has been installed properly. 1.2 Further Information For more information on configuring installed ELSA display drivers, refer to the Windows help or the help files shipped with the ELSA utilities. ------------------------------------------------------------------------ 2 List of Files NOTE Not all of the files listed below can be used by your graphic adapters. Some utilities need specialized adapter capabilities and hardware. The directory with the ELSA graphics driver for Windows NT contains the following files: DISK1 Identifier for the first disk DISK2 Identifier for the second disk DISK3 Identifier for the third disk ELSA.HLP ELSA help file EGLMX.INF Script file for Microsoft setup program LIESMICH.TXT German version of the file README.TXT README.TXT This file TXTSETUP.OEM Script file for text setup while booting Graphics display drivers: EGLMXM.SYS Miniport driver EGLMXD.DLL Display driver EMGLMXD.DLL Multi-display driver EOGLL.DLL OpenGL driver Utilities: Subdirectory Glset: GLSET.DLL GLoria Settings property page GLSET.INF Script file for Microsoft setup program GLSET.TEX Data file for GLoria Settings GLSETENG.HLP English GLoria Settings help file GLSETDEU.HLP German GLoria Settings help file Subdirectory Winmsuit: ELSA.HLP ELSA help file ELSAENG.HLP ELSA help file english version WINMPS.DLL Applikation extension WINMSUIT.EXE WINMAN Suite for faster switching of the GLoria Settings WINMSUIT.INF Script file for WINMAN Suite Setup WSUIT_DE.DLL Applikation extension german language ------------------------------------------------------------------------ 3 Installation 3.1 Installing the ELSA Display Driver You can install the graphics driver using the Display Properties sheet. Open the Display Property sheet and select the page >>Settings<<, click on >>Display Type...<< to open the dialog window of the same name and select >>Change...<< in the Adapter Type frame. The >>Change Display<< dialog opens. NOTE The entry >>Elsa WINNER 1000<< in this listbox will install the general purpose (and less than optimal) S3 driver designed by Microsoft. The entries in the Manufacturer's >>S3<< list can be used but do not always work properly. General purpose drivers are installed here as well! Click the button >>Have Disk...<< to install the ELSA drivers. Windows NT prompts you to enter the disk with the driver or browse for the path. Select >>Browse...<< when installing from CD-ROM and locate the file ELSA.INF for the driver suitable for your hardware. When installing from floppy disk, insert the first driver disk. Select the >>OK<< button. A list box appears. Here, choose the entry matching your graphics adapter and click >>OK<<. Confirm the >>Third-party Drivers<< dialog with >>Yes<<. The driver files and utilities are now copied and installed to your hard disk. When installing from floppies, the >>Insert Disk<< dialog prompts you when the disk has to be changed. The >>Installing Driver<< window informs you that the driver has been installed. Confirm this message and close all display settings windows until you are asked to reboot your computer. NOTE With Windows NT 4.0, graphic drivers cannot be loaded dynamically. This is not an ELSA limitation. To activate the ELSA driver the computer has to be restarted. Please press >>Yes<< in the >>System Settings Change<< dialog. When you've selected to restart, the system will reboot and the initial installation is finished. NOTE Windows NT 4.0 will now restart in a resolution of 640*480 pixel at 256 colors and 60Hz refresh, unless you have updated your driver in which case the previous resolution is taken over. Refer to your Windows NT Help on how to change the display properties settings. After Windows NT is restarted, the dialog >>Registry Editor<< informs you that some information has been entered into the registry. This was done to install the display property pages. Simultaneously the Display Properties sheet opens with the >>Settings<< page and a dialog >>Invalid Display Settings<< which tells you that a new driver was installed and that you have to select your preferred display resolution. 3.2 Installation of the ELSA GLoria Settings The ELSA GLoria Settings can be easily installed from the Explorer by clicking the right mouse button on the appropriate GLSET.INF file in the directory "ALPHA\GLSET" in the source-path for the driver-installation and then selecting "Install...". NOTE: For deinstallation of the GLoria Settings, choose "Add/Remove Programs" in Control Panel. 3.3 Installation of the ELSA Winman Suite The ELSA Winman Suite can be easily installed from the Explorer by clicking the right mouse button on the appropriate WINMSUIT.INF file in the directory "ALPHA\WINMSUIT" in the source-path for the driver-installation and then selecting "Install...". After the installation the system has to be rebooted for the utility to appear in the task bar. Alternatively, you can start the file WINMSUIT.EXE in your "WINDOWS NT\ELSAUTIL" directory. NOTE: For deinstallation of the Winman Suite, choose "Add/Remove Programs" in Control Panel. ----------------------------------------------------------------------------------------------- 4 Release Notes / Known Bugs 4.1 Release Notes First release 4.2 Known bugs PRO/E Graphics Short Check: Hidden lines may be visible With 3D extensions deactivated it may happen that sketches are not visible. Sketches may become black cubes while rotating/zooming/panning.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.