1. cdlx-5.10.3510.exe Driver
2. Version.txt File Contents

Version.txt Driver File Contents (cdlx-5.10.3510.exe)

CardDeluxe(TM) Driver Version History

Version 5.10.3510 (2006-02-24):
This driver supports Windows(R) 2000 SP3 (or later), Windows(R) XP and Windows(R) XP x64 Edition.
1. Implement editable card names (not supported on Windows 2000 platforms).
2. Add preliminary x64 ASIO driver.
3. Add preliminary support for WMA Pro over S/PDIF.
The following items are not available in this release:
1. DRM support (not scheduled at this time).
2. SMP configurations have not yet been tested on a variety of platforms.
3. WavSync(TM) and clock synchronization of more than two cards has not yet been tested.
4. Power management has not yet been tested on a variety of platforms.
5. The CardDeluxe(TM) Device Driver Wizard is not yet available on the x64 platform.
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3509 (2005-07-22):
This driver supports Windows(R) 2000 SP3 (or later), Windows(R) XP and Windows(R) XP x64 Edition.
Fourth WDM Audio driver public release candidate (RC4).
1. Make sure ASIO driver fills initial input buffers with silence.
2. Add support for BETA Windows(R) XP x64 Edition driver.
The following items are not available in this release:
1. DRM support (not scheduled at this time).
2. SMP configurations have not yet been tested on a variety of platforms.
3. WavSync(TM) and clock synchronization of more than two cards has not yet been tested.
4. Power management has not yet been tested on a variety of platforms.
5. In multi-card installations, all cards show up as "CardDeluxe".
6. The ASIO driver is not available in the x64 Edition driver because Steinberg has
   not yet provided specifications for ASIO on x64 platforms.
7. The CardDeluxe(TM) Device Driver Wizard is not yet available on the x64 platform.
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3508 (2004-09-21):
This driver supports Windows(R) 2000 SP3 (or later) and Windows(R) XP.
Third WDM Audio driver public release candidate (RC3).
1. Change input monitor default settings to "muted".
2. Make sample position semantics consistent between record and play modes.
3. Reduce audio dropouts.
4. Fix hardware access timings.
5. Add BETA ASIO driver.
The following items are not available in this release:
1. DRM support (not scheduled at this time).
2. SMP configurations have not yet been tested on a variety of platforms.
3. WavSync(TM) and clock synchronization of more than two cards has not yet been tested.
4. Power management has not yet been tested on a variety of platforms.
5. In multi-card installations, all cards show up as "CardDeluxe".
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3507 (2004-02-23):
This driver supports Windows(R) 2000 SP3 (or later) and Windows(R) XP.
Second WDM Audio driver public release candidate (RC2).
1. Fix volume adjustment error.
2. Fix problems in 16-bit mono play/record.
3. Fix AC3 over S/PDIF mode.
4. Fix typo in device installation file.
The following items are not available in this release:
1. ASIO(TM) driver support (scheduled to be provided in future WDM Audio driver release).
   Applications requiring ASIO should use MME drivers until a WDM ASIO driver is released.
2. DRM support (not scheduled at this time).
3. SMP configurations have not yet been tested on a variety of platforms.
4. WavSync(TM) and clock synchronization of more than two cards has not yet been tested.
5. Power management has not yet been tested on a variety of platforms.
6. In multi-card installations, all cards show up as "CardDeluxe".
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3506 (2004-01-30):
Original WDM Audio driver public release candidate (RC1).
This driver supports Windows(R) 2000 SP3 (or later) and Windows(R) XP.
1. Ensure taskbar and configuration applets are called in Unicode context.
2. Add taskbar applet menu item to open CardDeluxe help file.
3. Fix problems when resuming from hibernate.
4. Reduce clicks and pops when changing sample rates and rebooting.
5. Eliminate stale audio fragment at beginning of playback.
6. Add CardDeluxe(TM) Device Driver Wizard.
The following items are not available in this release:
1. ASIO(TM) driver support (scheduled to be provided in future WDM Audio driver release).
   Applications requiring ASIO should use MME drivers until a WDM ASIO driver is released.
2. DRM support (not scheduled at this time).
3. AC3 over S/PDIF has not yet been tested.
4. SMP configurations have not yet been tested.
5. WavSync(TM) and clock synchronization of more than two cards has not yet been tested.
6. Power management has not yet been tested on a variety of platforms.
7. In multi-card installations, all cards show up as "CardDeluxe".
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3505 (2003-12-26): [beta testing release only]
Third WDM Audio driver beta release.
This driver supports Windows 2000 SP3 (or later) and Windows XP.
1. Fix errors in digital output channel status bits.
2. Fix cosmetic errors in help file.
3. Fix ADC calibration timing.
4. Fix digital output channel status sample rate bits.
5. Properly handle -INF dB volume sliders.
6. Add power management support.
7. Add support for OEM customer application default settings.
8. Add WavSync support.
9. Add config dialog button to snap faders to unity gain.
10. Add "dither help" config dialog button.
11. Add device co-installer to ease driver update process.
The following items are not available in this release:
1. ASIO driver support.
2. DRM support.
3. AC3 over S/PDIF has not yet been tested.
4. SMP configurations have not yet been tested.
5. WavSync and clock synchronization of more than two cards has not yet been tested.
6. Power management has not yet been tested on a variety of platforms.
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3504 (2003-11-04): [beta testing release only]
Second WDM Audio driver beta release.
This driver supports Windows 2000 SP3 (or later) and Windows XP.
1. Add configuration and taskbar applets.
2. Implement digital input and multi-card clock mastering.
The following items are not available in this release:
1. WavSync support.
2. ASIO driver support.
3. Power management support.
4. DRM support.
5. Support for OEM customer application default settings.
6. AC3 over S/PDIF has not yet been tested.
7. SMP configurations have not yet been tested.
8. Digital output channel status bits have not yet been tested.
9. Synchronization of three or more cards has not yet been tested.
10. Mixer settings may not be saved correctly after rebooting.
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 5.10.3503 (2003-09-19): [beta testing release only]
Original WDM Audio driver beta release.
This driver supports Windows 2000 SP3 (or later) and Windows XP.
The following items are not available in this release:
1. Synchronization of more than one card.
2. WavSync support.
3. Clock mastering from the digital input clock.
4. Configuration and taskbar applets.
5. ASIO driver support.
6. Power management support.
7. DRM support.
8. Help file.
9. Support for OEM customer application default settings.
10. AC3 over S/PDIF has not yet been tested.
11. SMP configurations have not yet been tested.
12. Digital output channel status bits have not yet been tested.
13. Digital input streaming has not yet been tested.
Please see the file "ReadMe.txt" for more details.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.06.1037 (2002-02-22):
PnP driver for Windows 2000 and Windows XP only.
1. Initial release of plug and play driver for Windows 2000 and XP.
2. Add CardDlxConfig.exe program and automatic installation on taskbar
   for easier access to the configuration dialog.
3. Update help file.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1038 (2001-07-12):
1. Add support for OEM customer application.
2. Update mail/fax registration to reflect new area code and address.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1037 (2001-02-14):
1. Disable pre-emphasis in consumer non-audio mode to match spec.
2. Add driver debugging options.
3. Update help file to reflect new area code and address.
4. Queue callbacks to ensure they are not called reentrantly in NT driver.
5. Allow smaller ASIO/EASI buffer sizes.
6. Cosmetic changes in configuration pages.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1036 (2000-02-22):
1. Properly recover from driver thread startup/shutdown failure.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1035 (2000-02-21):
1. Ensure driver thread starts before returning from open.
2. Allow user to forcibly close driver.
3. Add debugging messages to driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1034 (1999-12-28):
1. Allow up to 16 cards to be installed on a system.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1033 (1999-12-21):
1. Ensure playback and record channels are locked in ASIO driver.
2. Fix blue-screen crash in NT kernel driver.
3. Fix rundown failure when too much data queued to NT kernel driver.
4. Add better initialization failure diagnostics to NT kernel driver.
5. Add ASIO and EASI driver buffer size settings to config dialog.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1032 (1999-11-08):
1. Fix device startup problem in "lock record to playback" mode.
2. Use common sources for Windows(R) 95/98 and Windows NT(R) DMA objects.
3. Ensure buffer callbacks happen sequentially.
4. Add initialization debugging event log messages to Windows NT driver.
5. Release ASIO driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1031 (1999-10-21):
1. Fix minor build warnings in Windows NT kernel driver.
2. Use correct device type identifier in Windows NT kernel driver.
3. Release Windows NT driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1030 (1999-10-13): [beta testing release only]
1. Use default security descriptor to create Windows NT wave driver mutex.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1029 (1999-10-12): [internal testing release only]
1. Fix time alignment difference between input and output in ASIO driver.
2. Return correct error code if no CardDeluxe(TM) found by ASIO driver.
3. Fix sporadic hang when changing configuration in ASIO driver.
4. Add analog input dithering options for 8-bit and 16-bit recording.
5. Prevent extra driver close when user cancels open after clock mismatch.
6. Log clock errors in application event log under Windows NT.  For some
   reason, trying to display an error message dialog doesn't seem to work
   reliably from inside a Windows NT user mode driver.
7. Make copy protection bits in digital output channel status data work the
   same way they did in the CardD Plus.
8. Ensure unique device names for multimedia (wave) and DirectSound(R) devices.
9. Add additional error recovery to Windows NT wave driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1028 (1999-09-16): [beta testing release only]
1. Fix sample rate/bit depth setup problem under Windows 9x.
2. Fix product version information in NT kernel driver.
3. Report an error when the hardware doesn't match the NT kernel driver.
4. Handle missing hardware more gracefully in NT wave driver.
5. Support wave output driver volume control.
6. Support DirectSound volume control.
7. Update help file for Windows NT.
8. Add workaround so GigaSampler can recognize the CardDeluxe(TM).
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1027 (1999-09-10): [beta testing release only]
1. Make WavSync(TM) work under Windows NT.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1026 (1999-09-10): [internal testing release only]
1. Make monitor levels work in real time in NT wave driver.
2. Use generic resources in clock master dialog to support 9x and NT.
3. Increase registry path lengths to support clock mastering in NT.
4. Don't try to display an error window before the desktop window is up.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1025 (1999-09-09): [internal testing release only]
1. Update 9x kernel driver to use NT-style buffer queueing IOCTL.
2. Fix multiple-card support in NT wave driver.
3. Fix version resource in 9x and NT wave drivers.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1024 (1999-09-08): [internal testing release only]
1. Fix interrupt processing for tiny buffers at end of DMA.
2. Fix off-by-one range check in waveInGetDevCaps.
3. Default to automatic clock if clock master disappears.
4. Support final WAVE_FORMAT_EXTENSIBLE specification.
5. Add BETA Windows NT driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1023 (1999-07-26):
1. Fix digital transmitter channel status bits; indicate audio data is 24-bit.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1022 (1999-07-22): [beta testing release only]
1. Only recalibrate ADCs when the sample rate or sample clock source changes.
2. Lengthen ADC recalibration delay to adjust for DC offset settling.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1021 (1999-07-19): [alpha testing release only]
1. Fix multiple clock master error checking.
2. Update help file with changes from new manual.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1020 (1999-07-08): [alpha testing release only]
1. Fix problems with certain buffer sizes in 24-bit packed mode.
2. Use adjusted fader values when opening devices, not configured ones.
3. Fix master/slave selection bug in BETA ASIO driver.
4. Fix bugs in power management code.
5. Only change monitor settings when monitoring is enabled.
6. Prevent output buffer truncation in looped buffers.
7. Return correct response to ASIO 2.0 feature request in BETA ASIO driver.
8. Fix installation directory bug in BETA ASIO driver install script.
9. Fix ADC reset.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1019 (1999-07-01): [internal testing release only]
1. Add new monitoring features.
2. Add "automatic" clock selection mode.
3. Fix start/stop bugs in BETA ASIO driver.
4. Fix clock selection bug in BETA ASIO driver.
Note: this driver requires firmware version 1.03.0007 or later.

Version 4.05.1018 (1999-06-21): [internal testing release only]
1. Add BETA ASIO driver.
Note: this driver requires firmware version 1.01.0006 or later.

Version 4.05.1017 (1999-06-10): [internal testing release only]
1. Return correct byte position for A-Law and mu-Law formats.
2. Properly handle starting playback/record when no audio queued.
3. Add "sample accurate" flag to device capability support flags.
4. Update help file to include information in installation guide.
5. Support power management.
6. Improve system responsiveness when opening driver.
7. Fix digital input clock/data mismatch checking.
8. Reset ADC each time driver starts.
Note: this driver requires firmware version 1.01.0006 or later.

Version 4.05.1016 (1999-05-26): [internal testing release only]
1. Fix "out of memory" bug when opening driver.
2. Fix occasional blue-screen error when closing wave driver.
3. Add support for A-Law and mu-Law output.
4. Fix close failure after reset.
5. Compensate for ADC noise pulse after calibration.
6. Continue playing/recording after buffer underruns.
7. If buffers are small, queue up to 0.25 seconds of audio to DMA
   controller, rather than just 4 buffers of audio.
Note: this driver requires firmware version 1.01.0006 or later.

Version 4.05.1015 (1999-05-14): [internal testing release only]
1. Add support for WavSync(TM): hardware multi-card play/record sync.
2. Set digital transmitter to selected audio data mode when monitoring.
3. Fix problems with buffers at odd addresses.
4. Add product registration tab to configuration dialog.
5. Add configuration options for digital receiver and transmitter.
6. Report invalid sample clocks.
7. Add PCI revision sanity check.
8. Improve EEPROM read/write performance.
Note: this driver requires firmware version 1.01.0006 or later.

Version 4.05.1014 (1999-04-21):
1. Use internal clock on slave CardDeluxe(TM) if master is removed.
2. Fixed cosmetic inconsistencies in "Clock+Sync" page.
3. Show "Version" page for each installed CardDeluxe(TM).
4. Allow configuration dialog to be shown using rundll32.exe.
5. Provide card name set in "Configuration" page to applications.
6. Eliminate clicks when turning record monitors on and off.
7. Disallow clock changes while playback/record is in progress.
8. Reduce amount of pagelocked code in wave driver.

Version 4.05.1013 (1999-04-14): [internal testing release only]
1. Fixed support for more than one CardDeluxe(TM).
2. Added support for clock mastering of more than one CardDeluxe(TM).
3. Fix problems with loop mode playback.
Note: multi-card playback and record will work in this release, but
direct synchronization (WavSync(TM)) is not yet implemented.

Version 4.05.1012 (1999-04-09):
1. Fixed digital output sample rate status bits.

Version 4.05.1011 (1999-04-07): [internal testing release only]
1. Fixed support for 24-bit packed data.

Version 4.05.1010 (1999-04-05):
1. Fixed playback startup for DirectX(R) plug-ins, which tell the driver
   to start playing before they send any audio.

Version 4.05.1009 (1999-03-31): [internal testing release only]
1. Added features for manufacturing and production testing.
2. Simplified record monitoring control panel.

Version 4.05.1008 (1999-03-25):
Original driver release.
The following items are not available in this release:
1. Windows NT drivers.
2. Direct synchronization and clock mastering of more than one CardDeluxe(TM).
3. Driver support for AES/EBU add-on bracket.
Please see the file "ReadMe.txt" for more details.



CardDeluxe(TM) Firmware Version History

Version 1.04.0012, PCI Rev 004 (2005-02-28):
Original firmware release for rev F CardDeluxe(TM).
Updated firmware for rev D and rev E CardDeluxe(TM).
1. Fix PCI bus transactions over PCI-PCI bridges.
Note: this firmware requires driver version 4.05.1020 or later.

Version 1.04.0011, PCI Rev 004 (1999-08-03):
Original firmware release for rev E CardDeluxe(TM).
Updated firmware for rev D CardDeluxe(TM).
1. Fix "click" at beginning of playback.
Note: this firmware requires driver version 4.05.1020 or later.

Version 1.04.0010, PCI Rev 004 (1999-07-23):
Updated firmware for rev D CardDeluxe(TM) (patch to 1.04.0009).
1. Fix digital transmitter channel status bits.
2. Don't hold calibrate while resetting ADC after power-up.
Note: this firmware requires driver version 4.05.1020 or later.

Version 1.04.0009, PCI Rev 004 (1999-07-20): [beta testing release only]
Updated firmware for rev D CardDeluxe(TM) (patch to 1.04.0008).
1. Fix WavSync(TM) synchronization for clock masters.
Note: this firmware requires driver version 4.05.1020 or later.

Version 1.04.0008, PCI Rev 004 (1999-07-12): [alpha testing release only]
Updated firmware for rev D CardDeluxe(TM).
1. Fix clock loss detector; only detect loss for bus and PLL clocks.
2. Disallow reading monitor registers; move IRQ status register.
3. Fix ADC reset.
Note: this firmware requires driver version 4.05.1020 or later.

Version 1.03.0007, PCI Rev 003 (1999-07-01): [internal testing release only]
Updated firmware for rev D CardDeluxe(TM).
1. Reorganize hardware address space.
2. Add new monitoring features.
3. Fix single-card WavSync(TM) mode.
Note: this firmware requires driver version 4.05.1019 or later.

Version 1.01.0006, PCI Rev 002 (1999-06-10): [internal testing release only]
Updated firmware for rev D CardDeluxe(TM).
1. Add support for WavSync(TM): hardware multi-card play/record sync.
2. Add support for digital out channel status bits.
3. Protect against loss of sample clock.
4. Fix FIFO tag bits.
5. Allow for short buffer at end of playback.
6. Change timings to reduce boot problems.
7. Allow for ADC reset.
Note: this firmware requires driver version 4.05.1015 or later.

Version 1.01.0005, PCI Rev 001 (1999-04-12):
Original firmware release for rev D CardDeluxe(TM).
Updated firmware for rev A and rev C CardDeluxe(TM).
1. Fixed digital input clock mastering.

Version 1.01.0001, PCI Rev 001 (1999-03-26):
Original firmware release for rev A and rev C CardDeluxe(TM).



CardDeluxe and WavSync are trademarks of LR Sound, Inc.
DirectSound, DirectX, Windows and Windows NT are registered trademarks
of Microsoft Corporation in the United States and/or other countries.
ASIO is a trademark of Steinberg Media Technologies GmbH.
EASI is a trademark of Emagic GmbH.
All other trademarks are property of their respective holders.