ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Installation for NetWare Server ODI ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. NetWare v3.1x installation: (use respective directory \NWSERVER\311
or \NWSERVER\312)
1. Copy W840OD.LAN and associated files, MSM31X.NLM, ETHERTSM.NLM,
NBI31X.NLM to SYS:SYSTEM directory on the NetWare Server.
2. Add to your AUTOEXEC.NCF the line required to load the
W840OD.LAN and bind protocol stack to it.
B. NetWare v4.x installation:
1. On the server's prompt type: LOAD INSTALL
2. When the install program comes up, choose the menu item that
refers to NETWORK DRIVERS.
Note that this menu item is on different place on different
NetWare versions (i.e. v4.0x vs. 4.1x).
3. Insert this driver diskette into drive A:, and specify the path
A:\NWSERVER\4X.
4. Install the network driver W840OD.LAN according to the NetWare
manual, or use the on-line instructions and help.
C. Parameters
The following parameters belong on the server's command line, or in
the load line inside the AUTOEXEC.NCF. The general way of using these
parameters is:
LOAD <driver name> <PARAMETER NAME>... <PARAMETER NAME[=VALUE]>
Example:
LOAD <driver name> SLOT=2 FRAME=Ethernet_802.2
Slot Select a specific 840 card
Format: Slot=<Value>
BusrtLen Set Burst Length
Format: BurstLen=<Value>
Allowed values are 1 ~ 6.
CacheAlign Set cache alignment
Format: CacheAlign=<Value>
Allowed values are 1 ~ 3.
TxThreshold Set transmit threshold
Format: TxThreshold=<Hexdecimal Value>
Allowed values are 0 ~ 7F.
FullDuplex Set full duplex function
Format: FullDuplex=<String>
Allowed strings are AutoDetect, Disable,
Enable
LineSpeed Select line speed
Format: LineSpeed=<String>
Allowed strings are AutoDetect, 10M, 100M
DescriptorStructure Set descriptor structure,
Format: DescriptorStructure=<String>
Allowed strings are Chain, Ring
TxMoveData Set transmit remove data or not
Format: TxMoveData=<String>
Allowed strings are Disable, Enable
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.