****************************************************************************
* *
* Plug & Play Ethernet Card *
* *
* Windows 95 Driver *
* *
* Ver. 3.01 *
* *
* README file *
* *
****************************************************************************
1. Introduction:
This Ethernet NDIS driver supports Microsoft Windows 95 environment.
2. Contents of the Subdirectory:
PNPND.SYS The driver for Windows 95.
3. Installation:
1) Install your PnP Ethernet Card on your PC system following the
procedure described in your installation manual.
2) Power up your PC to start Windows 95.
3) When the "New Hardware Found" panel appears, select "Driver
from disk provided by hardware manufacturer" to install the
Win 95 driver from our Ethernet Driver Disk.
4) When the "Install from Disk" panel appears, insert our Ethernet
Driver Disk to any floppy on your system. Then specify the path
where the driver exists (e. g., A:\ or B:\), and select OK.
5) When the driver installation is completed, restart Windows 95.
6) When the driver installation is completed, check if the network
component "File and printer sharing for Microsoft Network" is
installed. If not, do the following to add it.
This is to ensure other users on the network can connect to you.
a) Click the "Network" icon in the Control Panel.
b) Click the "Add" button in the Network panel.
c) From the panel that can let you click the type of network
component you want to install, choose "Sevice".
d) When the "Select Network Service" panel appears, choose
"Microsoft" as the manufacturer and "File and printer sharing
for Microsoft Network" as the network services, then click
the OK button.
e) Restart Windows 95.
Note: If you are using the adapter with Realtek chip, you do not
need to load the driver by yourself. Since that card is a
can be detected by Windows 95 while booting. System will
load drivers automatically for "Realtek RTL8019 PnP LAN
adapter or compatible" for you to use.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.