1. 9999999999_128.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (9999999999_128.zip)

Contents:

 Section A) ISDN BOARD installation procedure:
 Section B) How to confirm the installation completed (optional):
 Section C) How to re-install the driver (for any reason):
 Section D) How to setup the Dial Up Networking:
 Section E) How to setup the ML-PPP (128KBPS call):
 Section F) How to re-configurate your ISDN line(change Phone or SPID number):
 Section G) How to configurate your PC to be a Dial-Up Server:
 Sectino H) How to use CAPI application.
 Section I) Release Notes ver2.00B:
______________________________________________________________
A) ISDN BOARD installation procedure:

  1) Run a:\msisdn11.exe:

        Before you plug the ISDN BOARD into your PC,
        insert the install disk and run a:\msisdn11.exe.
	During the execution, click "OK" for all the
	questions.
        

  2) Plug the ISDN BOARD in:

        After you run msisdn11.exe, power down the PC,
        and plug the ISDN BOARD in. 


  3) Follow the instruction prompte by Windows 95:

        After plug the ISDN BOARD into your PC,
        power up the machine. Since the ISDN adapter is
        Plug and Play, the Window 95 will automatic find the
        hardware and ask for the install disk. Insert the install
        disk and complete the installation process as prompted by
        Windows 95.
	During the installation, you only need to type in Phone #
        and SPID #. You should get two phone # and two SPID # from
        telephone company when they install you ISDN line. The switch
        type is configuration(you can manual select as
        well).

  4) Reboot the system and the ISDN line is ready to be used.

 _________________________________________________________________

B)  How to confirm the installation completed (optional):

   1) In the Windows 95 Control Panel, double-click the System icon.
   2) From the Device Manager tab in the System window, double-click
      the Network adapters. If you see the ISDN card list under 
      Network adapters and without a yellow "!" sign in
      front of it, your installation is succeed and you are ready
      to make call using the ISDN BOARD. For any reason, if the
      installation is not successful, follow Section C procedure to
      re-install the driver.
       
____________________________________________________________________

C) How to re-install the driver (for any reason):

   1) In the Windows 95 Control Panel, double-click the System icon.
   2) From the Device Manager tab in the System window, double-click
      the "Network adapters". Select the 128k ISDN card and click
      "Remove".
   3) If you find 128k ISDN card under "Other devices", select and
      Remove it also.
   4) In c:\windows\inf directory, del tiger.inf.
   5) Follows the procedure in Section A to re-install the driver.

______________________________________________________________________

D) To setup the Dial Up Networking:

    Go into "My Computer", then "Dial Up Networking" and click on
    "Make New Connection" to assign a name, modem type(TJISDN-Line1),
    and phone number. You are ready to dial out.

____________________________________________________________________

E) To setup the ML-PPP (128KBPS call):

    Go into "My Computer", then "Dial Up Networking" ,then click on
    "your phone icon" , and then click on "File",
    then click on "Property", then click on "Settings". Select
    "Use additional device", then click on "Add", then select
    "TJISDN-Line2".  You are ready to make a 2B call.
___________________________________________________________________

F) To re-configurate your ISDN line(change Phone or SPID number):

    After the installation, if you want to re-configurate your ISDN line
    (change your phone or SPID number),
    click "Start", then "Programs", then "Acessories", then "ISDN Tools",
    then "ISDN Configuration Wizard" and then following the instruction to
    reconfigurate your ISDN line.
____________________________________________________________________

G) To configurate your PC to be a Dial-Up Server:

    In Dial-Up Networking, Click "Connections", and then click
    "Dial-Up Server". Select "TJISDN-Line1" and Click "Allow caller access".
    Your ISDN line1 is ready for income call.
___________________________________________________________________

H) To use CAPI 2.0 application:

    CAPI 2.0 driver is installed with NDISWAN driver and ready to be
    used with CAPI 2.0 Application. If you are using the CAPI application
    in US, you should change the "audio type" from A-law to U-law in
    Tiger.inf

____________________________________________________________________

I) Release Notes ver2.00B:

    This version of driver support ETSI,5ESS,DMS100,NI1 and NTT protocol.