===========================================================
PS3 128K PCI ISDN-S/T Window NT 4.0 Installation Procedure
===========================================================
-------------------
GENERAL INFORMATION
-------------------
This document describe the software setup procedure for installation
ISDN Modem in the Window NT 4.0 X86 system. For the hardware installation
procedure, please refer to the user manual.
-----------
PREPARATION
-----------
Before you install, make sure you have the following:
1. PS3 128K ISDN Modem.
2. An ISDN line installed.
3. Your switch type, and phone numbers from your telephone
company.
4. A PC with Microsoft Windows NT 4.0 installed.
----------------------
INSTALLATION PROCEDURE
----------------------
1. Go to "Control Panel", select "network".
2. If you do not have NT network installed, follow the setup wizard
for the NT network setup.
3. Select "Adapter", then select "Add".
4. Do not use "Detect" command. Use "Select from the list" and select
"Have Disk".
5. Put the diskette labeled "ISDN Driver Disk(PS3) for Windows 95/NT4.0"
into the floppy disk drive and Select \NT40 directory than type in
the driver name.
6. Select the Network ISDN Adapter. The Windows will copy the
files from the diskette and open a dialog windows for the ISDN line
information.
7. Select the proper switching type, Also type in the dialing numbers and
the SPIDs. If you have only one number, just type in the number on the
first set of the field, leave the second one blank. If your ISDN switch
type do not support the SPID number, leave the SPID field empty.
8. If you do not have the service "Remote Access Service" installed. The
Window will start to install the "Remote Access Service". Place the
NT installation CD into the CD ROM and type in the path for it. The
setup program will copy the file to install the service.
9. If the "Remote Access Service" is installed, the setup will involve
the "Remote Access Service" configuration. Select "TJISDN" for the
"RAS Capable Devices". There will have two "ISDN" port available.
Select both ISDN ports and you need to select the "Network" to
configure the network protocol which will be used for your network
application.
10. Select "Close" to finish the "Remote Access Service" setup and reboot
the system.
11. Configure the "Dial-Up Networking" to use the "TJISDN" port for the
dialing out. If you need to make 128K connection, select "All
available ISDN lines multi-linked".
12. You need to setup the "Server" inside the "Dial-Up Networking" for
the correct network connection. Now you are ready to use PS3 128K
ISDN for the ISDN connection.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.