NWC32.TXT Driver File Contents (9999999999_109.zip)

   NetWare Client 32 Driver

   This document describes the procedure to setup the NetWare Client 32 for
   RealTek RTL8019 Plug & Play ethernet adapter.

   Location of Driver:  \NWCLIENT\CLIENT32\PNPSRV.LAN

   Sample Configuration Files:
      STARTNET.BAT (Client 32 for DOS/Windows will contain):

          SET NWLANGUAGE=English
          LOAD C:\NOVELL\CLIENT32\PNPSRV.LAN FRAME=Ethernet_802.3

   A. Driver Installation Procedures on Clien32 for DOS :
      1.If you have completed installed the Netware Client 32 for DOS, all
        you have to do is to modify STARTNET.BAT.  Please see the  sample
        STARTNET.BAT above. If not, Please follow the next step 2 - step 7.

      2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
        Netware 4.11 CD).  When  the  product  manual  appears,  mark the
        "Netware Client 32 for DOS" item, then press <Enter>.

      3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
        then press <Enter>.

      4.Insert Realtek RTL8019 Driver Diskette, then specify the driver path
        like A:

      5.Select "Realtek RTL8019 ISA driver", then press <Enter>.

      6.Following instructions to complete the Client32 for DOS software

      7.Reboot your machine.

       Installation Notes:
       * Installing Multiple LAN Adapters:
          The keyword "EtherID" is the ethernet address of a adapter. This
          keyword is provided for multiple LAN adapters in a single server
          by the driver PNPSRV.LAN.  So, add EtherID in LOAD commands. For

          LOAD LSLC32.NLM
          LOAD CMSM.NLM
          LOAD PNPSRV EtherID=0123456789AB FRAME=Ethernet_802.2
          LOAD PNPSRV EtherID=0123456789BC FRAME=Ethernet_802.2

   B. Driver Installation Procedures on Client32 for Windows 3.x :
     Refer to Content A. On step 2, mark "Netware Client 32 for DOS"  and
     "Client 32 for Windows".   On step 4, specify  the  driver path like
     A:\CLIENT32\PNPSRV.LAN , then  following step  3..7  to complete the

   C. Driver Installation Procedures on Client 32 for Windows 95 :
     If you have installed the Microsoft Client in your Windows 95 system,
     you should remove the adapter object & NDIS 2/3 driver of the RTL8019
     adapter from the  Windows 95 system. If you have installed previously
     Realtek's RTL8019  NDIS 2/3 driver, you should do the following steps
     before installing the RTL8019 Client 32 driver. ( Note:  If you never
     pluged Realtek RTL8019 ISA adapter into your PC, Procedure C.1 is not
     necessary.  And you just start from Procedure C.2)

     C.1 Remove the previously installed adapter object & driver of Realtek
         RTL8019, if any.
         1. Click the "My Computer" icon in the Main Program Group.
         2. Click the "Control Panel" icon from My Computer window.
         3. Click the "System" icon from the Control Panel window.
         4. Click the "Network adapter" icon from System window.
         5. Click the "Realtek RTL8019 PnP Ethernet Adapter" icon from
             System window.
         6. Click <Remove> button, then click <OK> button.
         7. Close the opened windows.

     C.2 Driver Installation on Client 32 for Windows 95 :
         1. Plug Realtek's RTL8019 adapter into your PC machine.
         2. Turn the power on to bootup the Windows 95.
         3. Windows 95 will then prompt the "Realtek RTL8019 Ethernet ISA
             Adapter" in New Hardware Found dialog box.
         4. Following instructions to complete the installation,
             Windows 95 will ask you to keyin the proper path of the
             following diskette:

             a. Netware Client 32 for Windows 95 Disk
             b. Realtek RTL8019 PnP Ethernet ISA Adapter Driver Diskette:
                Insert RTL8019 Driver Diskette, then, assign the path to
             c. Windows 95 CD-ROM

      Installation Notes:
      * RTL8019 should be setted in jumpless (non-pnp) mode. If setted in
        pnp mode,  Windows 95  system  will auto-detect the adapter, then
        auto-load RTL8019  NDIS3 driver which has been included in OS.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.09