Windows for Workgroups v3.11 Introduction: ------------- This document describes the procedure to install Microsoft Windows for Workgroups v3.11 driver for REALTEK RTL8019 Plug&Play ethernet adapter. LOCATION OF DRIVER: \WFW311\PNPND.386 Setup Procedure: ---------------- After you run into Windows for Workgroup 3.11: 1. Select the "Network Setup" icon in the Network Group. 2. Click on the "Drivers..." button. 3. If you are replacing a previous LAN adapter select the Remove button to delete that adapter 4. Click on the "Add Adapter" button. 5. Choose "Unlisted or Updated Network Adapter". 6. Insert the adapter driver disk in drive A and specify the path A:\WFW311 for the location of the driver. 7. Close, and when prompted, restart your computer so that changes take affect. NOTES: ------ 1. Parameters for the PROTOCOL.INI file: AdapterID : This keyword is provided by PNPND, and is required when more than one RTL8019 adapters exist on one system. 2. Installing Multiple LAN Adapters: There are two different method to complete: (a) Under DOS mode, you can modify the AdapterID in file C:\WFW311\PROTOCOL.INI by yourself. (b) Or you can enter Windows for WorkGroup and follow above setup procedurc step 2,then click on "Setup.." button, select "Advanced...",fill AdapterID in Value item. Last step to select OK and close NETWORK SETUP. 3. Sample PROTOCOL.INI: Windows for Workgroups creates the PROTOCOL.INI for you. This is provided for reference. This is a sample with Microsoft Netbeui and IPX/SPX Compatible Transport with Netbios. [network.setup] version=0x3110 netcard=RTL8019,1,RTL8019,3 transport=ms$nwlinknb,NWLINK transport=ms$ndishlp,MS$NDISHLP transport=ms$netbeui,NETBEUI lana0=RTL8019,1,ms$netbeui lana1=RTL8019,1,ms$nwlinknb lana2=RTL8019,1,ms$ndishlp [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [RTL8019] DriverName=PNPND$ AdapterID=@000000000123 [PNPND] Adapters=RTL8019 [NWLINK] BINDINGS=RTL8019 [MS$NDISHLP] DriverName=ndishlp$ BINDINGS=RTL8019 [NETBEUI] DriverName=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=RTL8019 LANABASE=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.