ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Installation for NetWare Client 32 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. Software Revision Requirements:
o NetWare version 3.11 or above.
o Novell support modules as supplied in kit directories.
B. Supplied Files:
Table 1: The Novell NetWare ODI Server Directory Files
---------------------------------------------------------------------
DC21X4.LAN DC21X4 Novell NetWare ODI server driver.
---------------------------------------------------
DC21X4.LDI Novell network installation file for this driver
--------------------------------------------------------------------
C. Installing Software:
NetWare Client 32 Installation :
1) Copy \NWSERVER\DC21X4.LAN into the NetWare Client 32
subdirectory (default is C:\NOVELL\CLIENT32).
2) Modify STARTNET.BAT in NetWare Client 32 subdirectory.
For example :
SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
D. Parameters
The following parameters belong on the server's command line, or in
the load line inside the AUTOEXEC.NCF. The general way of using these
parameters is:
LOAD <driver name> <PARAMETER NAME>... <PARAMETER NAME[=VALUE]>
Example:
LOAD <driver name> TURBO SLOT=16 FRAME=Ethernet_802.2
------------------------------------------------------------------
NOTE that wrong values (such as 'line_speed=128') are IGNORED, and
a default value is taken instead.
------------------------------------------------------------------
Driver specific parameters list (as for NetWare standard parameters,
please see the NetWare user's manual):
TP selects TP port.
TP_NO_LINK_TEST selects twisted pair connection, but disables
the LINK test for specific HUBs that do not
support LINK.
TP_FULL_DUPLEX selects twisted pair connection to work in
full duplex mode.
TURBO Fixes the problem of multiple transmit
underflows and receive overflows (i.e. lose
of packets) in systems that use certain PCI
chipsets.
LINE_SPEED selects line speed between 10MPBs and 100MBPs.
Format: LINE_SPEED=<value>
Allowed values are: 10,100
GENERAL_PURPOSE_CONTROL
user override of the control value in the
GENERAL_PURPOSE register.
Normally, this value should not be changed.
Format: GENERAL_PURPOSE_CONTROL=<Hexadecimal Value>
Allowed values: in the range 1FF-0 hex.
GENERAL_PURPOSE_DATA user override of the data value in the
GENERAL_PURPOSE register.
Normally, this value should not be
changed.
Format: GENERAL_PURPOSE_DATA=<Hexadecimal Value>
Allowed values: in the range 1FF-0 hex.
Client32Win run in Client32 environment for windows
Client32DOS run in Client32 environment for DOS
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.