Windows XP Introduction: ------------- This document describes the procedure to install Windows XP driver for 10/100M PCI Fast Ethernet Adapter. Location of Driver: \WINXP\R8139N51.SYS Installing driver procedure on Microsoft Windows XP: ----------------------------------------------------- Before you start with the installation process, make sure that your adapter should be properly installed in your PCI bus slot. Executing Windows XP, it will auto-detect your system configuration and find the adapter hardware. ( If Windows XP does not prompt that it detects the PCI Ethernet adapter,there must be something wrong with the 10/100M PCI Fast Ethernet Adapter or your system enviroment.) 1. Ask you to select which driver you want to install, select "Driver from disk provided by hardware manufacturer". 2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and specify the setup file pathname A:\WinXP. 3. Windows XP will appear some messages to insert Windows XP system disk to complete setup step. 4. Windows XP will finish the other installation procedure automatically, then you restart the system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.