# version of .INI file XXYY XX:major version, YY:minor version 0100 # Network card description SN3200 # Type of NIC 1 # name for 'Link Driver' in netx.cfg PCIODI # name for 'DriverName' in protocol.ini PCIND # file name for AMI's Card Service program AICARD29.EXE # path for .CLB for CardSoft A:\IBMPC\INSTALL\CARDSOFT\DLINK.CLB # ipxXXXXX.com (IPX driver) IPXDE65N.COM # ODI driver name PCIODI.COM # path for .NIF file for MicroSoft.(LANMAN) A:\DRIVERS\NIF\SN3200.NIF # path for DISK1 A:\DISK1 # path for .NIF file for IBM.(LSP) A:\NDIS\LAN_S4\OEMSETUP.NIF # # number of NOSs supported 20 # content of NOS 1 # description Persional NetWare # default target directory C:\NWCLIENT # type 0 # flag 1 # content of NOS 2 # description Novell Netware 3.x, 4.x # default target directory C:\NWCLIENT # type 1 # flag 0 # content of NOS 3 # description IBM PC LAN Support program # default target directory C:\LSP # type 2 # flag 1 # content of NOS 4 # description LAN Manager # default target directory C:\LANMAN.DOS # type 3 # flag 0 # content of NOS 5 # description Packet Driver # default target directory C:\TCPIP # type 4 # flag 0 # content of NOS 6 # description Windows for Workgroup 3.1 # default target directory C:\WFW # type 5 # flag 0 # content of NOS 7 # description Windows for Workgroup 3.11 # default target directory C:\WFW # type 6 # flag 0 # content of NOS 8 # description Windows NT v3.5 # default target directory C:\WINNT35 # type 7 # flag 0 # content of NOS 9 # description Artisoft LANtastic/AI # default target directory C:\LANTASTI # type 8 # flag 1 # content of NOS 10 # description Artisoft LANtastic/AI # default target directory C:\LANTASTI # type 9 # flag 1 # content of NOS 11 # description IBM LAN WorkPlace # default target directory C:\WNNT35 # type 10 # flag 0 # content of NOS 12 # description IBM LAN WorkPlace # default target directory C:\WNNT35 # type 11 # flag 0 # content of NOS 13 # description IBM LAN WorkPlace # default target directory C:\WNNT35 # type 12 # flag 0 # content of NOS 14 # description Banyan VINES # default target directory C:\LANTASTI # type 13 # flag 1 # content of NOS 15 # description NCSA TCP/IP # default target directory C:\LANTASTI # type 14 # flag 0 # content of NOS 16 # description FTP PC/TCP # default target directory C:\DLINK # type 15 # flag 0 # content of NOS 17 # description Sun PC-NFS # default target directory C:\NFS # type 16 # flag 1 # content of NOS 18 # description Wollongong WIN/TCP # default target directory C:\LANMAN # type 17 # flag 1 # content of NOS 19 # description IBM TCP/IP # default target directory C:\DLINK # type 18 # flag 0 # content of NOS 20 # description DEC DECnet/PATHWORKS # default target directory C:\LANMAN # type 19 # flag 1 # number of NOS operation types 10 # jobs for NOS operation 1 # NETWARE Personal NetWare # type 1 # flag 0 # files for NOS # number of files 2 # file name list A:\NWCLIENT\DOS\PCIODI.COM A:\NWCLIENT\DOS\PCIODI.INS # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # jobs for NOS operation 2 # NETWARE ODI DOS workstation # type 2 # flag 0 # files for NOS # number of files 2 # file name list A:\NWCLIENT\DOS\PCIODI.COM A:\NWCLIENT\DOS\PCIODI.INS # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZLSL # &ZPCIODI.COM # &ZIPXODI # &Z&F # Jobs for NOS operation 3 # IBM PC LAN Support Program # type 3 # flag 0 # files for NOS # number of files 2 # file name list A:\NDIS\DOS\LAN_S23\PCIND.DOS A:\NDIS\DOS\LAN_S23\SN3200.NIF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # Jobs for NOS operation 4 # MS LAN Manager # type 4 # flag 0 # files for NOS # number of files 3 # file name list A:\MSLANMAN.DOS\DRIVERS\ETHERNET\SN3200\PROTOCOL.INI A:\MSLANMAN.DOS\DRIVERS\ETHERNET\SN3200\PCIND.DOS A:\MSLANMAN.DOS\DRIVERS\NIF\SN3200.NIF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZPCIPD.COM # Jobs for NOS operation 5 # Packet Driver # type 5 # flag 0 # files for NOS # number of files 1 # file name list A:\PKTDRV\PCIPKT.COM # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 1 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell &ZPCIPKT.COM 0x60 # Jobs for NOS operation 6 # Windows for Workgroup 3.1 # type 6 # flag 0 # files for NOS # number of files 2 # file name list A:\WFW31\PCIND.DOS A:\WFW31\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # Jobs for NOS operation 7 # Windows for Workgroup 3.11 # type 7 # flag 0 # files for NOS # number of files 4 # file name list A:\WFW311\PCIND.386 A:\WFW311\PCIND.DOS A:\WFW311\PCIODI.COM A:\WFW311\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # Jobs for NOS operation 8 # Windows NT v3.5 # type 8 # flag 0 # files for NOS # number of files 2 # file name list A:\WINNT35\PCIND.SYS A:\WINNT35\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # Jobs for NOS operation 9 # LANtasti /AI # type 9 # flag 0 # files for NOS # number of files 2 # file name list A:\MSLANMAN.DOS\DRIVERS\ETHERNET\SN3200\PROTOCOL.INI A:\MSLANMAN.DOS\DRIVERS\ETHERNET\SN3200\PCIND.DOS # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZDE-65N # &ZNBIOS # Jobs for NOS operation 10 # LANtasti /AI # type 10 # flag 0 # files for NOS # number of files 1 # file name list A:\LANTAS5\PCILAN5.EXE # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZDE-65N # &ZNBIOS # jobs for NOS operation 11 # NETWARE IPX workstation # type 11 # flag 0 # files for NOS # number of files 3 # file name list A:\NWCLIENT\DOS\PCIODI.COM A:\NWCLIENT\DOS\PCIODI.INS A:\NWCLIENT\DOS\NET.CFG # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 2 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell &ZIPXDE65N.COM &Z&F # Jobs for NOS operation 12 # PC-NFS # type 12 # flag 0 # files for NOS # number of files 4 # file name list A:\IBMPC\INSTALL4\DCD16.EXE A:\IBMPC\PKTDRV\DE65NPD.SYS A:\IBMPC\PKTDRV\PDNFS.SYS A:\IBMPC\PKTDRV\README.DOC # update config.sys # number of line added to config.sys 2 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D DEVICE=&ZDE65NPD.SYS -d -w 0x62 &A 0x&B 0x&C # update autoexec.sys # number of line added to autoexec.bat 0 # Jobs for NOS operation 13 # Unimplement NOS # type 99 # flag 0 # files for NOS # number of files 1 # file name list A:\IBMPC\INSTALL\DCD16.EXE #A:\IBMPC\INSTALL3\DCD16.EXE # update config.sys # number of line added to config.sys 1 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.