************************************************************
************************************************************
*
* Intel(R) Ultra ATA Storage Driver for Microsoft* Windows*
* 98, Windows 98 Second Edition, Windows Millennium
* Edition, Windows NT* 4.0, Windows 2000, and Windows XP
* Installation Readme
*
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************
************************************************************
* Intel is making no claims of usability, efficacy or
* warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
* herein completely defines the license and use of this
* software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. System Requirements
3. Localized Language Abbreviations
4. Installing the Software
5. Verifying Installation of the Software
6. Advanced Installation Instructions
7. Identifying the Software Version Number
8. Uninstalling the Software
9. Intel(R) Ultra ATA Companion Application
************************************************************
* 1. OVERVIEW
************************************************************
The Intel(R) Ultra ATA Storage Driver automatically enables
fast Ultra ATA transfers for a variety of ATA/ATAPI mass
storage devices such as hard disk drives and CD-ROMs. The
driver also allows for independent device timings on each
ATA channel. This driver has been architected to take
advantage of the latest Intel Ultra ATA controller features
to improve both storage subsystem performance and overall
system performance. Driver installation is fully automated
for Microsoft* Windows* 98, Windows 98 Second Edition,
Windows Millennium Edition, Windows NT* 4.0, Windows 2000,
and Windows XP.
************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain the following Intel product:
Intel(R) 82801AA, 82801AB, or 82801BA I/O Controller
Hubs.
2. The kit software should be installed on systems with at
least the minumum system memory required by the operating
system.
3. Microsoft* Windows* 98, Windows 98 Second Edition,
Windows Millennium Edition, Windows NT* 4.0,
Windows 2000, or Windows XP.
4. Installation of the Intel(R) Chipset Software
Installation Utility prior to loading the Intel(R) Ultra
ATA Storage Driver.
************************************************************
* 3. LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************
The following list contains the abbreviations of all
languages into which the driver has been localized. You may
have to refer to this section while using this document.
chs -> Simplified Chinese
cht -> Traditional Chinese
dan -> Danish
deu -> German
eng -> International English
enu -> English
esp -> Spanish
fin -> Finnish
fra -> French
frc -> French Canadian
ita -> Italian
jpn -> Japanese
kor -> Korean
nld -> Dutch
nor -> Norwegian
plk -> Polish
ptb -> Brazilian Portuguese
ptg -> Portuguese
rus -> Russian
sve -> Swedish
tha -> Thai
************************************************************
* 4. INSTALLING THE SOFTWARE
************************************************************
General Installation Notes:
1. The operating system and the Intel(R) Chipset Software
Installation Utility must be installed on the system
prior to installation.
2. Click on the self-extracting and self-installing setup
file and answer all prompts presented.
3. You will be prompted to reboot when installation is
complete.
Note:
By default, all general files (README.TXT, etc.) are copied
to the path <bootdrive>:\Program Files\Intel\Ultra ATA
Storage Driver
INSTALLSHIELD* (AUTOMATED) INSTALL FROM HARD DRIVE OR
CD-ROM
1. Download the Intel(R) Ultra ATA Storage Driver setup file
from the Web and double-click to self-extract and to
begin the setup process.
2. The Welcome window appears. Click on the Next button to
continue.
3. The Software License Agreement window appears. Click on
the Yes button and the driver begins to install.
4. The Setup Complete window appears. Select "Yes, I
want to restart my computer now" and click on the Finish
button.
5. To verify if the driver has been loaded correctly, refer
to Section 5.
************************************************************
* 5. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1. The verification of the driver is different on a per
operating system basis. Please refer to the correct
operating system subsection for details.
A. Microsoft* Windows* 98, Windows 98 Second
Edition, and Windows Millennium Edition
* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Device Manager' tab
* Select the 'Intel 82801xx Ultra ATA Controller' listed,
where xx in 82801xx represents the controller identified
by the 'System Requirements' section of this document
* Select the 'Properties' button
* Select the 'Driver' tab
* Select the 'Driver Details' button
* 'INTELATA.MPD' and 'INTELVSD.VXD' should be
displayed
B. Microsoft* Windows* NT* 4.0
* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'SCSI Adapters'
* Select the 'Devices' tab
* 'IntelATA' or 'Intel Ultra ATA Controller'
should be displayed
C. Microsoft* Windows* 2000
* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Select the 'Intel 82801XX Ultra ATA Controller'
listed, where XX in 82801XX represents the
controller identified by the 'System Requirements'
section of this document.
* Select the 'Properties' button
* Select the 'Driver' tab
* Select the 'Driver Details' button
* 'IdeChnDr.SYS' should be displayed
D. Microsoft* Windows* XP
* Run 'Start' then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Select the 'Intel 82801XX Ultra ATA Controller'
listed, where XX in 82801XX represents the
controller identified by the 'System Requirements'
section of this document.
* Select the 'Properties' button
* Select the 'Driver' tab
* Select the 'Driver Details' button
* 'IdeChnDr.SYS' should be displayed
************************************************************
* 6. ADVANCED INSTALLATION INSTRUCTIONS
************************************************************
The following SETUP flags are available:
-? Help information for the setup flags
(shown below)
-S Silent install (no user prompts)
-B Forces a system reboot after installation
-P <path> Supplies target installation path
-A Extracts all driver files (does not install
driver) to <path> if -P is also supplied, or
the default directory otherwise
-N Installs all components except driver
-O <name> Supplies target Start Menu Program Folder
name if installing Companion applet
-L <number> Forces a particular language install (See
the product documentation for a table
mapping <number> to language)
-build Displays build number
-nocompanion Prevents the installation of the Companion
application
-f2 <path\name> Creates a log file in <path> with <name>;
this is to be used during silent
installation.
*** "Package-for-the-web" requires that an additional -A be
placed before any flag. Therefore, an example file
extraction would be IATA_CD -A -A -P C:\<path> ***
Notes: Flags and their parameters are not case sensitive.
Flags may be supplied in any order, with the
exception of the -S and -L flags which must be
supplied last. When using the -A flag, a target
path may be specified via the -P flag, and the -O,
-L, -S, and -N flags are ignored. When using the -P
or -O flags, a space is required between the flag
and the argument; when using -L and -f2, however,
there should be no space. When using the -f2 flag,
a log file name and path must be specified.
To load just the driver as outlined in the Microsoft*
document, "Deployment Guide Automating Windows NT Setup,"
use the supplied TXTSETUP.OEM file included in this
package and insert the lines below into the UNATTEND.TXT
file. This method is available for both Microsoft* Windows*
NT* 4.0, Windows 2000, and Windows XP. (For Windows NT 4.0,
the TXTSETUP.OEM, INTELATA.INF, and INTELATA.SYS file need to
first be extracted from the compressed .CAB file. For
Windows 2000 and Windows XP, the idechndr.inf, IdeBusDr.sys,
idechndr.sys, and Txtsetup.oem files need to be extracted.
To extract these files, run 'SETUP -A -P <path>' as described
above.)
Microsoft Windows NT 4.0:
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel Ultra ATA Controller" = OEM
[OEMBootFiles]
INTELATA.INF
INTELATA.SYS
TXTSETUP.OEM
Microsoft Windows 2000 and Windows XP:
// Insert the lines below into the UNATTEND.TXT file
[MassStorageDrivers]
"Intel(r) 82801BA Ultra ATA Controller" = OEM
"Primary IDE Channel" = OEM
"Secondary IDE Channel" = OEM
[OEMBootFiles]
idechndr.inf
IdeBusDr.sys
IdeChnDr.sys
Txtsetup.oem
The IprtCnst.dll file must be placed in the following
folder in your directory structure in order to be loaded
during driver installation:
C:\I386\$Oem$\$$\System32
Please refer to the following Microsoft Knowledge Base
article for information on why the file cannot be listed
in the [OEMBootFiles] location in the unattend.txt
file:
http://support.microsoft.com/support/kb/articles/Q275
/3/34.ASP?LN=EN-US&SD=gn&FR=0&qry=Q275334&rnk=1&src=
DHCS_MSPSS_gn_SRCH&SPR=CHS
************************************************************
* 7. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
For all operation systems, please follow the instructions
presented to correctly identify the software version number.
1. Click on the Start button. Open the Programs menu. Open
the Intel(R) Ultra ATA Storage Driver menu. Click on the
Companion Application.
2. The Companion application appears. Observe the Storage
Driver Kit Build number and the Version number within the
right window of the Device Parameters tab dialog box.
************************************************************
* 8. UNINSTALLING THE SOFTWARE
************************************************************
NOTE: This procedure assumes that the above installation
process was successful. This un-installation procedure
is specific only to the version of the driver and
installation file included in this package.
1. Click on the Start button. Open the Settings menu.
Click on the Control Panel icon to open the Control Panel
window.
2. Double click on the Add/Remove programs icon.
3. Select Intel(R) Ultra ATA Storage Driver and click OK.
4. Click on Yes when the script prompts for confirmation.
5. The uninstall script will prompt you to restart the
system.
Uninstall procedure for Windows NT 4.0:
NOTE: This procedure assumes that the above un-installation
procedure is not applicable.
1. Click on the Start button. Open the Settings menu.
Click on the Control Panel icon to open the Control Panel
window.
2. Double click on the SCSI Adapters tab.
3. Select the Drivers tab.
4. Select 'Intel Ultra ATA Controller' and then select the
Remove button.
5. Select the Add button and choose the default driver
'IDE CD-ROM (ATAPI 1.2)/Dual-Channel PCI IDE Controller'.
6. Choose OK and select Yes to restart your system.
************************************************************
* 9. INTEL(R) ULTRA ATA COMPANION APPLICATION
************************************************************
Overview
By default, running the SETUP program creates a Start Menu
Program Folder named, "Intel Ultra ATA Storage," which
contains shortcuts to the Intel(R) Ultra ATA Companion
Application, the Companion's Help file, and the driver
package README.TXT file.
The Intel(R) Ultra ATA Companion is a Win32 application that
works in tandem with the Intel(R) Ultra ATA Storage Driver to
provide detailed, useful information about the storage
subsystem. The Companion queries the Intel(R) Ultra ATA
Storage Driver via its IOCTL interface to obtain detailed
Ultra ATA Controller and device information, which is
displayed on the screen and can be dumped to a log file. The
Companion can also be used to set a particular ATA or ATAPI
device's transfer mode limit (described in detail below).
Displaying Controller and/or Device Information
When started, the Companion's left window (the "Devices"
window) contains entries for the Intel Ultra ATA controller
and all connected ATA/ATAPI devices. Selecting a particular
controller or device in the Devices windows causes the
application to display the corresponding configuration
parameters in the Companion's right window (the "Parameters"
window). Parameters shown with an oscilloscope icon are
read-only; parameters shown with a wrench icon are read-
write.
The various parameters are described below:
Controller Parameters:
Name Description
IDE Controller Controller product name
Driver Build Device driver product name
Driver Version Device driver version
VxD Build (1) VSD device driver product name
VxD Version (1) VSD device driver version
IDE Controller Tri-State Reports if controller is tri-
stated
PIO Mode Support PIO modes supported by controller
DMA SW Mode Support Single-word DMA modes supported
by controller
DMA MW Mode Support Multi-word DMA modes supported
by controller
UDMA Mode Support Ultra DMA modes supported by
controller
Timeout Value (2) Reports command timeout value
Flush Enable (2) Reports if run-time disk cache
write flush is enabled
Storage Kit Build(s) Reports what kit is installed
Storage Report tab Reports basic information
Device Parameters:
Name Description
Model Device model name
Firmware Device firmware revision
Serial # Device serial number
Device Type Reports type of device (ATA -
fixed, ATAPI - removable, etc.)
PIO Mode Support PIO modes supported by device
DMA SW Mode Support Single-word DMA modes supported
by device
DMA MW Mode Support Multi-word DMA modes supported
by device
UDMA Mode Support Ultra DMA modes supported by
device
LBA (3) Logical Block Address information
CHS (3) Cylinder Head Sector information
CHS sectors (3) Number of CHS sectors
Disk Size (3) Total size of disk
Default Transfer Mode Device's power-up default
transfer mode
Current Transfer Mode Device's current, configured
transfer mode
Transfer Mode Limit Used to limit Current Transfer
Mode, applies to any device
connected to that cable position
Cable Type (Host) Reports if system BIOS recognizes
the device is connected via a
40- or 80-conductor ATA cable
Notes:
(1) Only displayed on Microsoft* Windows* 98 and
Windows Millennium Edition
(2) Only displayed on Microsoft* Windows* NT* 4.0
(3) Only displayed for ATA fixed disk drive devices
How to Change a Device's Maximum ATA Transfer Mode
NOTE: The Intel(R) Ultra ATA Storage Driver automatically
configures devices for their optimal transfer modes;
changing the default "No Limit" setting may cause adverse
system effects.
At system boot, the Intel(R) Ultra ATA Storage Driver
configures each ATA/ATAPI device to transfer data at
particular transfer modes. These transfer modes are defined
by ATA standards, and are either Programmed I/O (PIO) or
Direct Memory Access (DMA or UltraDMA) type transfers. The
Intel(R) Ultra ATA Storage Driver usually configures devices
for their fastest capable transfer modes; however, there may
be times when a different (perhaps slower) transfer mode is
appropriate for a particular device or system configuration.
To change a particular device's maximum configurable transfer
mode, the device's Transfer Mode Limit parameter can be set
to a value other than "No Limit."
To change the value of this parameter, first select the
target device in the Devices window. Next, double-click
the parameter name "Transfer Mode Limit" in the Parameters
window - this causes the "Edit Value" dialog box to
appear. Next, choose a value in the "Parameter Data"
pulldown and select "OK" to change the value. This change
will cause the Transfer Mode Limit parameter wrench icon
to flash, indicating that its value has been changed.
The parameter value change does not take effect, however,
until the "File/Commit Changes Now" is selected, or the
application is shut down (at which point, the application
will prompt the user to "Commit Changes Now"). Whenever a
device's transfer mode limit is changed, the change will not
take effect until the system is restarted.
The Save/Print/View Report Feature
Open the Intel(R) Ultra ATA Companion Application and select
"File" then "Storage Report", next choose either "Save",
"Print", or "View". The text report of the storage subsystem
contains a variety of detailed information pertaining to
the storage subsystem, including: operating system
information; system registry information; platform
information; driver information; controller information
including a hex dump of PCI configuration register values;
channel information; and device information including a hex
dump of each device's IdentifyDrive/IdentifyPacketDevice
data.
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM/IHV/ISV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do
not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you
do not wish to so agree, do not install or use the Software.
Please Also Note:
* If you are an Original Equipment Manufacturer (OEM),
Independent Hardware Vendor (IHV), or Independent Software
Vendor (ISV) this complete LICENSE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
SOFTWARE LICENSE AGREEMENT, applies.
------------------------------------------------------------
For OEMs, IHVs, and ISVs:
LICENSE. This Software is licensed for use only in
conjunction with Intel component products. Use of the
Software in conjunction with non-Intel component products
is not Licensed hereunder. Subject to the terms of this
Agreement, Intel grants to You a nonexclusive,
nontransferable, worldwide, fully paid-up license under
Intel's copyrights to:
a) use, modify, and copy Software internally for Your own
development and maintenance purposes; and
b) modify, copy and distribute Software, including
derivative works of the Software, to Your end-users,
but only under a license agreement with terms at least
as restrictive as those contained in Intel's Final,
Single-User License Agreement, attached as Exhibit A;
and
c) modify, copy and distribute the end-user documentation
that may accompany the Software, but only in
association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.
Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect Your
relevant records to verify Your compliance with the terms
and conditions of this Agreement.
CONFIDENTIALITY. If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software, You
shall obtain a written confidentiality agreement from the
Contractor that contains terms and obligations with respect
to access to or use of Software no less restrictive than
those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's prior
written consent. You do not have any rights to use any Intel
trademarks or logos.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052, USA.
------------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do
not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you
do not wish to so agree, do not install or use the Software.
LICENSE. You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction
with Intel component products. Use of the Software in
conjunction with non-Intel components is not licensed
hereunder.
2. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in
this Agreement, and you agree to prevent unauthorized
copying of the Software.
3. You may not reverse-engineer, decompile or disassemble
the Software.
4. You may not sublicense or permit simultaneous use of the
Software by more than one user.
5. The Software may contain the software or other property
of third-party suppliers, some of which may be identified
in, and licensed in accordance with, any enclosed
"license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052, USA.
SLAOEMISV1/RBK/January 21, 2000
************************************************************
* DISCLAIMER
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 2001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.