1. Token_Ring_3137.zip Driver
2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (Token_Ring_3137.zip)

[disks]
    1 =\mslanman.dos\drivers\tokenrng\olitok16 ,"OC-3869 Driver Disk ",disk1

[netcard]
;   key = description, MSID, type, media, mode, install, protini
;       key:            unique identifier
;       description:    text description in quotes
;       MSID:           card detection id (see carddefs.h)
;       type:           ndis|ndis_sngl|mono
;       media:          arcnet|baseband|broadband|ethernet|fddi|tokenring
;       mode:           real|vxd
;       install:        section name of install script
;       protini:        section name of protocol.ini script
;
;
; The cards are organised in alphabetical order according to the name
; of the card.  Make sure you keep them in order if you add a new card

oli164a="Olicom Token-Ring Network 16/4 Adapter ",0,ndis,tokenring,real,oli164a,oli164a_nif

[oli164a]
devdir= 1:olitok16.dos
device=olitok16.dos,@devdir\olitok16.dos

[oli164a_nif]
drivername=OLITOK$
param=IoBase,"I/O Base Address",hex,"0x020,0xffe0,0x20",,0x02
param=MaxRequests,"Maximum General Requests",int,"1,10,1",6
param=MaxTransmits,"Maximum Transmits",int,"2,6,1",4
param=RecBufSize,"Receive Buffer Size",int,"256,5080,8",504
param=RecBufCount,"Receive Buffer Count",int,"2,30,1",10
param=MaxFrameSize,"Maximum Frame Size", int,"512,17954,1",,0x02
param=EarlyRelease,"Early Token Release",text,"yes,no",yes
param=NetAddress,"Net Address",chars,14,,0x0a
param=ReOpen,"ReOpen adapter on lobe faults",text,"yes,no",no
param=FrameStatus,"FrameStatus",text,"yes,no",yes
param=TxBufferSize,"PC TransmitBufferSize", int,"2,20,1",,0x02
param=NDIS201,"Disable NDIS 2.02 support",keyonly,,,0x02