README.TXT Driver File Contents (

          K7E/B BIOS V4.1LCP release note.
This disk contains three files:K7B_V41.BIN,README.TXT and AWDFLASH.EXE

1.The checksum of K7B_V41.BIN is 429B(Hex) ;

2. How to use AWDFLASH.EXE utility:
   This is a flash memory write/read utility.
   The AWDFLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the AWDFLASH utility.
      AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
     BIOSfile1: New BIOS Name For FLASH Programming
     BIOSfile2: BIOS File For Backing-up the Original BIOS

 <command> function definition:
      /cc: clear CMOS;        /cp: clear PnP;        /cd: clear DMI.
      /sn: No Original BIOS Backup. If this option is chosen:
         Be sure your new BIOS is compatible with your M/B. If not, the system 
         are damaged.
      /sy: Backup Original BIOS to Disk File.
        AWDFLASH ****.BIN /py/sn/cd/cp

   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!

UPDATE DATE:01/08/2004
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.10