ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Installation for LANtastic v 6.0 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1. Install LANtastic 6.0 as instructed by Artisoft. When you are asked to
select a network driver, choose "NDIS SUPPORT FOR NETWORK ADAPTERS".
Afterwards, insert the driver disk in drive 'B' and type its path when
asked for the NDIS Driver Directory: B:\NDIS2
2. When you finish the installation, review the following files to make sure
that it contains the appropriate commands:
\CONFIG.SYS
===========
:
Device=c:\lantasti\protman.dos /i:c:\lantasti
Device=c:\lantasti\UM9008.DOS
\AUTOEXEC.BAT
=============
:
call c:\lantasti\startnet.bat
\LANTASTI\STARTNET.BAT
======================
:
Loadhigh AI-NDIS Bind_To=UN9008_NIF
AILANBIO @Startnet.cfg
:
\LANTASTI\PROTOCOL.INI
======================
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
[UM9008_NIF]
Drivername = UM9008$
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.