If you want to see the text on your screen, click Edit and select Word Wrap. What You Need To flash your modem to the V.90 protocol, download the flasher file, and have your Diamond K56flex modem installed on your Windows NT 4.0 computer. If you have an external modem, turn it on. NOTE: If you find parts of these instructions confusing or lacking information, and have suggestions about how to remedy the text, send your comments to us at email@example.com. How to Update Your Modem in Windows NT 4.0 There are 3 steps to upgrade your modem to V.90. The details of each step are listed in the sections below. If you find you need to flash back to K56flex, those instructions are at the end. NOTE: If you use this flasher to flash your modem back to K56flex, it will flash it to the most recent version of K56flex firmware. The flasher will not restore the version of firmware that you had on your modem before you flashed to V.90. 1. Download and open the flasher and driver file. 2. Flash your modem with the V.90 flasher. 3. Update your Modem in Windows. Downloading and Opening the Flasher and Driver File 1. Download the file. 2. Double-click the file to extract the archive, and remember where you’ve placed the files. You’ll need to come back to this location 2 times. Flashing Your Modem with V.90 1. Exit any software that may be using your modem, for example, fax software or your online software. 2. Double-click the flasher file (.exe) you just extracted. 3. If you know which COM port your modem is on, select it and write down the name of your modem as it is displayed next to the COM port display. If you don’t know which COM port your modem is on, click Search and the flasher will find your modem. Write down the name of the modem as it is displayed next to the COM port display. 4. Click the Flash V90 button. You’ll see a thermometer showing progress as the flasher is updating your modem. You’ll be able to tell when the flasher is finished. You may see some cryptic-looking commands like ATFW or OK. 5. Click Quit NOTE: If this is the first time you’re flashing to V.90, continue with the next section, Updating Your Modem in Windows NT 4.0. If this is the second time you’re flashing to V.90, and you’ve completed the following section, Updating Your Modem in Windows NT 4.0, stop here. Updating Your Modem in Windows NT 4.0 It is important that you complete the following steps in the order in which they appear. Removing Your Old Modem Drivers From Your Winnt Directory 1. Click Start, Programs, Accessories, HyperTerminal. If you don’t have HyperTerminal, you can install it from the Windows NT 4.0 CD-ROM, or use another terminal program. 2. Make sure HyperTerminal is communicating with the modem you want to upgrade, then type ATi92 [Enter]. Write down the SUP#### number you see (for example, SUP2051). Quit HyperTerminal. 3. Click Start, select Find, Files or Folders. 4. Leave the Named field blank. 5. In the Look in field, Browse to C:\Winnt\Inf, and click OK after you’ve highlighted the folder. NOTE: Step 8 assumes that when you installed Windows NT 4.0, you allowed the default name of your system directory to be Winnt. If you changed the name of the directory, substitute that name in place of Winnt in Step 8. 6. Click the Advanced tab. 7. The Of type field should say All Files and Folders. 8. In the Containing text field, type the SUP#### number you wrote down for your modem. 9. Click the Find Now button, and Windows will find the files for your modem. 10. Check the three-letter extensions of the file names. Delete the files that end in ".inf". You may have to widen the column to see the entire filename (put your cursor over the column divider at the top of the results table). NOTE: You can double-check which files to delete by opening them and looking for references to a Diamond Modem. They may look a bit cryptic, but you’ll be able to understand some of it. If your files don’t have the three-letter extension, • open Windows NT Explorer (Start > Programs > Windows NT Explorer) • from the View menu select Options • click the View tab • make sure Show all files is selected • make sure that Hide extensions for known file types is not selected • click OK • close Windows NT Explorer • click the Find Now button to update the display of the files that were located, you should see which ones have .inf after them now 11. Close the Find window. You’ve removed your modem’s drivers. Next remove your modem from the Control Panel. Continue with the next section. Removing Your Modem From The Modems Control Panel 1. From the Control Panel, double-click Modems. 2. Select your modem name. If you have trouble finding your modem, select a name that’s similar to what you wrote down in Step 3 in ”Flashing Your Modem with V.90”. 3. Click Remove. Click OK if you are asked to confirm removing your modem. Click Close. You’ve removed the modem from the Control Panel. Next restart the computer so you can set up the updated modem with your operating system. Rebooting Your Computer 1. Close any applications you have open on your computer. 2. Restart your computer. 3. Beginning at Start, select Control Panel, and double-click Modems. If you don’t see a message asking you to Install a New Modem, click the Add button. Follow the instructions for installing your new modem. If you need help, see the installation manual that came with your modem. Updating Applications You Use With Your Modem After you’ve flashed your modem to V.90, you need to check the modem setup sections in the applications which use your modem, and tell them look for your "new" modem. Because Windows saw it as a "new" modem, so will any software you use with it. Flashing Back to K56flex If you find a reason to flash back to K56flex, follow the instructions below. When you flash back to K56flex, it is not necessary to follow the instructions in Updating Your Modem in Windows NT 4.0. 1. Exit any software that may be using your modem, for example, fax software or online software. 2. Double-click the flasher. 3. If you know which COM port your modem is on, select it. If you don’t know which COM port your modem is on, click Search and the flasher will find your modem. 4. Click the Flash K56 button. You’ll see a thermometer showing progress as the flasher is updating your modem. You’ll be able to tell when the flasher is finished. You may see some cryptic-looking commands like ATFW or OK. 5. Click Quit There is nothing else you must do for your modem to function as a K56flex modem. Do not follow the instructions in Updating Your Modem in Windows NT 4.0.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.