1. 5020.zip Driver
2. readme_en.txt File Contents

readme_en.txt Driver File Contents (5020.zip)

If the capacity of the batteries is not displayed correctly, please update the firmware of your camera.


If you own a PC with a cardreader, please follow this instructions:
1. Download the firmware (update.zip) attached below and unpack the files. 
2. Make sure the camera is connected to your AC adaptor, and the adaptor is plugged in.
3. Insert the SD-card in the cardreader in your PC.
4. Copy image.bin to root directory of SD card (the name must be 'image.bin')
5. Switch the camera to 'Auto'- mode
6. Put the SD-card in the camera
7. Switch on the camera
8. Insert SD card and make sure that SD mark showing on the LCD 
9. Power off camera and wait about 15 seconds. 
10. If LCD backlight flash, than the update has succeeded. 
11. If LCD backlight no flash after 15 seconds. Please do all process again. 
12. Please remove AC adaptor and battery and wait for 15 seconds.
13. Insert AC adaptor or put in battery.
14. When you power on again, it is new firmware version.
Note: If you had try two times fail in the same card, please use another new SD card and try again



If you don't own a PC with a cardreader, please follow this instructions:
1. Download the firmware (update.zip) attached below and unpack the files. 
2. Make sure the camera is connected to your AC adaptor, and the adaptor is plugged in.
3. Make sure the SD-card is in the camera.
4. Switch the camera to 'Auto'- mode
5. Switch on the camera
6. Connect the camera to your PC and copy the firmware (image.bin) to the root directory of the camera 
7. Disconnect the camera from the PC
8. Power off camera and wait about 15 seconds. 
9. If LCD backlight flash, than the update has succeeded.
10. If LCD backlight no flash after 15 seconds. Please do all process again. 
11. Please remove AC adaptor and battery and wait for 15 seconds.
12. Insert AC adaptor or put in battery.
13. When you power on again, it is new firmware version.
Note: If you had try two times fail in the same card, please use another new SD card and try again