Anleitung zum Firmwareupdate Version 1032 für Toshiba SD-R6372 - entpacken Sie die Updatedatei in ein beliebiges Verzeichnis auf der Festplatte. - beenden Sie alle Virenscanner und sonstigen Programme, die im Hintergrund arbeiten - entfernen Sie alle Medien aus den Laufwerken - klicken Sie doppelt auf die Datei SDR6372-1032.exe - lesen Sie sich die englischsprachigen Hinweise durch und klicken dann auf "Agree" - stellen sie sicher, dass das Laufwerk "ODD-DVD SD-R6372" oben ausgewählt ist - Wichtig! Schalten Sie ihren Computer nicht während des Updates aus, und öffnen oder schliessen sie keinesfalls das Laufwerk - wenn Sie bereit sind klicken Sie auf "Update Start" - bestätigen Sie den Beginn des Updates mit Klick auf "Start" - das Laufwerk wird sich unter Umständen öffnen - drücken Sie während des Updates keine Taste und schliessen Sie das Laufwerk nicht - wenn das Update beendet wurde, wird dies durch die Meldung "Firmware update complete" angezeigt - klicken Sie nun auf den "Power off" button - das Notebook wird nun automatisch herunterfahren und sich ausschalten - warten Sie 30 Sekunden, dann schalten Sie das Notebook wieder ein How to update the Firmware of the Toshiba SD-R6372 - unpack the update file to a folder of your choice on the harddisc - close all anti virus tools and all programs that run in the background - remove all media from the drives - double click on the file SDR6372-1032.exe - read the message, then click on "Agree" - make sure that the drive "ODD-DVD SD-R6372" is selected - Important! Do not turn off your computer during the update and do not open or close your drive during the update - if you are ready, click on "Update Start" - confirm the start of the update by pressing the "Start" button - the drive may open automatically - do not press any buttons during the update and do not close the drive - if the update is finished, the message "Firmware update complete" is displayed - click on the "Power off" button - the notebook will shutdown automatically and turn itself off - wait 30 seconds, then restart the notebookDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.