Wlan.ini Driver File Contents (MSI_WLAN.zip)

[Languages]

Language-1=English



[English]



HTTP_ADDR = "http://www.msi.com.tw"

SHOW_LOGO = "YES"

DevicePollingTimerMsec = "3000"



;;;;;;;;;;;;;;;;;;;;;;;;;;

;Tool tips

;;;;;;;;;;;;;;;;;;;;;;;;;;

TOOLTIP1 = "One or more wireless networks are available."

TOOLTIP1-1 = "To see a list of available networks, click here."

TOOLTIP2 = "Connected to: "

TOOLTIP3 = "Signal Strength: "

TOOLTIP4 = "Wireless Connection Unavailable"

TOOLTIP_CONNECT_TITLE = "Wireless Network Connection"



;;;;;;;;;;;;;;;;;;;;;;;;;;

;Popup menu

;;;;;;;;;;;;;;;;;;;;;;;;;;

PopupItem1 = "Language"

PopupItem1-1 = "English"

PopupItem2 = "View Available Wireless Networks"

PopupItem3 = "Exit"

PopupItem4 = "WLAN Cards"

PopupItem5 = "Open Network Connections"

PopupItem6 = "Switch to AP Mode"





;;;;;;;;;;;;;;;;;;;;;;;;;;

;Available Network Dialg

;;;;;;;;;;;;;;;;;;;;;;;;;;

TITLE = "Wireless Network Connection"

AVAILSTATIC1 = "The following wireless networks are available. To access a wireless network, select it from the list, and then click Connect."

AVAILSTATIC2 = "Available wireless networks:"

AVAILSTATIC3 = "This network requires the use of a network key(WEP). To access this network, type the key, and click Connect."

AVAILSTATIC4 = "Network key:"

AVAILSTATIC5 = "If you are having difficulty connecting to a network, click Advanced."

BUTTON1 = "Advanced"

BUTTON2 = "Connect"

BUTTON3 = "Cancel"





;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Main Dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;



DlgTitle = "Wireless Network Connection"

Tab1 = "Wireless Network"

Tab2 = "Status"

Tab3 = "Information"

Tab4 = "AP Config"
IDOK = "OK"

IDCANCEL = "Cancel"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Wireless Network

;;;;;;;;;;;;;;;;;;;;;;;;;;;

WNSTATIC1 = "Available Networks:"

WNSTATIC2 = "To connect to an available network, click Configure."

WNSTATIC3 = "Preferred networks:"

WNSTATIC4 = "Automatically connect to available networks in the order listed below."

IDC_CONFIGURE = "Configure"

IDC_BUTTON2 = "Refresh"

IDC_MOVEUP = "Move up"

IDC_MOVEDOWN = "Move down"

IDC_ADD = "Add..."

IDC_REMOVE = "Remove"

IDC_PROPERTY = "Properties"

IDC_ADVANCED = "Advanced"

ADD_ERROR_AD_HOC1 = "The computer-to-computer network"

ADD_ERROR_AD_HOC2 = "is already configured."

ADD_ERROR_AD_HOC3 = "Please change either the network name or the network type before adding this entry to the preferred list."

ADD_ERROR_INFRA = "The access point network"

ADD_ERROR_TITLE = "Network Connections"

IDC_STATIC_ZERO_1 = "Windows is currently managing this adapter."

IDC_STATIC_ZERO_2 = "To configure this adapter please use the Network Connection Properties."



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Advance

;;;;;;;;;;;;;;;;;;;;;;;;;;;

ADSTATIC1 = "Channel:"

ADSTATIC2 = "Speed:"

ADSTATIC3 = "Radio:"

ADSTATIC4 = "SSID:"

ADSTATIC5 = "MAC address:"

ADSTATIC6 = "IP address:"

ADSTATIC7 = "Sent"

ADSTATIC8 = "Received"

ADSTATIC9 = "Packets:"

ADSTATIC10 = "Signal Strength:"

ADSTATIC11 = "Link Quality:"

IDC_CHANGE = "Change"

IDC_SUBMIT = "Submit"

IDC_CANCEL = "Cancel"

IDC_FIX_IP = "Fix"

QUALITYLEVEL1 = "Excellent"

QUALITYLEVEL2 = "Very Good"

QUALITYLEVEL3 = "Good"

QUALITYLEVEL4 = "Low"

QUALITYLEVEL5 = "Very Low"

QUALITYLEVEL6 = "No Signal"

RADIOON = "On"

RADIOOFF = "Off"

IDC_ADVANCE_SETTING = "Advance..."



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Information

;;;;;;;;;;;;;;;;;;;;;;;;;;;

INSTATIC1 = "MSI Wireless LAN Utility"

INSTATIC2 = "Copyright(C) 2002, MICROSTAR"

INSTATIC3 = "Hardware Information:"

INSTATIC4 = "Board Model:"

INSTATIC5 = "Software Information:"

INSTATIC6 = "Driver Version:"

INSTATIC7 = "Applet Version:"

INSTATIC8 = "Applet Date:"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Association

;;;;;;;;;;;;;;;;;;;;;;;;;;;

ASTITLE = "Association"

ASSTATIC1 = "Network name (SSID):"

ASSTATIC2 = "Wireless network key (WEP)"

ASSTATIC3 = "This network requires a key for the following:"

ASSTATIC4 = "Encryption:"

ASSTATIC5 = "Network Authentication:"

ASSTATIC6 = "Network key:"

ASSTATIC7 = "Key format:"

ASSTATIC8 = "Key length:"

ASSTATIC9 = "Key index (advanced):"

ASSTATIC10 = "The key is provided for me automatically"

ASSTATIC11 = "This is a computer-to-computer (ad hoc) network; wireless access points are not used"

HEXCOMBO1 = "40 bits (10 digits)"

HEXCOMBO2 = "104 bits (26 digits)"

ASCIICOMBO1 = "40 bits (5 characters)"

ASCIICOMBO2 = "104 bits (13 characters)"

FORMAT1 = "Hexadecimal digits"

FORMAT2 = "ASCII characters"

WEP_POSITION_ERROR1 = "The character on position"

WEP_POSITION_ERROR2 = "in the WEP key material is not a hexadecimal digit."

WEP_POSITION_ERROR3 = "Please either change the key format or remove any non hexadecimal characters from the key material text."

WEP_LENGTH_ERROR1 = "The length of WEP key material you entered is"

WEP_LENGTH_ERROR2 = "The required length is"

WEP_LENGTH_ERROR3 = "Please adjust the key material to match exactly the indicated length."

END_QUOTE = "."





;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Advance dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;

AVTITLE = "Advance"

AVSTATIC1 = "Network to access"

IDC_RADIO1 = "Any available network (access point preferred)"

IDC_RADIO2 = "Access point (infrastructure only) networks only"

IDC_RADIO3 = "Computer-to-computer (ad hoc) networks only"

IDC_CHECK1 = "Automatically connect to non-preferred networks"

IDCLOSE = "Close"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Property dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;

PRTITLE = "Wireless Network Properties"

PRSTATIC1 = "Network name:"

PRSTATIC2 = "This is an "ad hoc" network where computers connect directly to each other rather than through a wireless access point"

PRSTATIC3 = "Must use a network password"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Status Advance dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;

STADVTITLE = "Advance Settings"

IDC_ADV_STATIC1 = "Visible site:"

IDC_ADV_STATIC2 = "Fragmentation threshold:"

IDC_ADV_STATIC3 = "RTS threshold:"

IDC_ADV_STATIC4 = "Preamble type:"

IDC_ADV_STATIC5 = "Country:"

IDC_ADV_STATIC6 = "Power save:"

IDC_ADV_STATIC7 = "Restore default value:" 

IDC_ADV_SET_PREAMBLE1 = "Long"

IDC_ADV_SET_PREAMBLE2 = "Auto"

IDC_ADV_SET_COUNTRY1 = "FCC"

IDC_ADV_SET_COUNTRY2 = "ETSI"

IDC_ADV_SET_COUNTRY3 = "SPAIN"

IDC_ADV_SET_COUNTRY4 = "FRANCE"

IDC_ADV_SET_COUNTRY5 = "JAPAN"

IDC_ADV_SET_POWER1 = "Off"

IDC_ADV_SET_POWER2 = "On"

IDC_ADV_COLUMN1 = "SSID"

IDC_ADV_COLUMN2 = "Channel"

IDC_ADV_COLUMN3 = "Signal Strength(dBm)"

IDC_ADV_COLUMN4 = "WEP"

IDC_ADV_COLUMN5 = "MAC Address"

IDC_ADV_COLUMN6 = "Authentication"

IDC_ADV_COLUMN7 = "Encryption"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Quit Warning Dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;

QUITWARNIG = "Do you really want to close the tray application?"

QUITWARNIG_TITLE = "Warning"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; XP detection

;;;;;;;;;;;;;;;;;;;;;;;;;;;

XP_DETECT_DIALOG1 = "If you want to use MSI WlanUtility under Windows XP, please uncheck"

XP_DETECT_DIALOG2 = "Use Windows to configure my wireless network settings"





;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Wrong Format Dialog

;;;;;;;;;;;;;;;;;;;;;;;;;;;

WRONG_FORMAT_LINE1 = "The network password needs to be 40bits or 104bits depending on your network configuration."

WRONG_FORMAT_LINE2 = "This can be entered as 5 or 13 ascii characters or 10 or 26 hexdecimal characters."

WRONG_FORMAT_TITLE = "Wireless Configuration"





;;;;;;;;;;;;;;;;;;;;;;;;;;;

; AP config

;;;;;;;;;;;;;;;;;;;;;;;;;;;

IDC_AP_STATE = "Enable AP mode"

IDC_STATIC_AP_SSID = "Network SSID:"

IDC_STATIC_AP_SECURITY = "Security:"

IDC_STATIC_AP_ENCRYPTION = "Encryption:"

IDC_STATIC_AP_AUTHENTICATION = "Authentication:"

IDC_STATIC_AP_KEY = "Key:"

IDC_STATIC_AP_INDEX = "Index:"

IDC_STATIC_AP_ADVANCE_SETTING = "Advance setting:"

IDC_STATIC_AP_RATE = "Rate:"

IDC_STATIC_AP_RATESET = "Basic rateset:"

IDC_STATIC_AP_BAND = "Band:"

IDC_STATIC_AP_CHANNEL = "Channel:"



;;;;;;;;;;;;;;;;;;;;;;;;;;;

; APUtility

;;;;;;;;;;;;;;;;;;;;;;;;;;;

AP_UTILITY_CONFIGURATION = "Launch AP configuration tool"

AP_UTILITY_SWITCH = "Switch to Station mode"



AP_START_STEP1 = "Starting Software AP..."

AP_START_STEP5 = "Finished, clicked here to start AP controller."

AP_STOP_STEP1 = "Switching back to Station mode..."

AP_TITLE = "Software AP Controller"

AP_UTILITY_QUIT = "Exit"

AP_EXIT = "Terminating..."

AP_DEFAULT_SSID = "MSI"

AP_DEFAULT_CHANNEL = "1"

IDC_RADIO_ENABLE_ICS = "Enable IP Sharing"

IDC_RADIO_DISABLE_ICS = "Disable IP Sharing"

IDC_STATIC_IPSHARING1 = "Please select which connection you want to share:"



GW_UTILITY_CONFIGURATION = "Launch Gateway configuration tool"

IP_SHARING_DLGTITLE = "Gateway Setting"

AP_SWITCH_GW_MODE = "Switch to Gateway mode"

AP_SWITCH_AP_MDOE = "Switch to AP mode"

AP_SWITCH_GW_SETTING = "Change Gateway Setting"

GW_TITLE = "Software Gateway Controller"

GW_START_STEP1 = "Starting Software Gateway..."

GW_START_STEP5 = "Finished, clicked here to start Gateway controller."

AP_SAVE_CONFIG = "Save configuration and don't ask me next time"


;;;;;;;;;;;;;;;;
;Authentication
;;;;;;;;;;;;;;;;
Tab5 = "Authentication"

IDC_STATIC_PROFILE = "Profile"
IDC_BUTTON_ADD = "Add"
IDC_BUTTON_DEL = "Delete"
IDC_BUTTON_SAVE = "Save"
IDC_STATIC_AUTHEN_TYPE = "Authentication type"
IDC_STATIC_USER = "User information"
IDC_STATIC_U_NAME = "User name"
IDC_STATIC_U_PW = "Password"
IDC_CHECK_CLIENT_CERT = "Use client certificate"
IDC_BUTTON_CLN_CERT = "Select"
IDC_STATIC_CLN_CERT = "Certificate information"
IDC_STATIC_ISU_TO = "Issue to:"
IDC_STATIC_ISU_BY = "Issue by:"
IDC_STATIC_EXP = "Expire on:"
IDC_STATIC_SERIAL_NO = "Serial No:"
CERTIFICATE_TITLE = "Certificate"
IDC_STATIC_802_1X = "Using 802.1X authentication"
WPA_PASSWORD_WRONG = "The network password needs to be 128bits or 256bits depending on your network configuration. This can be entered as 8 to 63 ascii characters or 64 hexadecimal characters."
WEP_PASSWORD_WRONG = "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters."
NO_SSID_INPUT = "Please enter a network name."
NO_SUPPORT_TKIP_ERROR = "Sorry, your network card does not support TKIP encryption."
NO_SUPPORT_AES_ERROR = "Sorry, your network card does not support AES encryption."

IDC_CHECK_ASKSAVE = "Ask me to save profile"
IDC_NEED_TLS = "Please select a Certificate for TLS!"
IDC_INPUT_PROF_NAME = "Please enter no more than 16 characters for profile name!"
IDC_INPUT_USER_NAME = "Please enter no more than 16 characters for user name!"
IDC_INPUT_USER_PW = "Please enter no more than 16 characters for password!"
IDC_SAVE_FAILED = "Sorry, failed to save profile!"
IDC_DEL_FAILED = "Sorry, failed to delete profile!"
IDC_SV_SET_AND_USE = "Do your want to save setting before selecting another profile?"
IDC_SAVE_SETTING = "Some authentication profiles have been modified. Do your want to save it?"
IDC_ADV_STATIC8 = "Band"

AUTHENTICATION_TIP_0010 = "Authenticating. Please wait a minute..."
AUTHENTICATION_TIP_TITLE = "Wireless Network Authentication"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;		Properties of EAP type
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

IDD_PROC_PROPERTY = "Properties of EAP type"
IDC_CHECK_SRV = "Validate Server Certificate"
IDC_CHECK_INTER = "Allow Intermedia Certification Authorities"
IDC_STATIC_TRUST = "Trusted Root Certification Authorities"
IDC_BUTTON_PROPERTY = "Property"



;;;;;End [English] Section;;;;;

















Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.86