1. res.exe Driver
2. Install.ini File Contents

Install.ini Driver File Contents (res.exe)

; Typical.ini - typical .INI file data

DeviceName = Magic S23 (Res.Ver.E)
IODecodeBits = 10               ; If SA12-SA15 pins connected - change to 16
DataType = Eeprom               ; Eeprom (default), Hostload
PeripheralPortLength = 8        ; 4 (default), 8
;PnpVersion = 1.0
;VendorVersion = 0.1
PossibleDMA = 0 1 3
PossibleIRQ = 5 7 9 11 12 15
OemId = 0D                      ; Assigned by Crystal for Acer add-on card
Serial Number = 0xFFFFFFFF      ; PnP Isolation Serial number, 1 is default

;[LDNULL]
;Name = NULL
;;;;;LogicalId = CSCFFFF

;;;;;NullBase = D34
;;;;;NullAlign = 1
;;;;;NullLength = 5

[LD0]
Name = WSS/OPL/SB               ; Logical Device 0 - Wss, Synthesis, SBPro
LogicalID = CSC0000

Choice = Default
WssIrq = 5,7                    ; Shared between Wss and SBPro devices
WssDmaPlay = 1                  ; Shared between Wss and SBPro devices
WssDmaCapture = 0,1,3           ; DMA select 1 - Full Duplex support
WssBase = 0x534                 ; Windows Sound System I/O Base Address
SynBase = 0x388                 ; Synthesis I/O Base Address

SbBase = 0x220                  ; SBPro Compatible I/O Base Address
SbBaseEnd = 0x240               ; range end
SbAlign = 0x20                  ; 32 byte alignment
SbLength = 0x10                 ; 16 ports

Choice = Default
WssIrq = 5,7,9,11               ; Shared between Wss and SBPro devices
WssDmaPlay = 1,3                ; Shared between Wss and SBPro devices
WssDmaCapture = 0,1,3           ; DMA select 1 - Full Duplex support
WssBaseStart = 0x534            ; Windows Sound System I/O Base Address
WssBaseEnd = 0xF44              ; range end
WssAlign = 0x04                 ; 4 byte alignment
WssLength = 0x04                ; 4 ports

SynBaseStart = 0x388            ; Synthesis I/O Base Address
SynBaseEnd = 0x3F8              ; range end
SynAlign = 0x08                 ; 8 byte alignment
SynLength = 0x04                ; 4 ports

SbBaseStart = 0x220             ; SBPro Compatible I/O Base Address
SbBaseEnd = 0x260               ; range end
SbAlign = 0x20                  ; 32 byte alignment
SbLength = 0x10                 ; 16 ports

;Choice = Default
;WssIrq = 5,7,9,11               ; Shared between Wss and SBPro devices
;WssDmaPlay = 1,3                ; Shared between Wss and SBPro devices
;WssBaseStart = 0x534            ; Windows Sound System I/O Base Address
;WssBaseEnd = 0xF44              ; range end
;WssAlign = 0x04                 ; 4 byte alignment
;WssLength = 0x04                ; 4 ports

[LD1]
Name = GAME                     ; Logical Device 1 - Game Port ie. Joystick
LogicalId = CSC0001             ; for automatic default driver loading

Choice=Default                  ; for GamePort I/O to 200
GameBase=200                    ;
Choice=Default                  ; Sam

GameBaseStart = 0x200           ; GAMEbase I/O base address - 200 hex
GameBaseEnd = 0x2F8             ; range end
GameAlign = 8                   ; 8 byte alignment
GameLength = 8                  ; 8 ports

[LD2]
Name = CTRL
LogicalID = CSC0010             ; Default

CtrlBaseStart = 0x120           ; Control Base Address
CtrlBaseEnd = 0x538             ; range end
CtrlAlign = 0x08                ; 8 byte alignment
CtrlLength = 0x08               ; 8 ports
CtrlIoBits = 16

[LD3]                           ; Logical Device 3 - MPU-401
Name = MPU
LogicalId = CSC0003             ; for automatic default driver loading

Choice= Default
MpuBase = 330
MpuIrq = 9

Choice= Default
MpuBaseStart = 0x300            ; MPUbase I/O address - 330 hex.
MpuBaseEnd = 0x378              ; range end
MpuAlign = 0x08                    ; 8 byte alignment
MpuLength = 2                   ; 2 ports
MpuIrq = 9,11,12,15             ; MPU IRQ

[END]