1. Firmware_dp5100x_de.zip Driver
2. Readme_en.txt File Contents

Readme_en.txt Driver File Contents (Firmware_dp5100x_de.zip)

Instructions for firmware update

1.	Write the disc-image (Firmware_xx.iso) to a CD. Please take a look to the help of your burn software how to do this. Just writing the file to CD is not right!
2. 	The folder structure on the created disc shoud be  /lg_dvd/firmware/upgrade/lg.
3. 	Put the CD into the dvd-player.
4. 	The TV displays a message while reading the firmware.
5. 	The tray opens automatically.
6. 	Remove the CD from the drive.
7. 	Press the "Arrow Up" button on the remote control.
8. 	The tray of the device closes automatically and the update starts. 

	ATTENTION: Don´t cancel the update progress!!

9.	The device restarts automatically after approximately two minutes.
10. 	The backgound is displayed.
11. 	Now you have to do a factory reset:
12. 	Press the "Setup" Key on the remote control.
13. 	Select "Display" from the menu.
14. 	In the Menu "TV Aspect", select 16:9 as picture format and highlight it.
15. 	Enter the code " 1 3 9 7 1 3 9" and press "Enter"

Hint:
The code must be entered quickly without any pause. If the blue screen mentioned at step 16 is not displayed, please enter the code again.
To enter the code again, go to step 14 and do it again.

16. 	A blue screen is displayed where you can see the new version.
17. 	Press "Enter" to exit the page.
18. 	Turn off the device.
19. 	Turn on the device. The update is finished.