1. 5702_558.zip Driver
2. release.txt File Contents

release.txt Driver File Contents (5702_558.zip)

                           Broadcom Corporation
                           16215 Alton Parkway,
                          Irvine, CA 92619-7013
			  
                              Release Notes
                              
                     Broadcom Advanced Control Suite      
            
                              May 13, 2002


Table of Contents
=================

  Introduction
  Installation
  Revision History
  
			       
Introduction
============
Broadcom Advanced Control Suite(BACS) is an application that contains
a set of utilities supporting diagnostics and monitoring for B57XX
network adapters.

BACS runs under Windows 98, Windows 98SE, Windows ME, Windows NT 4.0, 
Windows 2000, Windows XP, Windows .NET32, and Windows .NET64.


Intermediate driver installation (require for diagnostics):
==========================================================

Please note:
   fad.sys is required for 570X adapters.
   bcm42xhw.vxd is required for 440X adapters on Windows 98SE and Windows ME.

Install fad.sys for Windows 98SE and Windows ME:
   - Make sure network adapters are installed and configured properly.
   - Right click on 'Network Neighborhood' and select 'Properties'
   - Click 'Add' button.
   - Select 'Protocol' and click 'Add'.
   - Click 'Have Disk...'.
   - Choose the path that has system\drivers\fad9x.inf file.
   - Follow the instruction on each pop up dialog box to install Broadcom Frame Access Driver.
   - Restart machine.

InstallShield setup program will install bcm42xhw file.

From Control Panel (Start->Setting->Control Panel ), you should see a Broadcom NetXtreme
Gigabit Ethernet icon.  Double click the Broadcom icon to launch BACS.


Revision History
================
bacs_v2.32 (05/13/02)
  (Require BMAPI version 2.2.19 or above.)
  Updated .chm help file.
- Resolved ClearQuest ID:
  3889:  Change copyright year from 2001 to 2002 in BACS
  3930:  Change VLAN ID range on BACS  

bacs_v2.31 (04/17/02)
  (Require BMAPI version 2.2.19 or above.)
  Enhanced GUI on Load Balance/Virtual Lan tab.
- Resolved ClearQuest ID:  
  3890:  BASC does not show the virtual adapter (added feature) in BACS 2.30, if you create the team in BASP.
  3891:  The virtual adapter created under a team (new feature) should not mention that it's a VLAN 0.
  3892:  When you try to create a VLAN 0, BACS will not let you.
  3893:  Cannot add 3rd party supported adapter to a team
  3918:  Unable to create VLAN's without first selecting a team. 
  3919:  Unable to team with third party adapters under Windows XP

bacs_v2.30 (04/08/02)
  (Require BMAPI version 2.2.19 or above.)
- Resolved ClearQuest ID:  
  2146:  IP Address in BASCS v2.08 does not refresh.
  2307:  Advanced Server Control suite should show Virtual NIC info.
  3416:  Broadcom Control Suite displays static IP addresses after a team is created.
  3810:  W2K, .Net and NT4 Diag Tests with BASCS require a special selection order.  

bacs_v2.29 (04/02/02)
  (Require BMAPI version 2.2.18 or above.)
- Resolved ClearQuest ID:  
  3111:  BASCS release notes does not include .NET32 and .NET64
  3542:  570X adapters are intermittently displayed in the Diagnostic tab when the adapters are disabled.
  3731:  Cable Diagnostics test on Asante FriendlyNet GX4-800 will intermittently display 
         "Status: c7: Intermittent link, marginal SNR
  3794:  TX / RX Leds not working on the Control Suite
  3805:  W2K_AS: Change window size of "Installed Adpaters" in Broadcom Control Suite. 

bacs_v2.28 (03/26/02)
  (Require BMAPI version 2.2.18 or above.)
  Disable the Test buttons in Cable Length and Frequency tabs when end users come back from another tabs.
- Resolved ClearQuest ID:  
  3703:  No network connection after running Cable Analysis test

bacs_v2.27 (03/21/02)
  (Require BMAPI version 2.2.18 or above.)
  Compliance with the latest PCIID list.
- Resolved ClearQuest ID:  
  2799:  Gigabit Transmit & Gigabit Receive LED in Vital Signs intermittently turns on and off
  3686:  After installing Control Suite in 98 and Me, the font in the program is foreign characters.

bacs_v2.26 (03/19/02)
  (Require BMAPI version 2.2.16 or above.)
- Rename BASCS to BACS.  There is only one Broadcom Advanced Control Suite now for both Desktop
  and Server.
- Teaming support on all Windows W2K, all Windows XP except Home Edition, and Windows NT Server.
- Will not display a warning message if BASP is not installed on support OSes.

bacs_v2.25 (02/28/02)
  (Require BMAPI version 2.2.14 or above.)
- Resolved ClearQuest ID:  
  3281:  4401-4402 Broadcom Control Suite Failure during MAC-Loopback Test
  3376:  New VID 16A6 for 5702 in BACS shows bcm5798

bacs_v2.24 (02/19/02)
  (Require BMAPI version 2.2.12 or above.)
- Modify all BCM4401/4402 information to BCM440X
- Add localization support.

bacs_v2.23 (02/08/02)
  (Require BMAPI version 2.2.9 or above.)
- Diagnostics tab supports BCM4401/4402 adapters.

bacs_v2.22 (01/16/02)
  (Require BMAPI version 2.2.6 or above.)
- Add a new Firmware Version on Vital Sign tab.
- Resolved ClearQuest ID:  
  2769:  Cable analysis test could not be run on 5703
  2775:  Cable analysis test does not populate data for both Frequency and Length
  2797:  BACS Shortcut Tray disappears after rebooting the system

bacs_v2.21 (12/20/01)
- Fixed Cable Analysis and EEPROM diagnostic test.

bacs_v2.20 (12/20/01)
- Add a new ASIC Version field on Vital Sign tab.

bacs_v2.19 (12/13/01)
- Add Enable Tray Icon option on Vital Sign tab.
- Allow to start BACS from Start->Program with ControlSuite.exe program.
- Resolved ClearQuest ID:  
  2426:  Update the release.txt file.

bacs_v2.13 (09/13/01)
- Statistics Tab supports 64-bit counters.
- Support PCI-X 50MHZ and 100MHZ slots.
- Resolved ClearQuest ID:  
  2042:  no help file in BACS
  2321:  BACS v2.06 does not report correct info in PCI Bus Mode field

bacs_v2.06 (07/14/01)
- Support Whistler 64-bit version.
- Add Test LED to Diagnostics tab.
- Identify between copper and fiber adapter in Vital Sign tab.
- Support multiple lines tooltip.

bacs_v2.05 (07/08/01)
- Resolved ClearQuest ID:  
  1892:  Unfriendly error when running BACS on W2kServer & W2kProf  

bacs_v2.04 (06/28/01)
- First desktop version release.